# # This is the Key In Components File for the # HTM-0 ATLAS L1Calo HTM Card # --------=====----------------------------------- # # Original Rev. 30-Jan-2018 # Most Recent Rev. 30-Jan-2018 # # # Recall that all references to the HTM card will refer to # it in "Standard Orientation". In Standard Orientation # the component side is up facing the observer, the backplane # connectors are to the right, and the front panel is to the left. # # Recall also that the ATCA Standards dimension the board with # respect to the center of the mounting hole in the bottom # left-hand corner, i.e. the SW corner. The center of # this hole is left in X by 3.57 mm from the front edge of # the board and up by 5.55 mm from the bottom edge of the # board. In the HTM card Mentor layout the board's SW # corner will be 0,0 and all dimensions will be in mm. # # Recall also the the shape of the L1Calo ATCA boards is # defined by ARL drawing 1-TE-0183-012-00-B from March-2015 # and does not exactly match the PICMG 3.0 ATCA specification. # # Recall also that the HTM card uses ADFplus Zone 2 connectors. # The locations of these connectors on the PCB is defined in # PICMG 3.1 page 117 (not in PICMG 3.0). # # UNITS MM # # Board_Location # Ref Part_Number Symbol Geometry X Y Properties #----- ----------- ------ ------------------ -------------- ---------- # # # BACKPLANE Connector Components # # Key In Components File for the # HTM-0 ATLAS L1Calo HTM Card # ---=====----------------------------- # # Original Rev. 30-Jan-2018 # Most Recent Rev. 3-Feb-2018 # # # This Comps file holds all of the Backplane components # for all 3 Zones of the Backplane # # and # # the Vert and Horz Air Flow Control Baffles #. # # # Board_Location # Ref Part_Number Symbol Geometry X Y Properties #----- ----------- ------ ------------------ -------------- ---------- # K1 TE_1-1469373-1 SY_JUNK ATCA_Guide_Pin_Receptacle 273.50 188.10 1 0 # These locations are for ADFplus type of Zone 2 connectors. # These locations assume that in the ATCA connector location # specification for pin "P1" refers to pin "A1" in the # drawing of the SDFplus connector. J23 TE_2065657-1 SY_JUNK ATCA_Zone_2_Conn 277.90 100.80 1 0 # Place the Zone 1 connector. P10 TE_1766500-1 SY_JUNK ATCA_Zone_1_Conn 255.23 22.00 1 0 # # Pleace the Vert and Horz Air Flow Control Baffles # Horz_Air_Baffle NOT_A_PART SY_JUNK Air_Baffle_Horz 127.46 251.00 1 0 Vert_Air_Baffle NOT_A_PART SY_JUNK Air_Baffle_Vert 263.50 251.00 1 0 # # HTM ATCA Comps # # Key In Components File for the # HTM-0 ATLAS L1Calo HTM Module # ---=====----------------------------- # # Original Rev. 1-Feb-2018 # Most Recent Rev. 28-Mar-2018 # # # This file holds all of the ATCA components on the # HTM card. This includes the ATCA power supply # components and all other comps directly related to ATCA. # # # # # Board_Location # Ref Part_Number Symbol Geometry X Y Properties #----- ----------- ------ ------------------ -------------- ---------- # # # ATCA Power Components # F1 Fuse_SMD_3A SY_JUNK Fuse_SMD 210.00 20.10 1 0 F2 Fuse_SMD_3A SY_JUNK Fuse_SMD 210.00 12.00 1 0 F3 Fuse_SMD_3A SY_JUNK Fuse_SMD 230.00 20.10 1 0 F4 Fuse_SMD_3A SY_JUNK Fuse_SMD 230.00 12.00 1 0 R951 Res_100_Ohm_2010 SY_JUNK res_2512 231.60 12.00 2 180 R952 Res_100_Ohm_2010 SY_JUNK res_2512 231.60 20.10 2 180 L1 Wurth_74466340007 SY_JUNK Wurth_Com_Mode_Ind 185.0 28.0 1 0 # # Input Capacitors for the Isolated +12V Supply # C951 Not_A_Part SY_JUNK res_1206_1sb 177.00 17.00 1 180 C952 Not_A_Part SY_JUNK res_1206_1sb 177.00 39.00 1 180 C954 Cap_68_uFd_100V SY_JUNK ELECTRO_H 146.00 28.00 1 90 C955 Cap_68_uFd_100V SY_JUNK ELECTRO_H 162.00 28.00 1 90 # # +12 Volt Isolated Power Module # Power_12V SynQor_PQ60120 SY_JUNK ATCA_Power_12V 106.50 28.00 1 0 # # Output Capacitors for the Isolated +12V Supply # C957 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 73.80 28.10 2 270 C958 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 77.10 28.10 2 270 C959 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 85.60 28.10 2 270 C960 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 88.90 28.10 2 270 C961 Cap_22_uFd_Tant_V SY_JUNK Tant_V_Case 93.40 28.10 2 90 C962 Cap_22_uFd_Tant_V SY_JUNK Tant_V_Case 98.70 28.10 2 90 C963 Cap_330_uFd_25V SY_JUNK ELECTRO_G 56.00 28.10 1 90 C964 Cap_330_uFd_25V SY_JUNK ELECTRO_G 68.00 28.10 1 90 # # AKA "component" for the Remote Sense Ground Connection # and for the Remote Sense on the Positive output terminal # of the Isolated +12V Supply # AKA1 Not_a_Part SY_JUNK AKA_1MM20 73.00 42.00 1 0 AKA2 Not_a_Part SY_JUNK AKA_1MM20 73.00 14.00 1 0 # # The ATCA ESD Strip on the Bottom Edge of Side 1 # # and the Silkscreen KEEP-OUT area boarders and labels, # and the mounting screw hole (and component pin) for # the Lower Handle on the front of the card. # # This is placed as TWO Geometries: # # ESD_Strip_Mid_Back SMD Component Pins 2 and 1 ESD_STRIP_MB # ESD_Strip_Front_Only THD Component Pin 3 ESD_STRIP_FO # ESD_STRIP_MB NOT_A_PART SY_JUNK ESD_Strip_Mid_Back 0.00 0.00 1 0 ESD_STRIP_FO NOT_A_PART SY_JUNK ESD_Strip_Front_Only 0.00 0.00 1 0 # # ATCA ESD Strip Resistors and Optional Grounds Connecting Jumper/Resistor # R957 Res_1_Meg_Ohm_1206 SY_JUNK res_1206 146.00 10.00 2 90 R958 Res_1_Meg_Ohm_1206 SY_JUNK res_1206 162.00 10.00 2 90 R959 Res_1_Meg_Ohm_1206 SY_JUNK res_1206 23.00 10.00 2 90 # # WTerm Vias for the wire connections to the Front Panel On/Off Switch # WTERM11 Not_a_Part SY_JUNK Wrap_1mm1 60.00 50.00 1 0 WTERM12 Not_a_Part SY_JUNK Wrap_1mm1 60.00 45.00 1 0 # # FPGA Mezzanine on the HTM Component # # Key In Components File for the # HTM-0 ATLAS L1Calo HTM Module # ----------------------------------------- # # Original Rev. 1-Feb-2018 # Most Recent Rev. 1-Feb-2018 # # # This file holds all of the FPGA Mezzanine that is # mounted or shown on the HTM Module. # # This file is setup as a Relatively Positioned Component Set, # i.e. the Center is at 0,0 and then everything in here has # the exact dimentions of the FPGA Mezzanine Card itself. # # This Relatively Positioned Component Set is then moved as # a whole to its final position on the HTM Module PCB. # # This Relatively Positioned Component Set consists of: # # 3 Samtec 160 pin ASP connectors J1, J2, J3 and # the FPGA Silkscreen component # # Note that the FPGA Mezzanine Silkscreen component holds the # real mounting holes in the HTM for the FPGA Mezzanine card. # # # # Board_Location # Ref Part_Number Symbol Geometry X Y Properties #----- ----------- ------ ------------------ -------------- ---------- # # # The FPGA Mezzane Center is: X = 0.0 mm Y = 0.0 mm # # # Place the silkscrren outlint of the ROD mezzanine. # # We pickup the Drill Holes for the standoffs to # mount the FPGA Mezz and HTM together from the # FPGA_Silk component. In this way these screw holes # move around whenever this Relatively Positioned # Component Set is moved. # FPGA_Mezz Not_a_Part SY_JUNK FPGA_Silk 175.000000 125.000000 1 0 # # Now the 3 Samtec 160 pin (172 pin) ASP connectors. # # These are real components on the HTM card pcb. # J3 Samtec_ASP-122953-01 SY_JUNK Samtec_ASP_160 210.560000 125.000000 1 90 J2 Samtec_ASP-122953-01 SY_JUNK Samtec_ASP_160 175.000000 160.560000 1 0 J1 Samtec_ASP-122953-01 SY_JUNK Samtec_ASP_160 175.000000 89.440000 1 180 # # FRONT PANEL Components # # Key In Components File for the # HTM-0 ATLAS L1Calo HTM Module # ---=====----------------------------- # # Original Rev. 3-Feb-2018 # Most Recent Rev. 21-Mar-2018 # # # This Comps file holds ALL of the HTM Module components # that touch or go through the HTM's Front Panel. # # # Ethernet Front Panel Connector (Condo 1x2) # TE Connectivity 1888653-4 Condo RJ-45 connectors. # # The X dimension of these Condo RJ45s is set so # that they stick out of the front panel the correct # distance. Set at this X dimension these connectors # require a notch to be cut in the front edge of the PCB. # # In theory their X should be 18.58 mm with a # 8.03 mm deep PCB cutout. # # # At the Top of the Front Panel there are two MTP / MPO # feedthrough connectors. These are just Silkscreen # and for reference. They are not electrical and they # have no pins. They are NOT in the Bill of Materials. # MTP2 Not_A_Part SY_JUNK MTP_Feedthrough -5.80 285.00 1 0 MTP1 Not_A_Part SY_JUNK MTP_Feedthrough -5.80 265.00 1 0 # # Front Panel LEDs: # # The Layout from Top to Bottom: # # - 8x general purpose LEDs LED1 : LED8 # controlled by FPGA Select I/O signals # # - 1x Iso_12V Power LED LED17 # # - 4x LEDs in the Upper J14 RJ45 Ethernet Connector # # - 4x LEDs in the Lower J13 RJ45 Ethernet Connector # LED1 LED_676_RED SY_JUNK led_single_smd 7.65 235.00 1 0 LED2 LED_673_GREEN SY_JUNK led_single_smd 7.65 226.00 1 0 LED3 LED_676_YELLOW SY_JUNK led_single_smd 7.65 217.00 1 0 LED4 LED_676_RED SY_JUNK led_single_smd 7.65 208.00 1 0 LED5 LED_673_GREEN SY_JUNK led_single_smd 7.65 199.00 1 0 LED6 LED_676_YELLOW SY_JUNK led_single_smd 7.65 190.00 1 0 LED7 LED_676_RED SY_JUNK led_single_smd 7.65 181.00 1 0 LED8 LED_673_GREEN SY_JUNK led_single_smd 7.65 172.00 1 0 LED17 LED_673_GREEN SY_JUNK led_single_smd 7.65 163.00 1 0 # # Under the LEDs we have the two LEMO Clock Monitor Connectors # J16 LEMO_EPK.00.250.NTN SY_JUNK LEMO_Conn 9.00 145.00 1 0 J15 LEMO_EPK.00.250.NTN SY_JUNK LEMO_Conn 9.00 130.00 1 0 # # Under the LEMO Clock Monitor Connectors # we have the two Condo RJ45 Ethernet Connectors # J14 Conn_Condo_RJ45 SY_JUNK RJ45_1x2 17.55 102.00 1 270 J13 Conn_Condo_RJ45 SY_JUNK RJ45_1x2 17.55 80.00 1 270 # # Front Panel Access Connector # This 2x8 header for JTAG and Access Signals # is at the Bottom of the Front Panel # J12 Conn_2x8 SY_JUNK Conn_2x8_Header 3.90 48.00 1 0 # # JTAG and Access Signal Comps # # Key In Components File for the HTM Module # -------------------------------------------- # # # Original Rev. 3-Feb-2018 # Most Recent Rev. 21-Apr-2018 # # # This file holds all of the JTAG and Access Signal components. # # These components are associated with the Front Panel J12 Connector. # # # Most of these components have reference Designators # in the range of ?? through ??. # # # # # JTAG and Access Signal Components # # # Board_Location # Ref Part_Number Symbol Geometry X Y Properties #----- ----------- ------ ------------------ -------------- ---------- # # # JTAG and Access Signal Input and Output 3V3 to 3V3 "Translator" Buffer # # located near the front panel J12 "Access" connector. # U351 IC_74AVCH8T245 SY_JUNK tssop_24 22.00 46.00 1 0 # # Default Input Pull-Up Resistors and Series Terminator Resistors # # for the four JTAG Signals: # R351 Res_4700_Ohm_0603 SY_JUNK res_0603 12.00 42.00 1 180 R352 Res_4700_Ohm_0603 SY_JUNK res_0603 12.00 44.00 1 180 R353 Res_33_Ohm_0603 SY_JUNK res_0603 12.00 46.00 1 180 R354 Res_4700_Ohm_0603 SY_JUNK res_0603 12.00 48.00 1 180 R357 Res_33_Ohm_0603 SY_JUNK res_0603 39.00 49.00 2 270 R358 Res_33_Ohm_0603 SY_JUNK res_0603 36.50 49.00 2 270 R359 Res_33_Ohm_0603 SY_JUNK res_0603 34.00 49.00 2 270 R360 Res_33_Ohm_0603 SY_JUNK res_0603 198.00 144.00 2 270 # # Series Terminator Resistors for the two Access Signals: # R361 Res_33_Ohm_0603 SY_JUNK res_0603 199.80 108.50 2 270 R362 Res_33_Ohm_0603 SY_JUNK res_0603 196.70 108.50 2 270 R355 Res_33_Ohm_0603 SY_JUNK res_0603 12.00 52.00 1 180 R356 Res_33_Ohm_0603 SY_JUNK res_0603 12.00 54.00 1 180 # # ByPass Capacitors for the "translator" buffer chip # C351 Cap_100_nFd_0603 SY_JUNK cap_0603 22.00 53.00 2 0 C352 Cap_220_nFd_0603 SY_JUNK cap_0603 22.00 39.00 2 0 C353 Cap_220_nFd_0603 SY_JUNK cap_0603 22.00 58.00 1 0 C354 Cap_100_nFd_0603 SY_JUNK cap_0603 22.00 34.00 1 0 # # Fuse for the JTAG Reference Power on pin #2 of front panel connector J2 # # located on side 1 near J2. # F5 Fuse_SMD_3A SY_JUNK Fuse_SMD 10.00 34.00 1 0 # # Ethernet Transformer Components # # for RJ45 Ethernet Connector RJ14 # # HTM Circuit Board # # # Original Rev. 3-Feb-2018 # Most Recent Rev. 2-Mar-2018 # # # This file holds the TRC Components for 2 complete # 10/100/1000 Base-T Ethernet connections that are # services by Ethernet "Transformer" number 2. # # - First place the Ethernet Transformer #1 itself. # # - Then the 4 capacitors are the Phys side center tap bypass caps. # # - Then the 4 resistors are the Cable side center tap Bob Smith Termination. # # - Then the 1 nFd capacitor ties the Bob Smith Termination to ground. # # - First there are all 9 components for one Ethernet connection # and then the 9 components for the other Ethernet connection # that is serviced