#
#                   CMX-0  Nets File
#
#          DCI and GTX Calibration  Resistors
#        --===-----===============-------------
#
#
#                                                 Original Rev. 16-Nov-2012
#                                              Most Recent Rev. 31-Dec-2012
#
#
#
#  This file holds the nets for  ALL  of the
#
#    - DCI Resistors for the 400 Backplane inputs
#
#    - GTX Termination Calibration Resistors
#
#  for both the Base Function and Topological Processor FPGAs.
#
#
#
#  This net list file includes nets to the following components:
#
#            U1   Base Function FPGA
#
#            U2   Topological Progessor FPGA
#
#     R191:R198   DCI Resistors on the Base Function FPGA
#
#          R199   GTX Termination Calibration Resistor
#                   on the Base Function FPGA
#
#          R200   GTX Termination Calibration Resistor on 
#                   on the Topological Processor FPGA
#
#


#
#  Connect the 8  DCI  Resistors
#
#  Recall that the VRN pin is pulled up to VCCO
#     and that the VRP pin is pulled down to ground.
#
#  These are  ?? Ohm resistors.
#

NET  'P0TO3_DCI_P'      R191-1
NET  'GROUND'           R191-2

NET  'P0TO3_DCI_N'      R192-1
NET  'BULK_2V5'         R192-2



NET  'P4TO7_DCI_P'      R193-1
NET  'GROUND'           R193-2

NET  'P4TO7_DCI_N'      R194-1
NET  'BULK_2V5'         R194-2



NET  'P8TO11_DCI_P'     R195-1
NET  'GROUND'           R195-2

NET  'P8TO11_DCI_N'     R196-1
NET  'BULK_2V5'         R196-2



NET  'P12TO15_DCI_P'    R197-1
NET  'GROUND'           R197-2

NET  'P12TO15_DCI_N'    R198-1
NET  'BULK_2V5'         R198-2




#
#  Connect the GTX Termination Calibration resistor
#  for the Base Function FPGA
#
#  This is a precision 100 Ohm resistor.
#  See Chapter 5 page 274 of the
#  Virtex-6GTX User Guide.
#
#  The other half of these connections is in:
#
#     ..../Base_Fpga_Assign/highspeed_transmitters_fpga_n2r.txt
#

NET  'BF_MGTRREF'    R199-1    # Base Function FPGA  MGTRREF pin

NET  'BF_GTX_AVTT'   R199-2    # Base Function FPGA  MGTAVTTRCAL pin




#
#  Connect the GTX Termination Calibration resistor
#  for the Topological Processor FPGA
#
#  This is a precision 100 Ohm resistor.
#  See Chapter 5 page 274 of the
#  Virtex-6GTX User Guide.
#
#  The other half of these connections is in:
#
#     ..../TP_Fpga_Assign/highspeed_receivers_fpga_n2r.txt
#

NET  'TP_MGTRREF'    R200-1    # Topological FPGA  MGTRREF pin

NET  'TP_GTX_AVTT'   R200-2    # Topological FPGA  MGTAVTTRCAL pin