Hub Module    Four Brackets     Second Run
                   -------------

     Rev.  8-December-2017


     This work is for Wade Fisher on account:  RC104022


     Please make more of the  Hub Module  Delrin Brackets:


      - Top FP Bracket

          Please make  14  more  Top FP Brackets.

          There have been  no  changes in the design of this
          part since you previously made them in April 2017.


      - Bottom FP Bracket

          Please make  15  more  Bottom FP Brackets.

          There have been  no  changes in the design of this
          part since you previously made them in April 2017.


      - Middle FP Bracket

          Please make  26  Middle FP Brackets.

          This is a completely re-designed Middle FP Bracket
          compared to the ones that you previously made for
          the Hub Module in April 2017.


      - MPO Filler Bracket

          Please make  56  MPO Filler Brackets.

          This is a completely new part for the Hub Module.












     Material Supplied:

       - An example of each of the 4 brackets

         All parts have screws in the ends of the holes
         that are actually used to mount these parts.
         If these holes are likely to wander when drilling
         them then this is the end of the hole that should
         be accurately located.


       - Some  3/8" x 1"  and  1/2" x 1"  Delrin bar stock

         Please let me know how much Delrin you will need
         to make these parts and I will order it.


     Delivery by the end of January next year is fine.


     Please email or call if there are any questions and
     I can run right down to your shop to discuss things.


     Thank you for making these parts,

                Dan Edmunds