by this Ethernet "Transformer". # # The contents of this file will be shifted by Delta_X Delta_Y # before they are actually placed in the design. # # This file holds the RC Components for # Etherent "Transformer" Number: 1 # # Board_Location # Ref Part_Number Symbol Geometry X Y Properties #----- ----------- ------ ------------------ -------------- ---------- # TRANS1 Pulse_HX5201NL SY_JUNK DUAL_BASE_T_MAG 36.00 102.00 1 90 C301 Cap_100_nFd_0603 SY_JUNK cap_0603 43.00 110.00 2 270 C302 Cap_100_nFd_0603 SY_JUNK cap_0603 41.30 110.00 2 270 C303 Cap_100_nFd_0603 SY_JUNK cap_0603 39.50 110.00 2 270 C304 Cap_100_nFd_0603 SY_JUNK cap_0603 37.80 110.00 2 270 R301 Res_49R9_Ohm_0603 SY_JUNK res_0603 34.20 110.00 2 90 R302 Res_49R9_Ohm_0603 SY_JUNK res_0603 32.50 110.00 2 90 R303 Res_49R9_Ohm_0603 SY_JUNK res_0603 30.70 110.00 2 90 R304 Res_49R9_Ohm_0603 SY_JUNK res_0603 29.00 110.00 2 90 C305 Cap_47_nFd_0603 SY_JUNK cap_0603 36.00 110.00 2 270 C306 Cap_100_nFd_0603 SY_JUNK cap_0603 43.00 94.00 2 90 C307 Cap_100_nFd_0603 SY_JUNK cap_0603 41.30 94.00 2 90 C308 Cap_100_nFd_0603 SY_JUNK cap_0603 39.50 94.00 2 90 C309 Cap_100_nFd_0603 SY_JUNK cap_0603 37.80 94.00 2 90 R306 Res_49R9_Ohm_0603 SY_JUNK res_0603 34.20 94.00 2 270 R307 Res_49R9_Ohm_0603 SY_JUNK res_0603 32.50 94.00 2 270 R308 Res_49R9_Ohm_0603 SY_JUNK res_0603 30.70 94.00 2 270 R309 Res_49R9_Ohm_0603 SY_JUNK res_0603 29.00 94.00 2 270 C310 Cap_47_nFd_0603 SY_JUNK cap_0603 36.00 94.00 2 90 # # LED Associated Components # # Key In Components File for the HTM Module # -------------------------------------------- # # Original Rev. 3-Feb-2018 # Most Recent Rev. 21-Mar-2018 # # # This Comps file holds the LED Series Resistors # and all other LED associated components for all LEDs. # # - Typically these series resistors are between the LED's # Anode and the Bulk_3V3 supply. # # - Sometimes these resistors are between the LED Anode and # the supply voltage for that LED, e.g. Iso_12V LED. # # - For the individual LEDs (i.e. not part of the RJ45s) # # pin #1 is to the West and is the Cathole # pin #2 is to the East and is the Anode # # # The Reference Designators for the LED series resistors # are 200 greater then the reference designator for the LED, # LE1 uses series resistor R201. # # # # Notes: # # The series resistors for the 0805 size LEDs # driven by the 1V8 3V3 Translator chips are # shown in the following table. Note that the # maximum low output voltage from the translator # is 0.45 Volt. The expected drop across the LED # is shown in the second column. # # Value # Theory Actually # Value Used # --------- --------- # Red ( 3.3V - 1.9V - 0.45V ) / 4 mA = 238 Ohm --> 240 Ohm # Yellow ( 3.3V - 1.9V - 0.45V ) / 4 mA = 238 Ohm --> 240 Ohm # Green ( 3.3V - 2.1V - 0.45V ) / 4 mA = 188 Ohm --> 240 Ohm # Blue ( 5.0V - 3.25V - 0.45V ) / 4 mA = 325 Ohm --> 330 Ohm # # # # So using the 240 Ohm series resistors the current that we # actually expect through the different types of LEDs in the # circuits driven by the translator chips is: # # # Red ( 3.3V - 1.9V - 0.45V ) / 240 Ohm --> 3.96 mA # Yellow ( 3.3V - 1.9V - 0.45V ) / 240 Ohm --> 3.96 mA # Green ( 3.3V - 2.1V - 0.45V ) / 240 Ohm --> 3.13 mA # Blue ( 5.0V - 3.25V - 0.45V ) / 330 Ohm --> 3.94 mA # # # # The series resistors for the yellow and green LEDs driven # directly by the Broadcom Swithes are all shown at 220 Ohm # in their Demo board. Their specification sheet showns a # maximum Low Voltage output of 0.5 V at 8 mA for a 3V3 # output pin. With this specification and 240 Ohm resistors # the yellow and green LEDs will probably flow: # # # Yellow ( 3.3V - 1.9V - 0.50V ) / 240 Ohm --> 3.75 mA # Green ( 3.3V - 2.1V - 0.50V ) / 240 Ohm --> 2.92 mA # # # # So for now we will start with all LED series resistors # having a value of 240 Ohms except for the Blue LEDs # which run from 5 Volts will use a 330 Ohms series resistor. # Once we see the HTM Front Panel in operation we may need # to adjust the brightness of some of the LEDs. # # # The Blue LEDs are: LED4 ATCA Blue driven by IPMC # LED48 ROD pin C3 driven by U552 # LED49 ROD pin C4 driven by U552 # # # # # Board_Location # Ref Part_Number Symbol Geometry X Y Properties #----- ----------- ------ ------------------ -------------- ---------- # # # LED Series Resistors Starting from the Top of the card # with the resistors for the upper block # block of 8 general purpose LEDs. # # These are series resistors between an LED's # Anode and the Bulk_3V3 supply. # R201 Res_240_Ohm_0603 SY_JUNK res_0603 15.00 235.00 1 0 R202 Res_240_Ohm_0603 SY_JUNK res_0603 15.00 226.00 1 0 R203 Res_240_Ohm_0603 SY_JUNK res_0603 15.00 217.00 1 0 R204 Res_240_Ohm_0603 SY_JUNK res_0603 15.00 208.00 1 0 R205 Res_240_Ohm_0603 SY_JUNK res_0603 15.00 199.00 1 0 R206 Res_240_Ohm_0603 SY_JUNK res_0603 15.00 190.00 1 0 R207 Res_240_Ohm_0603 SY_JUNK res_0603 15.00 181.00 1 0 R208 Res_240_Ohm_0603 SY_JUNK res_0603 15.00 172.00 1 0 # # LED Series Resistors Finally the 8 series Resistors for the # 2 Condo RJ-45 connectors. # Each of these RJ45 connectors has 4 LEDs. # # These are series resistors between an LED's # Anode and the Bulk_3V3 supply. # R209 Res_240_Ohm_0603 SY_JUNK res_0603 10.00 117.00 2 90 R210 Res_240_Ohm_0603 SY_JUNK res_0603 12.00 117.00 2 90 R211 Res_240_Ohm_0603 SY_JUNK res_0603 14.00 117.00 2 90 R212 Res_240_Ohm_0603 SY_JUNK res_0603 16.00 117.00 2 90 R213 Res_240_Ohm_0603 SY_JUNK res_0603 10.00 65.00 2 90 R214 Res_240_Ohm_0603 SY_JUNK res_0603 12.00 65.00 2 90 R215 Res_240_Ohm_0603 SY_JUNK res_0603 14.00 65.00 2 90 R216 Res_240_Ohm_0603 SY_JUNK res_0603 16.00 65.00 2 90 # # LED Series Resistors for the ISO_12V Power LED LED17 # # This 3x series resistor is between the # LED's Anode and the ISO_12V supply. # R217 Res_1k_Ohm_0603 SY_JUNK res_0603 15.00 160.00 1 0 R218 Res_1k_Ohm_0603 SY_JUNK res_0603 15.00 163.00 1 180 R219 Res_1k_Ohm_0603 SY_JUNK res_0603 15.00 166.00 1 0 # # LED Translator/Driver for the upper 8 General Purpose LEDs # U201 IC_74AVCH8T245 SY_JUNK tssop_24 33.00 204.00 1 0 C201 Cap_220_nFd_0603 SY_JUNK cap_0603 33.00 198.00 1 180 C202 Cap_220_nFd_0603 SY_JUNK cap_0603 33.00 210.00 1 0 # # LED translator/Driver for the lower 8 RJ45 LEDs. # U202 IC_74AVCH8T245 SY_JUNK tssop_24 33.00 164.00 