##### Boot of the 6 Slot Comtel Shelf ***** U-Boot 1.1.4 (Mar 13 2012 - 01:44:27) CPU: Au1550 324 MHz, id: 0x02, rev: 0x00 Board: ShMM-500 S/N: 08058066 DRAM: (ISSI IS42S32160A) 128 MB Flash: 64 MB In: serial Out: serial Err: serial ADM1060: configuration version 1.6 Net: Au1X00 ETHERNET Hit any key to stop autoboot: 3 2 1 0 ## Booting image at be080000 ... Image Name: MIPS Linux-2.4.26 Created: 2012-03-13 8:44:24 UTC Image Type: MIPS Linux Kernel Image (gzip compressed) Data Size: 879448 Bytes = 858.8 kB Load Address: 80100000 Entry Point: 802d4040 Verifying Checksum ... OK Uncompressing Kernel Image ... OK ## Loading Ramdisk Image at be440000 ... Image Name: Comtel RFS 2.8.2 Created: 2012-08-31 12:38:16 UTC Image Type: MIPS Linux RAMDisk Image (gzip compressed) Data Size: 3920535 Bytes = 3.7 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Starting kernel ... init started: BusyBox v1.16.2 (2012-03-13 01:40:31 PDT) /etc/rc: Mounting filesystems... /etc/rc: Mounted /proc /etc/rc: Mounted /dev/pts /etc/rc: Mounted /dev/mtdblock10 to /var/upgrade /etc/rc: Mounted /tmp /etc/rc: Checking the reliable upgrade watchdog timer...inactive /etc/rc: Mounted /dev/mtdblock0 to /var /etc/rc: Placed /var/tmp to ram disk /etc/rc: Setting hostname Comtel_HS /etc/rc: Started syslogd and klogd /etc/rc: Mounted /dev/mtdblock1 to /etc /etc/rc: Calling /etc/rc.comtel-6 /etc/readhwaddr: Board Hardware Address: 0x10 /etc/netconfig: /etc/hosts has valid Comtel_HS 192.168.0.22 entry /etc/netconfig: Updating /etc/profile.sentry with IP settings /etc/netconfig: Starting /bin/inetd... /etc/netconfig: Starting time synchronization script /etc/rc.comtel-6: Updating /etc/profile.sentry with specific settings /etc/rc.comtel-6: Starting snmpd... /etc/rc.comtel-6: Starting httpd... /etc/rc.comtel-6: Starting Shelf Manager ... for carrier type COMTEL6 /etc/rc.comtel-6: Command line: shelfman <*> 18:58:19.141 [90] Pigeon Point Shelf Manager ver. 2.8.2. Built on Mar 13 2012 01:35:09 <*> 18:58:19.152 [90] *** Lock log print buffer at 0x1006e3e0 *** <*> 18:58:19.153 [90] *** Pthread lock log print buffer at 0x10072c30 *** 18:58:19.164 [90] Reading configuration file: /etc/shelfman.conf Comtel_HS login: root Password: # # # date Wed Aug 16 18:58:31 UTC 2017 # # # clia fans Pigeon Point Shelf Manager Command Line Interpreter c8: FRU # 0 Current Level: 55 Minimum Speed Level: 20, Maximum Speed Level: 100 Dynamic minimum fan level: 55 c8: FRU # 1 Current Level: 55 Minimum Speed Level: 20, Maximum Speed Level: 100 Dynamic minimum fan level: 55 c8: FRU # 2 Current Level: 55 Minimum Speed Level: 20, Maximum Speed Level: 100 Dynamic minimum fan level: 55 c8: FRU # 3 Current Level: 55 Minimum Speed Level: 20, Maximum Speed Level: 100 Dynamic minimum fan level: 55 ca: FRU # 0 Current Level: 55 Minimum Speed Level: 20, Maximum Speed Level: 100 Dynamic minimum fan level: 55 ca: FRU # 1 Current Level: 55 Minimum Speed Level: 20, Maximum Speed Level: 100 Dynamic minimum fan level: 55 ca: FRU # 2 Current Level: 55 Minimum Speed Level: 20, Maximum Speed Level: 100 Dynamic minimum fan level: 55 ca: FRU # 3 Current Level: 55 Minimum Speed Level: 20, Maximum Speed Level: 100 Dynamic minimum fan level: 55 # # ##### Boot of the 14 Slot Asis Shelf ***** U-Boot 2009.08 (May 29 2015 - 10:10:52) Freescale i.MX28 family CPU: 297 MHz BUS: 99 MHz EMI: 130 MHz GPMI: 24 MHz I2C: ready DRAM: 128 MB SFGEN: S25FL512S detected, total