Hub Module Bill of Material Inventory Status -------------------------------------------------- Revision: 2-Aug-2016 The first large section of this file is the electrical components in the Hub Module "Parts Kit" that goes to the Assembly House. The second smaller section of this file is the components, both electrical and mechanical. that are needed at MSU for the "Final Assembly" of the Hub Module. Some of the mechanical components in this list for Final Assembly are just place holders for items that we know we will need but that have not yet been designed or specified or purchased. Status Flags used in this file: % --> As of 2-Aug-2016 I have enough of this item at MSU for the prototype build of 8/9 cards. $ --> As of 2-Aug-2016 I have enough of this item at MSU for the total production of 34 cards. Note that $ --> % & --> An active order is currently out for this item. # --> A few of this item are available at MSU for evaluation. Bill of Materials for the Assembly House: ------------------------------------------- Item MSU Count Stock Status Number Part Number per Card at MSU Flags ------ -------------------- -------- ------ ------ 1 ACPL-217-56CE 1 50 $ 2 CTS_742C163_470_Ohm 3 0 3 Cap_100_nFd_0201 340 14k $ 4 Cap_100_nFd_0402 107 0 5 Cap_100_nFd_0603 174 0 6 Cap_100_pFd_0603 6 0 7 Cap_10_uFd_10_V_0805 141 0 8 Cap_10_uFd_25_V_1206 120 0 9 Cap_1_nFd_0603 20 0 10 Cap_1_uFd_0603 101 0 11 Cap_2.2_uFd_0603 47 0 12 Cap_220_nFd_0603 70 4k % 13 Cap_22_uFd_10_V_1206 34 0 14 Cap_22_uFd_25_V_1210 7 0 15 Cap_22_uFd_Tant_V 52 0 16 Cap_330_uFd_100V 2 80 $ 17 Cap_330_uFd_25V 2 80 $ 18 Cap_330_uFd_Tant_V 6 0 19 Cap_4.7_nFd_0402 74 0 20 Cap_470_uFd_Tant_V 26 0 21 Cap_47_nFd_0402 197 4k % 22 Cap_68_uFd_100V 2 80 $ 23 Conn_2x8 1 40 $ 24 Conn_Condo_RJ45 3 30 % 25 Conn_FCI_55714 2 80 $ 26 FCI_Conn_74221 2 20 % 27 Fuse_SMD_3A 7 MSU Stock $ from D-Zero 28 Header_2x20_2mm 1 40 $ 29 IC_2N3904 1 40 $ 30 IC_65LVDT2 2 100 $ 31 IC_74AVCH2T45 1 40 $ 32 IC_74AVCH8T245 3 160 $ 33 IC_74HC10 1 100 $ 34 IC_74HC21 2 100 $ 35 IC_74HCT04 1 100 $ 36 IC_74LVC07A 1 50 $ 37 IC_BCM53128 3 170 $ 38 IC_CDCLVD1216 1 40 $ 39 IC_CWX_813_25_MHz 1 40 $ 40 IC_KSZ9031RNX 2 80 $ 41 IC_LM3880 1 50 $ 42 IC_Linear_LT1764A 2 25 % 43 IC_MC100LVEP111 1 40 $ 44 IC_Micron_MT28GU01G 1 40 $ 45 IC_NB7VQ14M 74 700 % 46 IC_NC7SV05 6 250 $ 47 IC_NC7SV08 3 150 $ 48 IC_NC7SV157 1 60 $ 49 IC_PLL_320M6296 1 CMX Spares % must replace 50 IC_PLL_40M0787 1 CMX Spares % must replace 51 IC_REF3112 1 40 $ 52 IC_TI_CDCLVC1106 1 40 $ 53 IC_TPS3808 4 175 $ 54 IC_XCVU125 1 8 % 55 IC_ltc4315 3 125 $ 56 LED_673_BLUE 1 50 $ 57 LED_673_GREEN 3 125 $ 58 LED_676_RED 1 125 $ 59 LED_676_YELLOW 1 100 $ 60 LED_HSMR_C170_BLU 2 125 $ 61 LED_LGR971_GRN 23 950 $ 62 LED_LSR976_RED 2 125 $ 63 LED_LYR976_YEL 21 800 $ 64 MMSZ4680T1G 4 200 $ 65 MMSZ4683T1G 4 200 $ 66 MMSZ4686T1G 1 200 $ 67 Molex_877823003 1 12 % 68 POL_MDT040A 1 10 % 69 POL_PDT012A 3 30 % 70 POL_UDT020A 3 30 % 71 Pulse_HX5201NL 10 100 % 72 Res_0.5_Ohm_0603 4 160 $ 73 Res_1.24k_Ohm_0603 6 0 74 Res_100_Ohm_0603 18 2k $ 75 Res_100_Ohm_2010 2 0 76 Res_100_Ohm_Var 2 0 77 Res_10Meg_Ohm_1206 3 0 78 Res_10k_Ohm_0603 45 0 79 Res_10k_Ohm_0805 4 0 80 Res_12.1k_Ohm_0603 3 0 81 Res_150_Ohm_0402 18 0 82 Res_1k_Ohm_0603 26 2k $ 83 Res_2.49k_Ohm_0805 3 0 84 Res_2.7k_Ohm_0603 4 0 85 Res_20k_Ohm_0805 11 0 86 Res_22_Ohm_0603 31 0 87 Res_240_Ohm_0603 66 0 88 Res_330_Ohm_0603 4 0 89 Res_4.99k_Ohm_0603 57 0 90 Res_470_Ohm_0603 17 0 91 Res_49R9_Ohm_0603 80 0 92 Res_62_Ohm_0603 6 0 93 Res_84.5k_Ohm_0603 8 0 94 Res_Zero_Ohm_0603 10 2k $ 95 Switch_SDS002R 1 50 $ 96 SynQor_IQ65033 1 8 % 97 SynQor_PQ60120 1 8 % 98 TE_1766500-1 1 10 % 99 TE_2065657-1 