1 90 C203 Cap_220_nFd_0603 SY_JUNK cap_0603 27.00 164.00 1 90 C204 Cap_220_nFd_0603 SY_JUNK cap_0603 39.00 164.00 1 270 # # BULK_3V3 Supply Components # # BULK_3V3 DCDC Linear Regulator 3 Amp # ---========-------------------------------- # # # Original Rev. 3-Feb-2018 # Most Recent Rev. 27-Mar-2018 # # # # This file holds all of the components involved with # BULK_3V3 Linear Regulator on the HTM Module. # # This is a 3 Amp LT1764 Linear Regulator for the BULK_3V3 bus. # # This is a non-relatively_positioned_component_set version of DCDC-4. # # The HTM has it own private version of the LT1764A geometry. # # # # Board_Location # Ref Part_Number Symbol Geometry X Y Properties #----- ----------- ------ ------------------ -------------- ---------- # U101 IC_Linear_LT1764A SY_JUNK LT1764A_HTM 152.00 211.00 1 270 # # Input Voltage Drop and High Frequency Noise Filter # C100 Cap_220_nFd_0603 SY_JUNK cap_0603 124.70 230.00 2 0 R105 Res_3R3_Ohm_2512 SY_JUNK res_2512 126.70 235.00 1 0 R106 Res_3R3_Ohm_2512 SY_JUNK res_2512 141.70 235.00 1 0 L101 Wurth_744311470 SY_JUNK Wurth_6969_Ind 144.50 220.00 1 270 # # Input Filter for BULK_3V3 # and its Enable Shut Down jumper # C101 Cap_220_nFd_0603 SY_JUNK cap_0603 147.50 211.80 1 90 C102 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 139.50 214.00 1 0 C106 Cap_22_uFd_Tant_V SY_JUNK Tant_V_Case 137.00 209.50 1 180 C107 Cap_330_uFd_25V SY_JUNK ELECTRO_G 135.90 200.50 1 180 R101 Res_Zero_Ohm_0603 SY_JUNK res_0603 152.00 218.50 1 270 # # The Voltage set and trim components # for the BULK_3V3 regulator # R102 Res_1070_Ohm_0603 SY_JUNK res_0603_1sb 153.00 195.00 1 180 R103 Res_100_Ohm_Var SY_JUNK TRIM_POT_SM_43W 153.00 201.00 1 90 R104 Res_1k_Ohm_0603 SY_JUNK res_0603 157.00 201.00 1 270 C103 Cap_220_nFd_0603 SY_JUNK cap_0603 153.00 197.30 1 0 # # The Output Filter components # for the BULK_3V3 Linear Regulator. # C104 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 146.00 205.00 1 180 C105 Cap_330_uFd_Tant_V SY_JUNK Tant_V_Case 147.50 194.50 2 270 DZ101 MMSZ4686T1G SY_JUNK zener_sod123 143.00 194.50 2 270 # # BULK_2V5 Supply Components # # BULK_2V5 DCDC Linear Regulator 3 Amp # ---========-------------------------------- # # # Original Rev. 26-Feb-2018 # Most Recent Rev. 27-Mar-2018 # # # # This file holds all of the components involved with # BULK_2V5 Linear Regulator on the HTM Module. # # This is a 3 Amp LT1764 Linear Regulator for the BULK_2V5 bus. # # This is a non-relatively_positioned_component_set version of DCDC-4. # # The HTM has it own private version of the LT1764A geometry. # # # # Board_Location # Ref Part_Number Symbol Geometry X Y Properties #----- ----------- ------ ------------------ -------------- ---------- # U111 IC_Linear_LT1764A SY_JUNK LT1764A_HTM 82.00 211.00 1 270 # # Input Voltage Drop and High Frequency Noise Filter # C110 Cap_220_nFd_0603 SY_JUNK cap_0603 94.30 230.00 2 180 R115 Res_3R3_Ohm_2512 SY_JUNK res_2512 92.30 235.00 1 180 R116 Res_3R3_Ohm_2512 SY_JUNK res_2512 77.30 235.00 1 180 L111 Wurth_744311470 SY_JUNK Wurth_6969_Ind 74.50 220.00 1 270 # # Input Filter for BULK_2V5 # and its Enable Shut Down jumper # C111 Cap_220_nFd_0603 SY_JUNK cap_0603 77.50 211.80 1 90 C112 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 69.50 214.00 1 0 C116 Cap_22_uFd_Tant_V SY_JUNK Tant_V_Case 67.00 209.50 1 180 C117 Cap_330_uFd_25V SY_JUNK ELECTRO_G 65.90 200.50 1 180 R111 Res_Zero_Ohm_0603 SY_JUNK res_0603 82.00 218.50 1 270 # # The Voltage set and trim components # for the BULK_2V5 regulator # R112 Res_1070_Ohm_0603 SY_JUNK res_0603_1sb 83.00 195.00 1 180 R113 Res_100_Ohm_Var SY_JUNK TRIM_POT_SM_43W 83.00 201.00 1 90 R114 Res_1k_Ohm_0603 SY_JUNK res_0603 87.00 201.00 1 270 C113 Cap_220_nFd_0603 SY_JUNK cap_0603 83.00 197.30 1 0 # # The Output Filter components # for the BULK_2V5 Linear Regulator. # C114 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 76.00 205.00 1 180 C115 Cap_330_uFd_Tant_V SY_JUNK Tant_V_Case 77.50 194.50 2 270 DZ111 MMSZ4686T1G SY_JUNK zener_sod123 73.00 194.50 2 270 # # Distributed ByPass Capacitor Comps # # Key In Components File for the # HTM-0 ATLAS L1Calo HTM Card # ----=====---------------------------- # # Original Rev. 4-Feb-2018 # Most Recent Rev. 9-Apr-2018 # # # This file holds all of the "Distributed" bypass capacitors. # # These are the bypass capacitors that are placed # opportunistically during routing or that are placed # because during routing it looks like the circuit could # benefit from an additional bypass capacitor, e.g. for # symmetry of the layout. # # These bypass capacitors can be on any of the power nets. # # I'm specifically placing bypass capacitors near the # FPGA Mezzanine card connectors on both the ISO_12V # and the BULK_3V3 power nets. # # # # For the ISO_12V power net. # C99 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 171.00 151.00 2 0 C98 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 182.00 151.00 2 0 C97 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 165.50 170.00 2 0 C96 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 176.50 170.00 2 0 C95 Cap_220_nFd_0603 SY_JUNK cap_0603 165.50 151.00 2 0 C94 Cap_100_nFd_0603 SY_JUNK cap_0603 176.50 151.00 2 0 C93 Cap_220_nFd_0603 SY_JUNK cap_0603 171.00 170.00 2 0 C92 Cap_100_nFd_0603 SY_JUNK cap_0603 182.00 170.00 2 0 C91 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 109.50 238.00 1 0 C90 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 109.50 230.00 2 0 # # For the BULK_3V3 power net. # C89 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 33.00 189.50 2 180 C88 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 135.50 189.50 1 180 C87 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 35.00 34.00 2 0 C86 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 200.70 173.00 2 180 C85 Cap_220_nFd_0603 SY_JUNK cap_0603 220.00 46.00 2 270 C84 Cap_100_nFd_0603 SY_JUNK cap_0603 231.00 159.00 2 90 C83 Cap_220_nFd_0603 SY_JUNK cap_0603 200.00 170.00 2 180 C82 Cap_100_nFd_0603 SY_JUNK cap_0603 200.00 151.00 2 180 # # For the MEZZ_3V3 power net. # C80 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 204.00 136.50 2 90 C79 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 194.00 151.00 2 0 C78 Cap_220_nFd_0603 