#
#                         JTAG  Comps
#
#            Key In Components File  for the Hub Module
#           --------------------------------------------
#
#
#                                             Original Rev.  19-Nov-2015
#                                          Most Recent Rev.   5-Dec-2016
#
#
#   This file holds all of the  JTAG  and associated components.
#
#
#   Most of the JTAG components have reference Designators
#   in the range of  x551  through  x599.
#
#     - The caps are up at C294x  because the whole lower
#       range is used by the GTH Fanout caps.
#
#     - The jumpers are at 1 and 2.
#
#
#   JTAG and Associated Components
#
#
#                                                       Board_Location
# Ref    Part_Number   Symbol       Geometry               X       Y     Properties
#-----   -----------   ------   ------------------      --------------   ----------
#


#
#   JTAG Input and Output  3V3 to 1V8  Translators
#
#     located near the front panel J2 "Access" connector.
#

U554   IC_74AVCH8T245     SY_JUNK   tssop_24          13.00    46.00    2    0

U555   IC_74AVCH2T45      SY_JUNK   ssop_8            43.50   274.50    2   90



#
#   Default Input Pull-Up Resistors,  Series Terminator Resistors,
#
#   and ByPass capacitors   located with the Translators near J2.
#

R581    Res_4.99k_Ohm_0603   SY_JUNK   res_0603       11.00    44.00    1    0

R582    Res_4.99k_Ohm_0603   SY_JUNK   res_0603       11.00    46.00    1    0

R583    Res_4.99k_Ohm_0603   SY_JUNK   res_0603       11.00    48.00    1    0


R584    Res_22_Ohm_0603      SY_JUNK   res_0603       23.00    42.00    2    0

R585    Res_22_Ohm_0603      SY_JUNK   res_0603       23.00    44.00    2    0

R586    Res_22_Ohm_0603      SY_JUNK   res_0603       23.00    46.00    2    0

R587    Res_22_Ohm_0603      SY_JUNK   res_0603       23.00    48.00    2    0

R588    Res_22_Ohm_0603      SY_JUNK   res_0603       23.00    50.00    2    0

R590    Res_22_Ohm_0603      SY_JUNK   res_0603       23.00    52.00    2  180



C2941   Cap_100_nFd_0603     SY_JUNK   cap_0603       13.00    52.00    2    0

C2942   Cap_220_nFd_0603     SY_JUNK   cap_0603       13.00    40.00    2    0


C2943   Cap_220_nFd_0603     SY_JUNK   cap_0603       43.50   277.50    2    0

C2944   Cap_100_nFd_0603     SY_JUNK   cap_0603       43.50   271.50    2    0




#
#   Fuse for the JTAG Reference Power on pin #2 of front panel connector J2
#
#   located on side 1 near J2.
#

F7      Fuse_SMD_3A       SY_JUNK      Fuse_SMD        6.50    35.00    1    0




#
#   Now include the components that are located near the MegArray
#   Connectors.   These components include:
#
#      Multiplexer chip and its ByPass Capacitors
#      Series Terminator Resistor for the data out of this Mux
#      Pull-Up Resistor for the  ROD_Present_B  signal from the ROD
#

U556   IC_NC7SV157        SY_JUNK    sc70_6          179.00   283.50    2    0

U557   IC_NC7SV08         SY_JUNK    SC70_5          186.00   286.00    2   90


C2945   Cap_100_nFd_0603     SY_JUNK   cap_0603      178.20   287.00    2    0

C2946   Cap_220_nFd_0603     SY_JUNK   cap_0603      178.20   289.50    2    0

C2947   Cap_100_nFd_0603     SY_JUNK   cap_0603      187.80   283.00    2  180


R589    Res_22_Ohm_0603      SY_JUNK   res_0603      172.00   284.00    2  180

R591    Res_10k_Ohm_0603     SY_JUNK   res_0603      172.00   280.00    2  180

R593    Res_22_Ohm_0603      SY_JUNK   res_0603      193.00   285.00    2  180





#
#   Now include the components that are located near the Hub's FPGA.
#   These components include:
#
#      JMP1, JMP2  to skip JTAG around the Hub's FPGA
#      Isolation Resistor for the  ROD_Present_B  signal to the Hub's FPGA
#

JMP1    Res_Zero_Ohm_0603     SY_JUNK     res_0603        174.50   178.00    1  270

JMP2    Res_Zero_Ohm_0603  Not_Installed  res_0603_1sb    172.50   178.00    1  270

R592    Res_470_Ohm_0603      SY_JUNK     res_0603        172.00   277.00    2    0