5 50 % 100 Wurth_742792116 12 550 $ 101 Wurth_744311470 4 165 $ 102 Wurth_782633601 26 1100 $ 103 Wurth_7443320068 3 125 $ Bill of Materials for Final Assembly at MSU --------------------------------------------- From the date that the Hub Build is Released at the Assembly House we have about 1 month until we must have on hand the following parts for MSU Final Assembly. Because this list is not yet stable I have not assigned Item Numbers in it. Note that the total number of items needed for MSU Final Assembly is NOT trivial. This is typical. Item MSU Count Stock Status Number Part Number per Card at MSU Flags ------ -------------------- -------- ------ ------ - IC_AT93C66B_EEPROM 3 125 $ - IC_M24256 1 50 $ - LEMO Connector 1 MSU Stock $ May or May Not Install from D-Zero Run 1 - Backplane MPO Optical 2 to 4 2 # Feedthrough Connector Molex_106088 - Optical Ribbon Cable 2 Can use CMX spare MiniPOD Prizm Connector for the initial tests to MPO Connector but must replace custom ??? mm long or stock 500 mm Molex 106267-2011 about $120 each for stock 500 mm - Avago MiniPOD 1 Can use CMX spare Fiber Optic Transmitter for the initial tests Avago: AFBR-811FN1Z but must replace is 10 Gbps part that works well in CMX at 6.4 Gbps and costs about $ 340 each - Avago MiniPOD 1 Can use CMX spare Fiber Optic Receiver for the initial tests Avago: AFBR-821FN1Z but must replace is 10 Gbps part that works well in CMX at 6.4 Gbps and costs about $ 220 each - ATCA Guide Pin 2 25 % Receptacle TE_1-1469373-1 - LED Light Pipe 1 12 % Single Line, Circular, 1 Mentor Part No. 1271.1001 - LED Light Pipe 1 12 % Single Line, Circular, 2 Mentor Part No. 1271.1002 - LED Light Pipe 1 12 % Single Line, Circular, 3 Mentor Part No. 1271.1003 - LED Light Pipe 6 65 % Miniature, Circular, 8 Mentor Part No. 1296.1024 - Blank ATCA Front Panel 1 5 # about $100 each for blanks plus Machine Shop Cost plus Anodize Cost plus SilkScreen Cost I do not like the kind of front panel that I currently have examples of. - Lower Front Panel 1 0 Mounting Bracket Will need to be 100% custom Machine Shop Costs plus Anodize Cost - Upper Front Panel 1 0 Mounting Bracket Will need to be 100% custom Machine Shop Costs plus Anodize Cost - ATCA Back Side Panel 1 0 Will need to be 100% custom Machine Shop Costs plus Anodize Cost Initial MSU Tests do not need this part. - FPGA Heat-Sink 1 0 Will need to be 100% custom Machine Shop Costs plus Anodize Cost - MiniPOD Heat-Sink 2 0 Will need to be 100% custom Machine Shop Costs plus Anodize Cost - Machine Screws, Hex Nuts, Lock Nuts, Washers, Lock Washers, Stand-Offs, Springs Probably all SS M2.5 and M3 (maybe 4-40) Total cost about $300 - Feedback Loop Tuning 7 total 0 Capacitors for the DCDC Converters 0805 size Temp Stable Ceramic up to 7 different values - Feedback Loop Tuning 7 total 0 Resistors for the DCDC Converters 0805 size Temp Stable up to 7 different values - Output Voltage Set 16 total 0 Resistors for all 9 of the DCDC Converters 0805 size Temp Stable 6 different values - I2C Address Set 15 total 0 Resistors for the DCDC Converters and for the ATCA Power Entry Module 0805 size Temp Stable 10 different values Notes: Resistor Values that I currently know that I need for Final Assembly are: Zero_Ohm, 1.07k, 2.26k, 3.48k, 4.42k, 15,4k, 23.7k, 30.0k, 34.0k, 36.5k, 54.9k, 84.5k, 130k Additional resistor values will become apparent as Brian works out the Loop Filter component values. As normal I will sort through the spools of "MSU Stock" capacitors and resistors. I will find some number of matches. This is not an attempt to save money. Rather this saves Brenda Orders and keeps good parts out of the Landfill.