SY_JUNK cap_0603 188.00 151.00 2 0 C77 Cap_100_nFd_0603 SY_JUNK cap_0603 220.00 153.00 1 0 # # For the MEZZ_1V8 power net. # C76 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 143.00 100.00 2 0 C75 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 162.90 100.00 2 0 C74 Cap_220_nFd_0603 SY_JUNK cap_0603 153.00 100.00 2 0 C73 Cap_100_nFd_0603 SY_JUNK cap_0603 173.00 100.00 2 180 # # For the BULK_2V5 power net. # C69 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 67.50 113.00 2 180 C68 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 65.50 189.50 1 180 C67 Cap_220_nFd_0603 SY_JUNK cap_0603 63.50 96.00 2 270 C66 Cap_100_nFd_0603 SY_JUNK cap_0603 54.00 189.50 2 0 # # Clock Generation and Spare Crystal Oscillator Components # # HTM Module Key In Components File # ----------------------------------------------------------- # # # Original Rev. 3-Feb-2018 # Most Recent Rev. 21-Apr-2018 # # # 40.08 MHz Clock Generation # # # Receive the Hub #2 LHC Reference Clock Just for Monitoring # U251 IC_65LVDS2 SY_JUNK sot_23_5 24.00 145.00 1 90 R251 Res_49R9_Ohm_0603 SY_JUNK res_0603 29.50 143.00 1 0 R252 Res_49R9_Ohm_0603 SY_JUNK res_0603 29.50 147.00 1 0 R253 Res_4700_Ohm_0603 SY_JUNK res_0603 31.20 140.50 1 180 R254 Res_2740_Ohm_0603 SY_JUNK res_0603_1sb 31.20 149.50 1 180 R255 Res_110_Ohm_0603 SY_JUNK res_0603 17.50 145.00 1 180 R256 Res_110_Ohm_0603 SY_JUNK res_0603 24.00 152.00 1 0 C251 Cap_220_nFd_0603 SY_JUNK cap_0603 17.50 141.00 1 180 C252 Cap_100_nFd_0603 SY_JUNK cap_0603 29.50 138.00 1 180 ### the J15 LEMO Connector is in the Front Panel Comps file. # # Receive the Hub #1 LHC Reference Clock # U252 IC_65LVDS2 SY_JUNK sot_23_5 245.00 130.00 1 0 R261 Res_49R9_Ohm_0603 SY_JUNK res_0603 243.00 124.50 1 270 R262 Res_49R9_Ohm_0603 SY_JUNK res_0603 247.00 124.50 1 270 R263 Res_4700_Ohm_0603 SY_JUNK res_0603 240.50 122.80 1 90 R264 Res_2740_Ohm_0603 SY_JUNK res_0603_1sb 249.50 122.80 1 90 C253 Cap_220_nFd_0603 SY_JUNK cap_0603 239.50 132.50 1 180 C254 Cap_100_nFd_0603 SY_JUNK cap_0603 238.00 124.50 1 90 C277 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 256.50 135.00 2 90 # # 40.0787 MHz PLL # U253 IC_PLL_40M0787 SY_JUNK Connor_SFX 245.00 147.00 1 90 R265 Res_110_Ohm_0603 SY_JUNK res_0603 250.30 136.00 1 90 R268 Res_4700_Ohm_0603 SY_JUNK res_0603 238.50 137.00 1 180 R266 Res_49R9_Ohm_0603 SY_JUNK res_0603 247.00 159.00 1 0 R267 Res_49R9_Ohm_0603 SY_JUNK res_0603 247.00 157.00 1 0 C256 Cap_47_nFd_0603 SY_JUNK cap_0603 251.00 159.00 1 0 C257 Cap_47_nFd_0603 SY_JUNK cap_0603 251.00 157.00 1 0 C258 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 233.50 143.00 1 180 C259 Cap_220_nFd_0603 SY_JUNK cap_0603 244.40 144.40 2 180 C260 Cap_47_nFd_0603 SY_JUNK cap_0603 234.30 145.40 1 180 # # 40.0787 MHZ Clock Fanout # U254 IC_CDCLVD1204 SY_JUNK qfn_16_ti 245.00 170.00 1 90 R273 Res_1k_Ohm_0603 SY_JUNK res_0603 243.00 164.50 1 270 R274 Res_1k_Ohm_0603 SY_JUNK res_0603 245.10 164.50 1 270 R271 Res_49R9_Ohm_0603 SY_JUNK res_0603 254.00 169.00 2 180 R272 Res_49R9_Ohm_0603 SY_JUNK res_0603 254.00 171.00 2 180 C255 Cap_100_nFd_0603 SY_JUNK cap_0603 255.70 173.00 2 180 C261 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 236.00 177.50 2 0 C262 Cap_220_nFd_0603 SY_JUNK cap_0603 250.50 165.00 1 270 C263 Cap_47_nFd_0603 SY_JUNK cap_0603 248.50 165.00 1 270 # # Coupling 40.0787 MHz Fanout to SiLabs 5338 # R275 Res_110_Ohm_0603 SY_JUNK res_0603 237.00 165.50 1 0 C264 Cap_47_nFd_0603 SY_JUNK cap_0603 235.90 162.50 1 270 C265 Cap_47_nFd_0603 SY_JUNK cap_0603 238.00 162.50 1 270 # # Coupling 40.0787 MHz Fanout to FPGA Logic Clock Input # C266 Cap_47_nFd_0603 SY_JUNK cap_0603 235.00 171.50 1 180 C267 Cap_47_nFd_0603 SY_JUNK cap_0603 235.00 169.50 1 180 # # Front Panel Monitor of the HTM's 40.0787 MHz Clock # U255 IC_65LVDS2 SY_JUNK sot_23_5 24.00 130.00 1 90 R276 Res_110_Ohm_0603 SY_JUNK res_0603 28.50 130.00 1 90 R277 Res_110_Ohm_0603 SY_JUNK res_0603 17.50 130.00 1 180 C268 Cap_220_nFd_0603 SY_JUNK cap_0603 17.50 126.00 1 180 ### the J16 LEMO Connector is in the Front Panel Comps file. # # Spare LVDS Output Crystal Oscillator # U256 NOT_A_PART SY_JUNK LVDS_OSC 210.00 193.00 1 180 C271 Cap_47_nFd_0603 SY_JUNK cap_0603 207.70 185.00 1 270 C272 Cap_47_nFd_0603 SY_JUNK cap_0603 209.80 185.00 1 270 C269 Cap_100_nFd_0603 SY_JUNK cap_0603 217.00 190.90 1 180 C270 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 217.00 188.00 2 0 # # CLK_3V3 Power Filter # C275 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 242.40 202.50 1 0 L251 Wurth_744311470 SY_JUNK Wurth_6969_Ind 238.00 193.00 1 90 C276 Cap_220_nFd_0603 SY_JUNK cap_0603 241.70 183.50 1 0 # # CLK_2V5 Power Filter # C281 Cap_220_nFd_0603 SY_JUNK cap_0603 250.80 202.50 1 0 L281 Wurth_744311470 SY_JUNK Wurth_6969_Ind 250.00 193.00 1 90 C282 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 251.50 178.50 2 180 # # MiniPODs Rx and Tx Components # # Key In Components File for the HTM Module # -------------------------------------------- # # Original Rev. 3-Feb-2018 # Most Recent Rev. 29-Mar-2018 # # # This Comps file holds the Components for the # Receiver and Transmitter MiniPODs. # # # # # Receiver MiniPOD Components # # Rec_MP Conn_FCI_55714 SY_JUNK minipod_receiver 102.00 130.00 1 0 # # DC Blocking Capacitors for the 12 Channels from the Receiver MiniPOD # C25 Cap_100_nFd_0201 SY_JUNK cap_0201_top 95.50 141.30 1 90 C26 Cap_100_nFd_0201 SY_JUNK cap_0201_top 96.50 141.30 1 90 C30 Cap_100_nFd_0201 SY_JUNK cap_0201_top 98.90 141.30 1 90 C29 Cap_100_nFd_0201 SY_JUNK cap_0201_top 99.90 141.30 1 90 C33 Cap_100_nFd_0201 SY_JUNK cap_0201_top 102.30 141.30 1 90 C34 Cap_100_nFd_0201 SY_JUNK cap_0201_top 103.30 141.30 1 90 C37 Cap_100_nFd_0201 SY_JUNK cap_0201_top 105.70 141.30 1 90 C38 Cap_100_nFd_0201 SY_JUNK cap_0201_top 106.70 141.30 1 90 C41 Cap_100_nFd_0201 SY_JUNK cap_0201_top 114.90 135.60 1 00 C42 Cap_100_nFd_0201 SY_JUNK cap_0201_top 114.90 134.60 1 00 C45 Cap_100_nFd_0201 SY_JUNK cap_0201_top 114.90 132.20 1 00 C46 Cap_100_nFd_0201 SY_JUNK cap_0201_top 114.90 131.20 1 00 C47 Cap_100_nFd_0201 SY_JUNK cap_0201_top 114.90 128.80 1 00 C48 Cap_100_nFd_0201 SY_JUNK cap_0201_top 114.90 127.80 1 00 C44 Cap_100_nFd_0201 SY_JUNK cap_0201_top 114.90 125.40 1 00 C43 