# # FPGA Mezzanine on the HTM Component # # Key In Components File for the # HTM-0 ATLAS L1Calo HTM Module # ----------------------------------------- # # Original Rev. 1-Feb-2018 # Most Recent Rev. 1-Feb-2018 # # # This file holds all of the FPGA Mezzanine that is # mounted or shown on the HTM Module. # # This file is setup as a Relatively Positioned Component Set, # i.e. the Center is at 0,0 and then everything in here has # the exact dimentions of the FPGA Mezzanine Card itself. # # This Relatively Positioned Component Set is then moved as # a whole to its final position on the HTM Module PCB. # # This Relatively Positioned Component Set consists of: # # 3 Samtec 160 pin ASP connectors J1, J2, J3 and # the FPGA Silkscreen component # # Note that the FPGA Mezzanine Silkscreen component holds the # real mounting holes in the HTM for the FPGA Mezzanine card. # # # # Board_Location # Ref Part_Number Symbol Geometry X Y Properties #----- ----------- ------ ------------------ -------------- ---------- # # # The FPGA Mezzane Center is: X = 0.0 mm Y = 0.0 mm # # # Place the silkscrren outlint of the ROD mezzanine. # # We pickup the Drill Holes for the standoffs to # mount the FPGA Mezz and HTM together from the # FPGA_Silk component. In this way these screw holes # move around whenever this Relatively Positioned # Component Set is moved. # FPGA_Mezz Not_a_Part SY_JUNK FPGA_Silk 0.00 0.00 1 0 # # Now the 3 Samtec 160 pin (172 pin) ASP connectors. # # These are real components on the HTM card pcb. # J3 Samtec_ASP-122953-01 SY_JUNK Samtec_ASP_160 35.56 0.00 1 90 J2 Samtec_ASP-122953-01 SY_JUNK Samtec_ASP_160 0.00 35.56 1 0 J1 Samtec_ASP-122953-01 SY_JUNK Samtec_ASP_160 0.00 -35.56 1 180