//
//  file:  electro_h_cap_geom.txt
//
//  Orig:   1-Apr-2015   original setup for Hub Module
//
//
//
//  Geometry for case size "H" aluminum electrolytic capacitor
//
//  Panasonic  FK  series low ESR aluminum electrolytic capacitor
//  for the Hub Module design.
//
//    47 uFd  100 Volt  Case "H13"  105 deg C.  Panasonic No.  EEE-FK2A470AQ
//
//
//  And lots of other Panasonic electrolytic capacitors.
//
//



$abort_enable = @false;
$$lock_windows(@on) ;
$$snap_diagonal(@off) ;
$$snap_orthogonal(@off) ;



//----------------------------------------------------------------------------

$$create_pin("ELECTRO_H_PAD", @replace);

$$page(0.0,0.0,0.0, @mm, 0.0, 0.0, [0.0, 0.0, 'PI$ELECTRO_H_PAD']);

$$point_mode(@vertex);

$$polygon( "PAD", ,         [ 2.85, 1.00,    2.85, -1.00,    -2.85,  -1.00,    -2.85, 1.00 ]);

$$polygon( "SOLDER_MASK", , [ 2.90, 1.05,    2.90, -1.05,    -2.90,  -1.05,    -2.90, 1.05 ]);

$$polygon( "PASTE_MASK", ,  [ 2.85, 1.00,    2.85, -1.00,    -2.85,  -1.00,    -2.85, 1.00 ]);

$$attribute( "TERMINAL_SURFACE_DEFINITION", "");

//----------------------------------------------------------------------------



$$create_component("ELECTRO_H", @replace);

$$page(0.0,0.0,0.0, @mm, 0.0, 0.0, [0.0, 0.0, 'CO$ELECTRO_H']);

$$point_mode(@vertex);

$$attribute( "COMPONENT_LAYOUT_TYPE", "surface");

$$attribute( "COMPONENT_LAYOUT_SURFACE", "both");

$$attribute( "COMPONENT_HEIGHT", "10.20", , @scale , , [0.0, 0.0] );


//
//  Component Placement Outline for the  ELECTRO_H
//

$$initial([  -6.75,  -6.75 ], , @nosnap );
$$terminal([ -6.75,   6.75 ] );
$$terminal([  6.75,   6.75 ] );
$$terminal([  6.75,  -6.75 ] );

$$attribute( "COMPONENT_PLACEMENT_OUTLINE", "", @mark, @scale );



//
//   Silkscreen
//

$$path( "SILKSCREEN", 0.20 , , [ -4.50,  6.80,    6.80,  6.80 ]);
$$path( "SILKSCREEN", 0.20 , , [ -4.50, -6.80,    6.80, -6.80 ]);

$$path( "SILKSCREEN", 0.20 , , [  6.80,  6.80,    6.80,  1.40 ]);
$$path( "SILKSCREEN", 0.20 , , [  6.80, -1.40,    6.80, -6.80 ]);

$$path( "SILKSCREEN", 0.20 , , [ -4.50,  6.80,   -6.80,  4.50 ]);
$$path( "SILKSCREEN", 0.20 , , [ -4.50, -6.80,   -6.80, -4.50 ]);


$$path( "SILKSCREEN", 0.20 , , [ -6.80,  4.50,   -6.80,  1.40 ]);
$$path( "SILKSCREEN", 0.20 , , [ -6.70,  4.60,   -6.70,  1.40 ]);
$$path( "SILKSCREEN", 0.20 , , [ -6.60,  4.70,   -6.60,  1.40 ]);
$$path( "SILKSCREEN", 0.20 , , [ -6.50,  4.80,   -6.50,  1.40 ]);
$$path( "SILKSCREEN", 0.20 , , [ -6.40,  4.90,   -6.40,  1.40 ]);
$$path( "SILKSCREEN", 0.20 , , [ -6.30,  5.00,   -6.30,  1.40 ]);
$$path( "SILKSCREEN", 0.20 , , [ -6.20,  5.10,   -6.20,  1.40 ]);

$$path( "SILKSCREEN", 0.20 , , [ -6.80,  1.40,   -6.20,  1.40 ]);


$$path( "SILKSCREEN", 0.20 , , [ -6.80, -4.50,   -6.80, -1.40 ]);
$$path( "SILKSCREEN", 0.20 , , [ -6.70, -4.60,   -6.70, -1.40 ]);
$$path( "SILKSCREEN", 0.20 , , [ -6.60, -4.70,   -6.60, -1.40 ]);
$$path( "SILKSCREEN", 0.20 , , [ -6.50, -4.80,   -6.50, -1.40 ]);
$$path( "SILKSCREEN", 0.20 , , [ -6.40, -4.90,   -6.40, -1.40 ]);
$$path( "SILKSCREEN", 0.20 , , [ -6.30, -5.00,   -6.30, -1.40 ]);
$$path( "SILKSCREEN", 0.20 , , [ -6.20, -5.10,   -6.20, -1.40 ]);

$$path( "SILKSCREEN", 0.20 , , [ -6.80, -1.40,   -6.20, -1.40 ]);


$$path( "SILKSCREEN", 0.20 , , [ -8.10,  7.00,   -5.90,  7.00 ]);
$$path( "SILKSCREEN", 0.20 , , [ -7.00,  8.10,   -7.00,  5.90 ]);

//
//   End of Silkscreen
//



$$text( "SILKSCREEN", "^$ref", 0.0, -9.2, 1.5, @BC, 0, 0.7, 0.20, "std", "None", 0.0, 0.0 );



//  Define the two pins on the  ELECTRO_H:
//
//    pin #1 the positive terminal is to the left,  pin #2 to the right
//    the axis is horizontal


$$attribute( "COMPONENT_PIN_DEFINITION",    "1", , @scale , , [ -4.85,  0.00 ]);
$$attribute( "COMPONENT_PADSTACK_OVERRIDE", "1, ELECTRO_H_PAD");

$$attribute( "COMPONENT_PIN_DEFINITION",    "2", , @scale , , [  4.85,  0.00 ]);
$$attribute( "COMPONENT_PADSTACK_OVERRIDE", "2, ELECTRO_H_PAD");