Cap_100_nFd_0201 SY_JUNK cap_0201_top 114.90 124.40 1 00 C27 Cap_100_nFd_0201 SY_JUNK cap_0201_top 95.50 118.70 1 270 C28 Cap_100_nFd_0201 SY_JUNK cap_0201_top 96.50 118.70 1 270 C32 Cap_100_nFd_0201 SY_JUNK cap_0201_top 98.90 118.70 1 270 C31 Cap_100_nFd_0201 SY_JUNK cap_0201_top 99.90 118.70 1 270 C36 Cap_100_nFd_0201 SY_JUNK cap_0201_top 102.30 118.70 1 270 C35 Cap_100_nFd_0201 SY_JUNK cap_0201_top 103.30 118.70 1 270 C39 Cap_100_nFd_0201 SY_JUNK cap_0201_top 105.70 118.70 1 270 C40 Cap_100_nFd_0201 SY_JUNK cap_0201_top 106.70 118.70 1 270 # # Rec_MP Power Filter Components # # # Rec_MP 2V5 Filter # C431 Cap_100_nFd_0603 SY_JUNK cap_0603 68.00 120.00 1 270 C432 Cap_220_nFd_0603 SY_JUNK cap_0603 66.00 126.00 2 270 C433 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 63.50 119.00 1 270 L431 Wurth_744311470 SY_JUNK Wurth_6969_Ind 74.00 123.00 1 0 C434 Cap_100_nFd_0603 SY_JUNK cap_0603 76.00 128.00 1 0 C435 Cap_220_nFd_0603 SY_JUNK cap_0603 116.00 120.50 2 90 C436 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 75.20 117.50 1 180 R431 Res_0.5_Ohm_0603 SY_JUNK res_0603 74.50 115.00 1 180 # # Rec_MP 3V3 Filter # C441 Cap_100_nFd_0603 SY_JUNK cap_0603 68.00 140.00 1 90 C442 Cap_220_nFd_0603 SY_JUNK cap_0603 66.00 134.00 2 90 C443 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 63.50 141.00 1 90 L441 Wurth_744311470 SY_JUNK Wurth_6969_Ind 74.00 137.00 1 0 C444 Cap_100_nFd_0603 SY_JUNK cap_0603 76.00 132.00 1 0 C445 Cap_220_nFd_0603 SY_JUNK cap_0603 116.00 139.50 2 270 C446 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 75.20 142.50 1 180 R441 Res_0.5_Ohm_0603 SY_JUNK res_0603 74.50 145.00 1 180 # # Rec_MP Pull-Up Resistor on serial bus lines, # reset, and interrupt signals to/from # the HTM's MiniPOD Receiver # R445 Res_4700_Ohm_0603 SY_JUNK res_0603 119.00 135.00 2 90 R446 Res_4700_Ohm_0603 SY_JUNK res_0603 121.00 135.00 2 90 R447 Res_4700_Ohm_0603 SY_JUNK res_0603 123.00 135.00 2 90 R448 Res_4700_Ohm_0603 SY_JUNK res_0603 125.00 135.00 2 90 ########################################### # # # Receive Above Transmit Below # # # ########################################### # # # Transmitter MiniPOD Components # ----------- # Trans_MP Conn_FCI_55714 SY_JUNK minipod_transmitter 102.00 96.00 1 0 # # Trans_MP Power Filter Components # # # Trans_MP 2V5 Filter # C411 Cap_100_nFd_0603 SY_JUNK cap_0603 68.00 86.00 1 270 C412 Cap_220_nFd_0603 SY_JUNK cap_0603 66.00 92.00 2 270 C413 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 63.50 85.00 1 270 L411 Wurth_744311470 SY_JUNK Wurth_6969_Ind 74.00 89.00 1 0 C414 Cap_100_nFd_0603 SY_JUNK cap_0603 76.00 94.00 1 0 C415 Cap_220_nFd_0603 SY_JUNK cap_0603 116.00 91.00 2 270 C416 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 75.20 83.50 1 180 R411 Res_0.5_Ohm_0603 SY_JUNK res_0603 74.50 81.00 1 180 # # Trans_MP 3V3 Filter # C421 Cap_100_nFd_0603 SY_JUNK cap_0603 68.00 106.00 1 90 C422 Cap_220_nFd_0603 SY_JUNK cap_0603 66.00 100.00 2 90 C423 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 63.50 107.00 1 90 L421 Wurth_744311470 SY_JUNK Wurth_6969_Ind 74.00 103.00 1 0 C424 Cap_100_nFd_0603 SY_JUNK cap_0603 76.00 98.00 1 0 C425 Cap_220_nFd_0603 SY_JUNK cap_0603 116.00 102.00 2 90 C426 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 75.20 108.50 1 180 R421 Res_0.5_Ohm_0603 SY_JUNK res_0603 74.50 111.00 1 180 # # Trans_MP Pull-Up Resistor on serial bus lines, # reset, and interrupt signals to/from # the HTM's MiniPOD Transmitter # R425 Res_4700_Ohm_0603 SY_JUNK res_0603 119.00 100.30 2 90 R426 Res_4700_Ohm_0603 SY_JUNK res_0603 121.00 100.30 2 90 R427 Res_4700_Ohm_0603 SY_JUNK res_0603 123.00 100.30 2 90 R428 Res_4700_Ohm_0603 SY_JUNK res_0603 125.00 100.30 2 90 # # FEX Data Coupling Capacitors and DVP Comps # # HTM Module Key In Components File # -------------------------------------- # # # Original Rev. 2-Feb-2018 # Most Recent Rev. 10-Apr-2018 # # # This file holds all of the DC Blocking Caps and # the Differential Via Pairs for the FEX Data output # signals from the FPGA to the J23 Backplane Connector. # # # Recall that each FEX Data Output to each Hub has 6 MGT Links. # # The HTM Card has a FEX Data Output to Hub #1 and Hub #2 # # thus 12 MGT Links in total # thus 24 DC Blocking Capacitors. # # # Board_Location # Ref Part_Number Symbol Geometry X Y Properties #----- ----------- ------ ------------------ -------------- ---------- # C1 Cap_100_nFd_0201 SY_JUNK cap_0201_top 225.00 114.00 1 180 C2 Cap_100_nFd_0201 SY_JUNK cap_0201_top 225.00 113.00 1 180 C3 Cap_100_nFd_0201 SY_JUNK cap_0201_top 231.00 111.00 1 180 C4 Cap_100_nFd_0201 SY_JUNK cap_0201_top 231.00 110.00 1 180 C5 Cap_100_nFd_0201 SY_JUNK cap_0201_top 225.00 108.00 1 180 C6 Cap_100_nFd_0201 SY_JUNK cap_0201_top 225.00 107.00 1 180 C7 Cap_100_nFd_0201 SY_JUNK cap_0201_top 231.00 105.00 1 180 C8 Cap_100_nFd_0201 SY_JUNK cap_0201_top 231.00 104.00 1 180 C9 Cap_100_nFd_0201 SY_JUNK cap_0201_top 225.00 102.00 1 180 C10 Cap_100_nFd_0201 SY_JUNK cap_0201_top 225.00 101.00 1 180 C11 Cap_100_nFd_0201 SY_JUNK cap_0201_top 231.00 99.00 1 180 C12 Cap_100_nFd_0201 SY_JUNK cap_0201_top 231.00 98.00 1 180 C13 Cap_100_nFd_0201 SY_JUNK cap_0201_top 225.00 96.00 1 180 C14 Cap_100_nFd_0201 SY_JUNK cap_0201_top 225.00 95.00 1 180 C15 Cap_100_nFd_0201 SY_JUNK cap_0201_top 231.00 93.00 1 180 C16 Cap_100_nFd_0201 SY_JUNK cap_0201_top 231.00 92.00 1 180 C17 Cap_100_nFd_0201 SY_JUNK cap_0201_top 220.00 84.00 1 180 C18 Cap_100_nFd_0201 SY_JUNK cap_0201_top 220.00 83.00 1 180 C19 Cap_100_nFd_0201 SY_JUNK cap_0201_top 226.00 81.00 1 180 C20 Cap_100_nFd_0201 SY_JUNK cap_0201_top 226.00 80.00 1 180 C21 Cap_100_nFd_0201 SY_JUNK cap_0201_top 220.00 78.00 1 180 C22 Cap_100_nFd_0201 SY_JUNK cap_0201_top 220.00 77.00 1 180 C23 Cap_100_nFd_0201 SY_JUNK cap_0201_top 226.00 75.00 1 180 C24 Cap_100_nFd_0201 SY_JUNK cap_0201_top 226.00 74.00 1 180 # # Differential Pair Vias to Escape Signals from the FPGA Perimeter # ------------------------------------------------------------------ # ##DPV1 NOT_A_PART SY_JUNK DIFF_PAIR_THRU 237.00 113.50 1 90 ##DPV3 NOT_A_PART SY_JUNK DIFF_PAIR_THRU 258.00 110.50 1 90 ##DPV5 NOT_A_PART SY_JUNK DIFF_PAIR_THRU 237.00 107.50 1 90 ##DPV7 NOT_A_PART SY_JUNK DIFF_PAIR_THRU 241.00 104.50 1 90 DPV9 NOT_A_PART