size 64 MB A2F: SPICOMM protocol v1.7, M3 firmware v1.5, FPGA design v1.0.1.0 A2F: A2F firmware, version 1.5 A2F: Device type: A2F060M3E-FG256 A2F: MSS clock frequency: 40 MHz A2F: Fabric clock frequency: 20 MHz A2F: Fast delay calibration: 1330 cycles per 100uS A2F: eNVM: 128 KB (00000000 - 00020000) A2F: eSRAM: 16 KB (20000000 - 20004000) A2F: Extram start: 20002750 A2F: Last reset cause: PWRUP A2F: VMON flags: 00000000 RUPG: booting from image 1 (confirmed) In: serial Out: serial Err: serial Net: FEC0: 00:18:49:04:1e:9e, FEC1: 00:18:49:04:1e:9f FEC0, FEC1 Hit any key to stop autoboot: 3 2 1 0 RUPG: upgrade file is not present, skipping Loading file 'uImage.1' to addr 0x42000000 with size 1494660 (0x0016ce84)... Loaded from UBIFS cache Loading file 'rfs.1' to addr 0x46000000 with size 2577133 (0x002752ed)... Loaded from UBIFS cache ## Booting kernel from Legacy Image at 42000000 ... Image Name: Linux-2.6.34.8-shmm700 Created: 2014-05-29 23:33:07 UTC Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1494596 Bytes = 1.4 MB Load Address: 40008000 Entry Point: 40008000 Verifying Checksum ... OK ## Loading init Ramdisk from Legacy Image at 46000000 ... Image Name: modified RFS image Created: 2014-12-04 7:16:59 UTC Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 2577069 Bytes = 2.5 MB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... init started: BusyBox v1.19.4 (2014-05-29 16:26:09 PDT) /etc/rc: Current image set is 1 /etc/rc: Mounting filesystems... /etc/rc: Mounted /proc /etc/rc: Mounted /dev/pts /etc/rc: Mounted /tmp /etc/rc: Mounted /sys /etc/rc: Checking the reliable upgrade watchdog timer...inactive /etc/rc: Attaching ubi0:user...done /etc/rc: Mounting ubi0:user...done /etc/rc: Attaching ubi1:boot...done /etc/rc: Mounting ubi0:boot...done /etc/rc: Extracting application package /1/sentry.shmm700.app...done /etc/rc: Mounted /1/var to /var /etc/rc: Mounted /1/etc to /etc /etc/rc: Setting timezone to UTC /etc/rc: Placed /var/tmp to ram disk /etc/rc: Setting hostname shmm700 /etc/rc: Started syslogd and klogd /etc/rc: Calling /etc/rc.148257-00 /etc/readhwaddr: Board Hardware Address: 0x12 /etc/netconfig: /etc/hosts has valid shmm700 192.168.0.3 entry /etc/netconfig: Updating /etc/profile.sentry with IP settings /etc/netconfig: Starting /bin/inetd... /etc/netconfig: Starting time synchronization script /etc/rc.148257-00: Updating /etc/profile.sentry with specific settings /etc/rc.148257-00: Starting snmpd... /etc/rc.148257-00: Starting httpd... /etc/rc.148257-00: Starting shelfman... for carrier type ASIS /etc/rc.148257-00: Command line: shelfman <*> 19:18:08.115 [127] Pigeon Point Shelf Manager ver. 3.4.0. Built on May 29 2014 16:16:43 <*> 19:18:08.154 [127] *** Lock log print buffer at 0x1ccb44 *** <*> 19:18:08.155 [127] *** Pthread lock log print buffer at 0x1d1364 *** 19:18:08.182 [127] Read OTP bits 0x04041E9E, status=0 19:18:08.189 [127] Reading configuration file: /etc/shelfman.conf shmm700 login: root Password: # # # date Wed Aug 16 19:18:41 UTC 2017 # # # clia fans Pigeon Point Shelf Manager Command Line Interpreter 20: FRU # 9 Current Level: 6 Minimum Speed Level: 3, Maximum Speed Level: 15 Dynamic minimum fan level: 6 20: FRU # 8 Current Level: 6 Minimum Speed Level: 3, Maximum Speed Level: 15 Dynamic minimum fan level: 6 20: FRU # 7 Current Level: 6 Minimum Speed Level: 3, Maximum Speed Level: 15 Dynamic minimum fan level: 6 # #