#
#                     CMX-0  Nets File
#
#           Front-Panel  Access Signals  #1 and #2
#          --------------==============------------
#
#
#                                                 Original Rev.  17-June-2013
#                                              Most Recent Rev.  23-Sept-2013
#
#
#
#  This file holds the nets for the Front Panel
#  Access Signals #1 and #2.
#
#  The source of these two  Front Panel Access Signals
#  is DeBug signals from either the Board Support FPGA,
#  the Base Function FPGA, or the Topological Processing FPGA.
#
#  The source of these Front Panel Access Signals is
#  selected with jumpers  R365  through  R370.
#
#  These two Front Panel Access Signals are 3.3V CMOS
#  level with 100 Ohm back terminator resistors.  These
#  signals are driven by a 74LVC04A chip.
#
#  Front Panel Access Signal #1  is  J12 pin #15.
#  Front Panel Access Signal #2  is  J12 pin #16.
#
#  Note that  J12  pins 1, 3, 5, 7, and 9  are Grounds.
#
#



#  Resistor Jumpers  R365 through R370  to select
#  the source of the two Front Panel Access Signals.

#  Select the source of FP Access Signal #1

NET  'BSPT_DEBUG_8'   R365-1     # BSPT source for FP Access Signal 1
NET  'BF_DEBUG_8'     R366-1     # BF   source for FP Access Signal 1
NET  'TP_DEBUG_8'     R369-1     # TP   source for FP Access Signal 1

#  Select the source of FP Access Signal #2

NET  'BSPT_DEBUG_9'   R367-2     # BSPT source for FP Access Signal 2
NET  'BF_DEBUG_9'     R368-2     # BF   source for FP Access Signal 2
NET  'TP_DEBUG_9'     R370-2     # TP   source for FP Access Signal 2




#  Selected FP Access Signals to the Driver Inputs

NET  'SELECTED_FP_ACCESS_1'   R365-2   R366-2    R369-2   # Selected FP Access 1

NET  'SELECTED_FP_ACCESS_1'   R361-1        # Pull-Up on FP Access 1

NET  'SELECTED_FP_ACCESS_1'   U323-13       # Driver input for FP Access 1


NET  'SELECTED_FP_ACCESS_2'   R367-1   R368-1    R370-1    # Selected FP Access 2

NET  'SELECTED_FP_ACCESS_2'   R362-1        # Pull-Up on FP Access 2

NET  'SELECTED_FP_ACCESS_2'   U323-11       # Driver input for FP Access 2


NET  'BULK_3V3'    R361-2   R362-2          # 3V3 to the Pull-Ups




#  Driver output pins to the J12 FP Access Signal Pins

NET  'FP_ACCESS_1_DRIVE'   U323-12   R363-2   # FP Access 1 to Series Term
NET  'FP_ACCESS_SIGNAL_1'  J12-15    R363-1   # FP Access Signal #1

NET  'FP_ACCESS_2_DRIVE'   U323-10   R364-2   # FP Access 2 to Series Term
NET  'FP_ACCESS_SIGNAL_2'  J12-16    R364-1   # FP Access Signal #2