SY_JUNK DIFF_PAIR_THRU 237.00 101.50 1 90 DPV11 NOT_A_PART SY_JUNK DIFF_PAIR_THRU 242.00 98.50 1 90 DPV13 NOT_A_PART SY_JUNK DIFF_PAIR_THRU 237.00 95.50 1 90 DPV15 NOT_A_PART SY_JUNK DIFF_PAIR_THRU 242.00 92.50 1 90 DPV17 NOT_A_PART SY_JUNK DIFF_PAIR_THRU 232.00 83.50 1 90 DPV19 NOT_A_PART SY_JUNK DIFF_PAIR_THRU 236.00 80.50 1 90 DPV21 NOT_A_PART SY_JUNK DIFF_PAIR_THRU 232.00 77.50 1 90 DPV23 NOT_A_PART SY_JUNK DIFF_PAIR_THRU 236.00 74.50 1 90 ###DPV702 NOT_A_PART SY_JUNK DIFF_PAIR_THRU_3P 185.20 93.10 1 135 ###DPV101 NOT_A_PART SY_JUNK DIFF_PAIR_THRU_3P_TOP_MID_RELIEF 102.00 115.50 1 90 ###DPV137 NOT_A_PART SY_JUNK DIFF_PAIR_THRU_3P_1MM1 33.40 169.80 1 270 ###DPV141 NOT_A_PART SY_JUNK DIFF_PAIR_THRU_1G 33.40 158.60 1 0 # # Monitor Connector J11 Components # # Key In Components File for the HTM Module # -------------------------------------------- # # Original Rev. 2-Mar-2018 # Most Recent Rev. 4-Apr-2018 # # # This Comps file holds the Components for the # Monitor Connector J11. # # This connector is on the surface of the HTM PCB. # # This connector provides access to monitor most # of the HTN's Power Supplies and access to the # JTAG connector for the CPLD on the FPGA Mezz card. # # # # Monitoring Connector J11 # J11 Header_2x20_2mm SY_JUNK Header_2x20_2mm 228.00 235.00 1 90 # # RC Filter and Safety Components Associated # with the J11 Power Supply Monitor Connector # ---------------------------------------------- # # These RC filters are for the Power Supply Voltage # Monitor Test Points in the J11 Connector at the North # East corner of the HTM card. The 110 Ohm Rs are # also a current limiter for safety. # C501 Cap_220_nFd_0603 SY_JUNK cap_0603 247.00 227.50 2 90 C502 Cap_220_nFd_0603 SY_JUNK cap_0603 245.00 227.50 2 90 C503 Cap_220_nFd_0603 SY_JUNK cap_0603 243.00 227.50 2 90 C504 Cap_220_nFd_0603 SY_JUNK cap_0603 241.00 227.50 2 90 C505 Cap_220_nFd_0603 SY_JUNK cap_0603 239.00 227.50 2 90 R501 Res_110_Ohm_0603 SY_JUNK res_0603 187.50 235.00 2 180 R502 Res_110_Ohm_0603 SY_JUNK res_0603 245.00 217.50 2 90 R503 Res_110_Ohm_0603 SY_JUNK res_0603 53.00 219.50 2 90 R504 Res_110_Ohm_0603 SY_JUNK res_0603 219.20 157.00 1 90 R505 Res_110_Ohm_0603 SY_JUNK res_0603 173.00 102.50 2 180 # # Hardware Address Components # # HTM-0 Key-In Components File # # # Original Rev. 9-Mar-2018 # Current Rev. 28-Mar-2018 # # # # # This nets files contains all of the components # on the HTM Card that are associated with the # ATCA Hardware Address signals. # # # # # Backplane Hardware Slot Address RC Filter Components # # # RC Filters for: ATCA Handle Switch, Hardware Address Lines # # R1559 and C1559 are the Handle Switch Filter # # R1551:R1558 and C1551:C1558 are Hardware Address Line Filters # R171 Res_1k_Ohm_0603 SY_JUNK res_0603 231.00 49.00 1 0 R172 Res_1k_Ohm_0603 SY_JUNK res_0603 212.00 49.00 1 0 R173 Res_1k_Ohm_0603 SY_JUNK res_0603 231.00 46.00 1 0 R174 Res_1k_Ohm_0603 SY_JUNK res_0603 212.00 46.00 1 0 R175 Res_1k_Ohm_0603 SY_JUNK res_0603 231.00 43.00 1 0 R176 Res_1k_Ohm_0603 SY_JUNK res_0603 212.00 43.00 1 0 R177 Res_1k_Ohm_0603 SY_JUNK res_0603 231.00 40.00 1 0 R178 Res_1k_Ohm_0603 SY_JUNK res_0603 212.00 40.00 1 0 C171 Cap_100_nFd_0603 SY_JUNK cap_0603 225.00 49.00 1 0 C172 Cap_100_nFd_0603 SY_JUNK cap_0603 206.00 49.00 1 0 C173 Cap_100_nFd_0603 SY_JUNK cap_0603 225.00 46.00 1 0 C174 Cap_100_nFd_0603 SY_JUNK cap_0603 206.00 46.00 1 0 C175 Cap_100_nFd_0603 SY_JUNK cap_0603 225.00 43.00 1 0 C176 Cap_100_nFd_0603 SY_JUNK cap_0603 206.00 43.00 1 0 C177 Cap_100_nFd_0603 SY_JUNK cap_0603 225.00 40.00 1 0 C178 Cap_100_nFd_0603 SY_JUNK cap_0603 206.00 40.00 1 0 # # HTM Life Boat Components # # Key In Components File for the HTM Module # -------------------------------------------- # # # Original Rev. 3-Apr-2018 # Most Recent Rev. 4-Apr-2018 # # # This file holds all of the Life Boat components. # # # Most of these components have reference Designators # in the range of ?? through ??. # # # Board_Location # Ref Part_Number Symbol Geometry X Y Properties #----- ----------- ------ ------------------ -------------- ---------- # # # Bulk_3V3 supply to J11 Pin 32 for the CPLD JTAG # R509 Res_33_Ohm_0603 SY_JUNK res_0603 240.00 217.50 1 90 # # Components associated with the following 8 Life Boat Signals: # # CPLD GPIO_3 WTERM21 Not_a_Part SY_JUNK Wrap_1mm1 198.50 212.00 1 0 R510 Not_a_Part SY_JUNK res_0603_1sb 196.50 214.00 1 90 R511 Not_a_Part SY_JUNK res_0603_1sb 196.50 210.00 1 270 # CPLD GPIO_4 WTERM22 Not_a_Part SY_JUNK Wrap_1mm1 203.50 212.00 1 0 R520 Not_a_Part SY_JUNK res_0603_1sb 201.50 214.00 2 90 R521 Not_a_Part SY_JUNK res_0603_1sb 201.50 210.00 2 270 # CPLD GPIO_5 WTERM23 Not_a_Part SY_JUNK Wrap_1mm1 208.50 212.00 1 0 R530 Not_a_Part SY_JUNK res_0603_1sb 206.50 214.00 1 90 R531 Not_a_Part SY_JUNK res_0603_1sb 206.50 210.00 1 270 # JTAGENB for the CPLD JTAG Connection WTERM24 Not_a_Part SY_JUNK Wrap_1mm1 213.50 212.00 1 0 R540 Not_a_Part SY_JUNK res_0603_1sb 211.50 214.00 2 90 R541 Not_a_Part SY_JUNK res_0603_1sb 211.50 210.00 2 270 # BOOTMODE WTERM25 Not_a_Part SY_JUNK Wrap_1mm1 218.50 212.00 1 0 R550 Not_a_Part SY_JUNK res_0603_1sb 216.50 214.00 1 90 R551 Not_a_Part SY_JUNK res_0603_1sb 216.50 210.00 1 270 # RESIN Reset Input WTERM26 Not_a_Part SY_JUNK Wrap_1mm1 223.50 212.00 1 0 R560 Not_a_Part SY_JUNK res_0603_1sb 221.50 214.00 2 90 R561 Not_a_Part SY_JUNK res_0603_1sb 221.50 210.00 2 270 # CONFIGX Configure_X WTERM27 Not_a_Part SY_JUNK Wrap_1mm1 228.50 212.00 1 0 R570 Not_a_Part SY_JUNK res_0603_1sb 226.50 214.00 1 90 R571 Not_a_Part SY_JUNK res_0603_1sb 226.50 210.00 1 270 # VBAT_IN Backup Battery Input for Realtime Clock and FPGA Key WTERM28 Not_a_Part SY_JUNK Wrap_1mm1 233.50 212.00 1 0 R580 Not_a_Part SY_JUNK res_0603_1sb 231.50 214.00 2 90 R581 Not_a_Part SY_JUNK res_0603_1sb 231.50 210.00 2 270 # # Now some Wire Terminals so that we have that # type of access to the FPGA Select I/O Life Boat # signals if needed. # WTERM31 Not_a_Part SY_JUNK Wrap_1mm1 223.00 241.00 1 0 WTERM32 Not_a_Part SY_JUNK Wrap_1mm1 219.00 241.00 1 0 WTERM33 Not_a_Part SY_JUNK Wrap_1mm1 215.00 241.00 1 0 WTERM34 Not_a_Part SY_JUNK Wrap_1mm1 211.00 241.00 1 0 # # Sundry HTM Comps # # HTM Module Key In Components File # -------------------------------------- # # # Original