#
#           CMX Backplane Connector J9   Net-to-Pin  File
#         -------------------------------------------------
#
#
#                                                 Original Rev. 08-Sep-2011
#                                              Most Recent Rev. 16-Jan-2013
#
#
#  This is the N2P file for Backplane Connector J9.
#  This is the power connector at the bottom of the CMX card.
#
#  Connector  J9  is geometry  conn_power_zpack  in the CMX card design.
#
#  Define the nets going to each contact in this power connector.
#
#    The upper contact, i.e. contact #2,  is pin numbers
#    1, 3, 4, 5.  This is the 3.3 Volt backplane bus and
#    is not used on the CMX card.  These will be NO_CONN
#    single point nets in the overall CMX net list.
#
#    The middle contact, i.e. contact #6,  is pin numbers
#    8, 9, 11, 12.  This is the power ground connection
#    (return) on the CMX card.
#
#    The bottom contact, i.e. contact #10,  is pin numbers
#    14, 15, 16, 17.  This is the backplane 5.0 Volt power
#    bus supply to the CMX card.
#


NET  'No_Conn_J9_PIN_1'   J9-1    # No Connection to J9 Pin 1
NET  'No_Conn_J9_PIN_3'   J9-3    # No Connection to J9 Pin 3
NET  'No_Conn_J9_PIN_4'   J9-4    # No Connection to J9 Pin 4
NET  'No_Conn_J9_PIN_5'   J9-5    # No Connection to J9 Pin 5



NET  'GROUND'          J9-8    J9-9   J9-11   J9-12


NET  'BK_PLN_5V0'     J9-14   J9-15   J9-16   J9-17