#
#            This is the  Key In  Net List  file for the
#
#                  HTM Module    Power Entry Nets
#          ------------------------------------------------
#
#
#                                                 Original Rev.   2-Feb-2018
#                                              Most Recent Rev.  23-Mar-2018
#



#
#   ATCA Power Entry Nets:
#


#
#   Shelf Ground
#

NET  'SHELF_GND'      P10-25


#
#   LOGIC Ground
#

NET  'GROUND'         P10-26





#
#   -48V Entry   A & B Buses
#

NET  'A_BUS_N48V_BP'        P10-33   F4-2
NET  'Card_BUS_N48V'                 F4-1      L1-1

NET  'A_BUS_EARLY_48_BP'    P10-30   R951-1
NET  'A_BUS_N48V_BP'                 R951-2


NET  'B_BUS_N48V_BP'        P10-34   F3-2
NET  'Card_BUS_N48V'                 F3-1

NET  'B_BUS_EARLY_48_BP'    P10-31   R952-1
NET  'B_BUS_N48V_BP'                 R952-2




#
#   Power Returns   A & B Buses
#

NET  'A_BUS_48V_RETURN_BP'      P10-28   F2-2
NET  'Card_48V_BUS_RETURN'               F2-1      L1-4

NET  'B_BUS_48V_RETURN_BP'      P10-29   F1-2
NET  'Card_48V_BUS_RETURN'               F1-1





#
#  ATCA "Entered" 48V Power to the 12V Converter
#

NET  'ENTERED_N48V'            L1-2

NET  'ENTERED_48V_RTN'         L1-3


NET  'ENTERED_N48V'       C954-2   C955-2   C952-2

NET  'ENTERED_48V_RTN'    C954-1   C955-1   C951-2


NET  'ENTERED_N48V'         Power_12V-3

NET  'ENTERED_48V_RTN'      Power_12V-1


NET  'SHELF_GND'          C951-1   C952-1





#
#   Pay Load Enable Signal  to the Isolated +12V Converter
#

NET  'ENABLE_ISO_12V_B'    Power_12V-2     WTERM12-1
NET  'ENTERED_N48V'                        WTERM11-1





#
#   Isolated +12V Power from the Converter
#

NET  'Iso_12V'             Power_12V-8

NET  'GROUND'              Power_12V-4





#
#   Remote Sense Feedback Connections:
#
#     The Remote Sense for both the Positive and Negative sides
#     of of the  Iso_12V  output must be isolated from the Fills
#     and Ground Planes that are directly under these pins.
#
#     I provide this isolation by giving the Remote Sense pins
#     a unique net name and then connecting these unique remote
#     sense nets to the  Iso_12V  and  Ground  nets by using an
#     "aka" component,  i.e. straight through at the same width
#     as the trace on a Breakout layer.
#
#   In this section also give the "Trim" pin on the Iso_12V
#   supply a net name.
#

NET  'REMOTE_SENSE_GND_ISO_12V'    Power_12V-5   AKA1-2

NET  'GROUND'                                    AKA1-1


NET  'No_Conn_Trim_12V'            Power_12V-6


NET  'REMOTE_SENSE_POS_ISO_12V'    Power_12V-7   AKA2-2

NET  'Iso_12V'                                   AKA2-1





#
#   Filter the Isolated +12V Power from the Converter
#

NET  'Iso_12V'      C957-2   C958-2   C959-2   C960-2
NET  'Iso_12V'      C961-1   C962-1   C963-1   C964-1

NET  'GROUND'       C957-1   C958-1   C959-1   C960-1
NET  'GROUND'       C961-2   C962-2   C963-2   C964-2





#
#   No Connection Pins  on the  P10 Zone 1 Connector
#

NET  'No_Conn_P10_Pin_13'   P10-13
NET  'No_Conn_P10_Pin_14'   P10-14
NET  'No_Conn_P10_Pin_15'   P10-15
NET  'No_Conn_P10_Pin_16'   P10-16

NET  'No_Conn_P10_Pin_27'   P10-27
NET  'No_Conn_P10_Pin_32'   P10-32