Rev. 2-Feb-2018 # Most Recent Rev. 12-Apr-2018 # # # This file holds all of the Sundry HTM components. # # # # Contents: # # - Perimeter Rivets # - High-Speed Rivets # - Scope Loops # - Iso_12V Shield Resistor # # # # Board_Location # Ref Part_Number Symbol Geometry X Y Properties #----- ----------- ------ ------------------ -------------- ---------- # # # Ground Rivets Used by High-Speed Signals and # around the perimeter of the board. # # # These rivets will not appear in the BOM file. # # Ground Rivets Along the Top Edge (aka North Edge) GR1 Not_a_Part SY_JUNK Rivet_Via_1mm1 43.00 310.00 1 0 GR2 Not_a_Part SY_JUNK Rivet_Via_1mm1 68.00 310.00 1 0 GR3 Not_a_Part SY_JUNK Rivet_Via_1mm1 93.00 310.00 1 0 GR4 Not_a_Part SY_JUNK Rivet_Via_1mm1 118.00 310.00 1 0 GR5 Not_a_Part SY_JUNK Rivet_Via_1mm1 143.00 310.00 1 0 GR6 Not_a_Part SY_JUNK Rivet_Via_1mm1 168.00 310.00 1 0 GR7 Not_a_Part SY_JUNK Rivet_Via_1mm1 193.00 310.00 1 0 GR8 Not_a_Part SY_JUNK Rivet_Via_1mm1 218.00 310.00 1 0 GR9 Not_a_Part SY_JUNK Rivet_Via_1mm1 243.00 310.00 1 0 # Ground Rivets by the J23 High-Speed MGT Signals GR10 Not_a_Part SY_JUNK Rivet_Via_1mm1 254.00 83.00 1 0 GR11 Not_a_Part SY_JUNK Rivet_Via_1mm1 249.30 81.00 1 0 GR12 Not_a_Part SY_JUNK Rivet_Via_1mm1 244.30 76.00 1 0 GR13 Not_a_Part SY_JUNK Rivet_Via_1mm1 239.30 71.00 1 0 GR14 Not_a_Part SY_JUNK Rivet_Via_1mm1 232.00 71.00 1 0 GR15 Not_a_Part SY_JUNK Rivet_Via_1mm1 226.00 71.00 1 0 GR16 Not_a_Part SY_JUNK Rivet_Via_1mm1 220.00 71.00 1 0 GR21 Not_a_Part SY_JUNK Rivet_Via_1mm1 220.00 117.00 1 0 GR22 Not_a_Part SY_JUNK Rivet_Via_1mm1 225.00 117.00 1 0 GR23 Not_a_Part SY_JUNK Rivet_Via_1mm1 233.00 117.00 1 0 GR24 Not_a_Part SY_JUNK Rivet_Via_1mm1 241.00 117.00 1 0 GR25 Not_a_Part SY_JUNK Rivet_Via_1mm1 248.50 117.00 1 0 GR26 Not_a_Part SY_JUNK Rivet_Via_1mm1 255.00 117.00 1 0 GR27 Not_a_Part SY_JUNK Rivet_Via_1mm1 261.00 117.00 1 0 GR28 Not_a_Part SY_JUNK Rivet_Via_1mm1 267.00 117.00 1 0 GR29 Not_a_Part SY_JUNK Rivet_Via_1mm1 272.00 114.00 1 0 GR30 Not_a_Part SY_JUNK Rivet_Via_1mm1 277.00 109.00 1 0 # Ground Rivets Under the MiniPOD Receiver High-Speed MGT Signals GR41 Not_a_Part SY_JUNK Rivet_Via_1mm1 115.00 105.50 1 0 GR42 Not_a_Part SY_JUNK Rivet_Via_1mm1 125.00 105.50 1 0 GR43 Not_a_Part SY_JUNK Rivet_Via_1mm1 135.00 105.50 1 0 GR44 Not_a_Part SY_JUNK Rivet_Via_1mm1 145.00 105.50 1 0 GR45 Not_a_Part SY_JUNK Rivet_Via_1mm1 155.00 105.50 1 0 GR46 Not_a_Part SY_JUNK Rivet_Via_1mm1 165.00 105.50 1 0 GR47 Not_a_Part SY_JUNK Rivet_Via_1mm1 175.00 105.50 1 0 GR48 Not_a_Part SY_JUNK Rivet_Via_1mm1 180.50 100.00 1 0 # Ground Rivets Over the MiniPOD Receiver High-Speed MGT Signals GR51 Not_a_Part SY_JUNK Rivet_Via_1mm1 96.00 149.00 1 0 GR52 Not_a_Part SY_JUNK Rivet_Via_1mm1 102.30 154.50 1 0 GR53 Not_a_Part SY_JUNK Rivet_Via_1mm1 111.30 154.50 1 0 GR54 Not_a_Part SY_JUNK Rivet_Via_1mm1 120.30 154.50 1 0 GR55 Not_a_Part SY_JUNK Rivet_Via_1mm1 129.00 146.00 1 0 GR56 Not_a_Part SY_JUNK Rivet_Via_1mm1 137.00 139.00 1 0 GR57 Not_a_Part SY_JUNK Rivet_Via_1mm1 147.00 139.00 1 0 GR58 Not_a_Part SY_JUNK Rivet_Via_1mm1 157.00 139.00 1 0 GR59 Not_a_Part SY_JUNK Rivet_Via_1mm1 167.00 139.00 1 0 GR60 Not_a_Part SY_JUNK Rivet_Via_1mm1 177.00 139.00 1 0 GR61 Not_a_Part SY_JUNK Rivet_Via_1mm1 187.00 132.50 1 0 GR62 Not_a_Part SY_JUNK Rivet_Via_1mm1 194.00 125.50 1 0 # Ground Rivets Under the MiniPOD Transmitter High-Speed MGT Signals GR71 Not_a_Part SY_JUNK Rivet_Via_1mm1 83.00 76.00 1 0 GR72 Not_a_Part SY_JUNK Rivet_Via_1mm1 90.00 70.30 1 0 GR73 Not_a_Part SY_JUNK Rivet_Via_1mm1 100.00 70.30 1 0 GR74 Not_a_Part SY_JUNK Rivet_Via_1mm1 110.00 70.30 1 0 GR75 Not_a_Part SY_JUNK Rivet_Via_1mm1 120.00 70.30 1 0 GR76 Not_a_Part SY_JUNK Rivet_Via_1mm1 130.00 70.30 1 0 GR77 Not_a_Part SY_JUNK Rivet_Via_1mm1 140.00 70.30 1 0 GR78 Not_a_Part SY_JUNK Rivet_Via_1mm1 150.00 70.30 1 0 GR79 Not_a_Part SY_JUNK Rivet_Via_1mm1 160.00 70.30 1 0 GR80 Not_a_Part SY_JUNK Rivet_Via_1mm1 170.00 70.30 1 0 GR81 Not_a_Part SY_JUNK Rivet_Via_1mm1 180.00 70.30 1 0 GR82 Not_a_Part SY_JUNK Rivet_Via_1mm1 190.00 70.30 1 0 GR83 Not_a_Part SY_JUNK Rivet_Via_1mm1 196.80 74.50 1 0 # Ground Rivets Under the long Ethernet Signals from the Backplane GR91 Not_a_Part SY_JUNK Rivet_Via_1mm1 55.00 53.50 1 0 GR92 Not_a_Part SY_JUNK Rivet_Via_1mm1 65.00 53.50 1 0 GR93 Not_a_Part SY_JUNK Rivet_Via_1mm1 75.00 53.50 1 0 GR94 Not_a_Part SY_JUNK Rivet_Via_1mm1 85.00 53.50 1 0 GR95 Not_a_Part SY_JUNK Rivet_Via_1mm1 95.00 53.50 1 0 GR96 Not_a_Part SY_JUNK Rivet_Via_1mm1 105.00 53.50 1 0 GR97 Not_a_Part SY_JUNK Rivet_Via_1mm1 115.00 53.50 1 0 GR98 Not_a_Part SY_JUNK Rivet_Via_1mm1 125.00 53.50 1 0 GR99 Not_a_Part SY_JUNK Rivet_Via_1mm1 135.00 53.50 1 0 GR100 Not_a_Part SY_JUNK Rivet_Via_1mm1 145.00 53.50 1 0 GR101 Not_a_Part SY_JUNK Rivet_Via_1mm1 155.00 53.50 1 0 GR102 Not_a_Part SY_JUNK Rivet_Via_1mm1 165.00 53.50 1 0 GR103 Not_a_Part SY_JUNK Rivet_Via_1mm1 175.00 53.50 1 0 GR104 Not_a_Part SY_JUNK Rivet_Via_1mm1 185.00 53.50 1 0 GR105 Not_a_Part SY_JUNK Rivet_Via_1mm1 194.50 53.50 1 0 # Ground Rivets along the bottom edge of the card GR111 Not_a_Part SY_JUNK Rivet_Via_1mm1 34.00 14.00 1 0 GR112 Not_a_Part SY_JUNK Rivet_Via_1mm1 44.00 14.00 1 0 GR113 Not_a_Part SY_JUNK Rivet_Via_1mm1 54.00 14.00 1 0 GR114 Not_a_Part SY_JUNK Rivet_Via_1mm1 64.00 14.00 1 0 GR115 Not_a_Part SY_JUNK Rivet_Via_1mm1 179.00 9.00 1 0 GR116 Not_a_Part SY_JUNK Rivet_Via_1mm1 189.00 9.00 1 0 GR117 Not_a_Part SY_JUNK Rivet_Via_1mm1 199.00 9.00 1 0 # Ground Rivets along the backplane edge of the card GR121 Not_a_Part SY_JUNK Rivet_Via_1mm1 271.00 175.00 1 0 GR122 Not_a_Part SY_JUNK Rivet_Via_1mm1 271.00 165.00 1 0 GR123 Not_a_Part SY_JUNK Rivet_Via_1mm1 271.00 155.00 1 0 GR124 Not_a_Part SY_JUNK Rivet_Via_1mm1 271.00 145.00 1 0 GR125 Not_a_Part SY_JUNK Rivet_Via_1mm1 271.00 135.00 1 0 GR126 Not_a_Part SY_JUNK Rivet_Via_1mm1 271.00 125.00 1 0 # Scope Probe Ground Loops WTERM1 Not_a_Part SY_JUNK Wrap_3mm0 245.00 60.00 1 0 WTERM2 Not_a_Part SY_JUNK Wrap_3mm0 265.00 60.00 1 0 WTERM3 Not_a_Part SY_JUNK Wrap_3mm0 58.00 130.00 1 0 WTERM4 Not_a_Part SY_JUNK Wrap_3mm0 58.00 96.00 1 0 # Shield Fill Resistor for the Iso_12V Power Supply R961 Res_110_Ohm_0603 SY_JUNK res_0603 140.50 49.00 1 0