# # Hub ATCA Comps # # Key In Components File for the # HUB-0 ATLAS L1Calo Hub Module # ---=====----------------------------- # # Original Rev. 15-Mar-2015 # Most Recent Rev. 6-Feb-2017 # # # This file holds all of the ATCA components on the # Hub Module. This includes the ATCA power supply # components and all other comps directly related to ATCA. # # The ATCA IPMC Mezzanine and its associated components # are in a separate comps file. # # # # Board_Location # Ref Part_Number Symbol Geometry X Y Properties #----- ----------- ------ ------------------ -------------- ---------- # # # ATCA Power Components # Power_Entry SynQor_IQ65033 SY_JUNK ATCA_Power_Entry 132.50 23.00 1 0 Power_12V SynQor_PQ60120 SY_JUNK ATCA_Power_12V 56.50 23.00 1 0 F1 Fuse_SMD_3A SY_JUNK Fuse_SMD 201.00 16.10 1 0 F2 Fuse_SMD_3A SY_JUNK Fuse_SMD 201.00 8.00 1 0 F3 Fuse_SMD_3A SY_JUNK Fuse_SMD 218.00 16.10 1 0 F4 Fuse_SMD_3A SY_JUNK Fuse_SMD 218.00 8.00 1 0 F5 Fuse_SMD_3A SY_JUNK Fuse_SMD 235.00 16.10 1 0 F6 Fuse_SMD_3A SY_JUNK Fuse_SMD 235.00 8.00 1 0 R951 Res_100_Ohm_2010 SY_JUNK res_2512 236.60 8.00 2 180 R952 Res_100_Ohm_2010 SY_JUNK res_2512 236.60 16.10 2 180 R953 Res_2.49k_Ohm_0805 SY_JUNK res_0805 124.20 12.00 2 0 R954 Res_4.99k_Ohm_0603 SY_JUNK res_0603 114.50 21.20 2 90 R955 Res_20k_Ohm_0805 SY_JUNK res_0805 112.00 21.20 2 90 # # Power Entry Hold-Up Capacitors # C951 Cap_330_uFd_100V SY_JUNK ELECTRO_K 271.50 234.90 1 180 C952 Cap_330_uFd_100V SY_JUNK ELECTRO_K 271.50 257.90 1 180 # # Input Capacitors for the Isolated +12V Supply # C954 Cap_68_uFd_100V SY_JUNK ELECTRO_H 94.50 31.80 1 180 C955 Cap_68_uFd_100V SY_JUNK ELECTRO_H 94.50 17.00 1 0 # # Output Capacitors for the Isolated +12V Supply # C957 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 23.80 23.10 2 270 C958 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 27.10 23.10 2 270 C959 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 35.60 23.10 2 270 C960 Cap_10_uFd_25_V_1206 SY_JUNK cap_1206 38.90 23.10 2 270 C961 Cap_22_uFd_Tant_V SY_JUNK Tant_V_Case 43.40 23.10 2 90 C962 Cap_22_uFd_Tant_V SY_JUNK Tant_V_Case 48.70 23.10 2 90 C963 Cap_330_uFd_25V SY_JUNK ELECTRO_G 19.50 30.80 1 0 C964 Cap_330_uFd_25V SY_JUNK ELECTRO_G 19.50 15.50 1 180 # # AKA "component" for the Remote Sense Ground Connection # and for the Remote Sense on the Positive output terminal # of the Isolated +12V Supply # AKA1 Not_a_Part SY_JUNK AKA_1MM20 20.00 24.30 1 0 AKA2 Not_a_Part SY_JUNK AKA_1MM20 20.00 22.00 1 0 # # Opto-Isolator for the enable signal to the Isolated +12V Module # OPT1 ACPL-217-56CE SY_JUNK SOP_4 65.00 23.70 2 90 # # The ATCA ESD Strip on the Bottom Edge of Side 1 # # and the Silkscreen KEEP-OUT area boarders and labels, # and the mounting screw hole (and component pin) for # the Lower Handle on the front of the card. # # This is placed as TWO Geometries: # # ESD_Strip_Mid_Back SMD Component Pins 2 and 1 ESD_STRIP_MB # ESD_Strip_Front_Only THD Component Pin 3 ESD_STRIP_FO # ESD_STRIP_MB NOT_A_PART SY_JUNK ESD_Strip_Mid_Back 0.00 0.00 1 0 ESD_STRIP_FO NOT_A_PART SY_JUNK ESD_Strip_Front_Only 0.00 0.00 1 0 # # ATCA ESD Strip Resistors and Optional Grounds Connecting Jumper/Resistor # R957 Res_10Meg_Ohm_1206 SY_JUNK res_1206 146.00 8.00 2 180 R958 Res_10Meg_Ohm_1206 SY_JUNK res_1206 218.00 8.00 2 90 R959 Res_10Meg_Ohm_1206 SY_JUNK res_1206 46.00 10.00 2 0 # # The ATCA Handle Switch # # Do NOT move the location of the Handle Switch. # # On 5-Dec-16 the pcb mount handle switch scheme was # abandon in favor of the Elma type of front panel with # the switch in the handle and the connection to the pcb # made with discrete wire runs to a Molex connector. # # I will use a Molex 53047-0310 connector on the Hub pcb. # # This mates with the Molex 51021-0300 on the Elma switch # assembly. # # There is still the issue of the required polarity of the # switch to work with the supplied IPMC module and the # major problem that the people who made the IPMC want you # to run the switch on the Hot side of the line - a stupid # dangerous setup. R961 is to limit worst case current # from IPMC_3V3_SRC into the handle switch circuit. # # Because I do not understand the switch polarity I'm mounting # it in 3 vias so that I can rotate it by 180 degrees as necassary. # # The assembly house will not install this connector. # This is a through-hole part that we can install during # MSU Final Assembly. # ## SW1 Switch_SDS002R SY_JUNK ATCA_HNDL_SWCH 5.50 27.00 2 90 # WTERM71 Not_a_Part SY_JUNK Wrap_1mm0 7.75 29.50 1 0 WTERM72 Not_a_Part SY_JUNK Wrap_1mm0 6.50 29.50 1 0 WTERM73 Not_a_Part SY_JUNK Wrap_1mm0 5.25 29.50 1 0 R961 Res_100_Ohm_0603 SY_JUNK res_0603 6.50 32.00 2 0 # # Power Wiring Terminals # # Some of the Power Wiring connections on the Hub Module # must be run by discrete wires, #22 AWG. The Power Buses # that use discrete wire runs are: # # IPMC_3V3 from the ATCA Power Entry Module up to the IPMC # # CNST_5V0 from the ATCA Power Entry Module # up to the Power Supervisor Circuits # # ISO_12V from the ATCA ISO +12V Converter up to the DCDC Converters # note that this is to suplement the Area Fillss that carry # this power bus # # Hold-Up Caps two runs from the ATCA Power Entry Module # up to the Hold-Up Caps on the bump-out # These wires carry: Entered_N48V # Hold_Cap_Pos_Pow_Enter # # # The following set of WRAP_3mm0 components are the # connection points for all of these discrete wire runs: # # # For the IPMC_3V3 power bus: # WTERM1 Not_a_Part SY_JUNK Wrap_3mm0 96.50 40.50 1 0 WTERM2 Not_a_Part SY_JUNK Wrap_3mm0 30.00 271.40 1 0 # # For the CNST_5V0 power bus: # WTERM11 Not_a_Part SY_JUNK Wrap_3mm0 101.00 40.50 1 0 WTERM12 Not_a_Part SY_JUNK Wrap_3mm0 30.50 306.00 1 0 # # For the ISO_12V power bus: # WTERM21 Not_a_Part SY_JUNK Wrap_3mm0 16.00 8.30 1 0 WTERM22 Not_a_Part SY_JUNK Wrap_3mm0 20.50 8.30 1 0 WTERM23 Not_a_Part SY_JUNK Wrap_3mm0 25.00 8.30 1 0 WTERM25 Not_a_Part SY_JUNK Wrap_3mm0 30.50 217.50 1 0 WTERM26 Not_a_Part SY_JUNK Wrap_3mm0 112.00 213.00 1 0 WTERM27 Not_a_Part SY_JUNK Wrap_3mm0 252.00 227.00 1 0 # # For the Hold-Up Caps power connection: # # Net Entered_N48V WTERM31 Not_a_Part SY_JUNK Wrap_3mm0 97.40 8.30 1 0 WTERM32 Not_a_Part SY_JUNK Wrap_3mm0 266.30 246.40 1 0 # Net Hold_Cap_Pos_Pow_Enter WTERM41 Not_a_Part SY_JUNK Wrap_3mm0 91.00 8.30 1 0 WTERM42 Not_a_Part SY_JUNK Wrap_3mm0 276.70 246.40 1 0