# # HTM ATCA Comps # # Key In Components File for the # HTM-0 ATLAS L1Calo HTM Module # ---=====----------------------------- # # Original Rev. 1-Feb-2018 # Most Recent Rev. 28-Mar-2018 # # # This file holds all of the ATCA components on the # HTM card. This includes the ATCA power supply # components and all other comps directly related to ATCA. # # # # # Board_Location # Ref Part_Number Symbol Geometry X Y Properties #----- ----------- ------ ------------------ -------------- ---------- # # # ATCA Power Components # F1 Fuse_SMD_3A SY_JUNK Fuse_SMD 210.00 20.10 1 0 F2 Fuse_SMD_3A SY_JUNK Fuse_SMD 210.00 12.00 1 0 F3 Fuse_SMD_3A SY_JUNK Fuse_SMD 230.00 20.10 1 0 F4 Fuse_SMD_3A SY_JUNK Fuse_SMD 230.00 12.00 1 0 R951 Res_100_Ohm_2010 SY_JUNK res_2512 231.60 12.00 2 180 R952 Res_100_Ohm_2010 SY_JUNK res_2512 231.60 20.10 2 180 L1 Wurth_74466340007 SY_JUNK Wurth_Com_Mode_Ind 185.0 28.0 1 0 # # Input Capacitors for the Isolated +12V Supply # C951 Not_A_Part SY_JUNK res_1206_1sb 177.00 17.00 1 180 C952 Not_A_Part SY_JUNK res_1206_1sb 177.00 39.00 1 180 C954 Cap_68_uFd_100V SY_JUNK ELECTRO_H 146.00 28.00 1 90 C955 Cap_68_uFd_100V SY_JUNK ELECTRO_H 162.00 28.00 1 90 # # +12 Volt Isolated Power Module # Power_12V SynQor_PQ60120 SY_JUNK ATCA_Power_12V 106.50 28.00 1 0 # # Output Capacitors for the Isolated +12V Supply # C957 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 73.80 28.10 2 270 C958 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 77.10 28.10 2 270 C959 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 85.60 28.10 2 270 C960 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 88.90 28.10 2 270 C961 Cap_22_uFd_Tant_V SY_JUNK Tant_V_Case 93.40 28.10 2 90 C962 Cap_22_uFd_Tant_V SY_JUNK Tant_V_Case 98.70 28.10 2 90 C963 Cap_330_uFd_25V SY_JUNK ELECTRO_G 56.00 28.10 1 90 C964 Cap_330_uFd_25V SY_JUNK ELECTRO_G 68.00 28.10 1 90 # # AKA "component" for the Remote Sense Ground Connection # and for the Remote Sense on the Positive output terminal # of the Isolated +12V Supply # AKA1 Not_a_Part SY_JUNK AKA_1MM20 73.00 42.00 1 0 AKA2 Not_a_Part SY_JUNK AKA_1MM20 73.00 14.00 1 0 # # The ATCA ESD Strip on the Bottom Edge of Side 1 # # and the Silkscreen KEEP-OUT area boarders and labels, # and the mounting screw hole (and component pin) for # the Lower Handle on the front of the card. # # This is placed as TWO Geometries: # # ESD_Strip_Mid_Back SMD Component Pins 2 and 1 ESD_STRIP_MB # ESD_Strip_Front_Only THD Component Pin 3 ESD_STRIP_FO # ESD_STRIP_MB NOT_A_PART SY_JUNK ESD_Strip_Mid_Back 0.00 0.00 1 0 ESD_STRIP_FO NOT_A_PART SY_JUNK ESD_Strip_Front_Only 0.00 0.00 1 0 # # ATCA ESD Strip Resistors and Optional Grounds Connecting Jumper/Resistor # R957 Res_1_Meg_Ohm_1206 SY_JUNK res_1206 146.00 10.00 2 90 R958 Res_1_Meg_Ohm_1206 SY_JUNK res_1206 162.00 10.00 2 90 R959 Res_1_Meg_Ohm_1206 SY_JUNK res_1206 23.00 10.00 2 90 # # WTerm Vias for the wire connections to the Front Panel On/Off Switch # WTERM11 Not_a_Part SY_JUNK Wrap_1mm1 60.00 50.00 1 0 WTERM12 Not_a_Part SY_JUNK Wrap_1mm1 60.00 45.00 1 0