DATE: 24-Oct-2012 TO: Hughes Electronics Products FROM: Dan Edmunds Physics Department Michigan State University Phone: (517) 884-5521 Email Edmunds@pa.msu.edu RE: Manufacture of the CMX-0 Mechanical Only Circuit Board -------------------------------- -- Good for -- -- -- -- Production -- -------------------------------- This is a Mechanical Only test card. All that I need is a rectangular card routed to size with the indicated holes drilled in it. There is no copper, no solder mask, no silkscreen. Data for Manufacturing the CMX-0 Mechanical Only Circuit Board ------------------------------------------------------------------- Circuit board name: CMX-0 Mechanical Only Quantity: either 1 or 2 (to be specified when ordered) Circuit Board Material: FR4 All design data is in mm. Circuit Board Thickness: nominal 1.6 mm ( 0.0625 inch ) Board Size: Rectangular 400 mm in X by 366.7 mm in Y Holes: There are 6 different drill hole sizes. Diameter Drill Finished Position Size mm Count Plated Function -------- -------- ----- ------ ------------------------- 1 0.90 906 no DIN Z-Pack Connector Pins 2 1.30 12 no DIN Power Connector Pins 3 2.00 3 no Power Connector Alignment 4 2.70 8 no Front Panel Mounting M2.5 5 3.00 16 no Stiffener Bars 4-40 6 3.175 2 no Guide Pin Receptacle Gerber Files: File Name Description Data Type --------- -------------------------------------- --------- artwork_1 Test Plot - Board Outline with Positive Dimensions, and some component outlines Contact and Shipping Information: Daniel Edmunds Physics Department Bio-Medical Physical Sciences Bldg. 567 Wilson Road Michigan State University East Lansing, MI 48824-2320 Phone: (517) 884-5521 Email: edmunds@pa.msu.edu FAX: (517) 355-6661 Backup Contact: Philippe Laurens Phone: (517) 884-5522