Physics 451 - Laboratory Notebooks

There are no lectures and no textbook in this course so the Laboratory Notebook is one of the main interactions between us. A softside 9" x 12" "Computation Notebook" is much better than a 8" x 10" hardback book - please purchase one of those for this class.

The purpose of a Laboratory Notebook is to provide a record of what you did, why you did it and how you did it during each laboratory period. This record should be readable at some later time by you or anyone else.

At the beginning of a new experiment you should describe it, tell what you hope to accomplish and how you will be doing it.

Each day's entry should begin with a date, time, a statement of what you plan to do and why. Subsequent entries should include (for example) how you wired a cable; what purpose it served; problems you found and your solutions to them: e.g. "My connector was clearly not designed to be soldered to a wire".

All general specifications should be listed at the start of a run:

• "sample is KBr",
  
• "sample is water with a small amount of CuSO₄,
  
• "1st pulse width 55 microseconds, 2nd pulse width 98 microseconds."
  

Data should be taken in NEAT columns (until we start to take it on the computer).
Graphs are to be made and analyzed on a graphing program such as AXUM or a spread sheet such as EXCEL.

Systematic and experimental errors should be listed:

• "the pressure read 38mm corresponding to 2.18K but when the dewar is empty the pressure reads 4.5mm therefore the possible error is T is..."
  
• "The Hall probe reads 50 gauss but the drift is 10 gauss/minute..."
  

At the end of each day, make a summary of your accomplishments and unresolved proglems as well as your current plans for next time.

I will read the lab-books periodically and make comments on your progress in "lab-book construction".

Physics 451