//
//  file:  hub_0_pcb_silkscreen.txt
//
//  date:  Original Rev.  17-Apr-2014
//          Current Rev.  12-Jan-2017
//
//
//
//   Notes:
//
//      This file holds the manually added Silkscreen text
//      for the Hub circuit board.
//
//      The hub pcb design was broken up into various source
//      files on 11-Jan-2016.
//
//



$$text( "SILKSCREEN_1", "Hub Module",          273.0,  310.0, 4.00,  @BC, 0, 0.90, 0.20, "std", "None", 0.0, 0.0 );

$$text( "SILKSCREEN_1", "ATLAS L1Calo",        273.0,  282.3, 3.00,  @BC, 0, 0.90, 0.20, "std", "None", 0.0, 0.0 );

$$text( "SILKSCREEN_1", "MSU Physics",         273.0,  276.3, 3.00,  @BC, 0, 0.90, 0.20, "std", "None", 0.0, 0.0 );

$$text( "SILKSCREEN_1", "January-2017",        273.0,  270.3, 3.00,  @BC, 0, 0.90, 0.20, "std", "None", 0.0, 0.0 );



$$text( "SILKSCREEN_1", "MGT Fanout 2x74",     228.0,  186.0, 2.50,  @BC, 0, 0.90, 0.20, "std", "None", 0.0, 0.0 );




//
//   Label the Layers
//

$$text( "DRAWING_1", "MSU Physics     January 2017",             50.0, -13.0, 3.0,  @BC, 0, 0.90, 0.20, "std", "None", 0.0, 0.0 );


// $$text( "SIGNAL_1", "Trace Layer   TOP       Positive Data",  50.0,  -7.5, 3.0,  @BC, 0, 0.90, 0.20, "std", "None", 0.0, 0.0 );

// $$text( "POWER_1",  "GROUND Plane  BOTTOM    Negative Data",  50.0,  -7.5, 3.0,  @BC, 0, 0.90, 0.20, "std", "None", 0.0, 0.0 );


//$$text( "SILKSCREEN_1", "Silkscreen on TOP",                  50.0,  -7.5, 3.0,  @BC, 0, 0.90, 0.20, "std", "None", 0.0, 0.0 );


$$text( "SOLDER_MASK_1", "Solder Mask TOP",                   50.0,  -7.5, 3.0,  @BC, 0, 0.90, 0.20, "std", "None", 0.0, 0.0 );

$$text( "SOLDER_MASK_2", "Solder Mask BOTTOM",                50.0,  -7.5, 3.0,  @BC, 0, 0.90, 0.20, "std", "None", 0.0, 0.0 );

//
//  End of the Layer Labels
//




//
//   Some general Silk to help understand the Hub pcb:
//



//
//   Add a 2nd Circle in  Side 1  Silkscreen
//   to show the coil of slack Fiber Optic
//   Ribbon cable from the ROD to the MP0
//   mid-board optical connector.   The
//   center of this one turn coil is thought
//   to be at   X = 266.7 mm   Y = 257.0 mm.
//   The diameter of the coil is about  63.0 mm.

// //$$circle( "SILKSCREEN_1",  266.7,  257.0,  63.0,  0.20 );
// //$$circle( "SILKSCREEN_1",  266.7,  257.0,  62.5,  0.20 );