#
#                             Hub Module
#
#               MegArray Connector  S1  Upper  Template File
#             ---------------------===========----------------
#
#
#                                                 Original Rev.  23-Jun-2015
#                                              Most Recent Rev.  19-Jan-2017
#
#
#   Note:  The Small Via Pads are used on all Grounds in columns
#          F,G,H,J,K  where dual track routing must get through
#          the forest of Ground Vias.
#
#
#   Update on 18-Jan-2017 to use a small pin Via with a 0.13 mm
#   narrow dog-bone for just the actual MGT differential signal pins.
#
#



//  Row #<key_2_2>     E,F are Grounds    H,J is a Differential Pair

$$attribute( "COMPONENT_PIN_DEFINITION",     "A<key_2_2>", , @scale , , [ -6.615, <key_y_cn_up> ] );
$$attribute( "COMPONENT_PADSTACK_OVERRIDE",  "A<key_2_2>,    MegArray_PAD_VIA_W" );


$$attribute( "COMPONENT_PIN_DEFINITION",     "B<key_2_2>", , @scale , , [ -5.080, <key_y_nr_up> ] );
$$attribute( "COMPONENT_PADSTACK_OVERRIDE",  "B<key_2_2>,    MegArray_PAD_VIA_NW" );


$$attribute( "COMPONENT_PIN_DEFINITION",     "C<key_2_2>", , @scale , , [ -3.810, <key_y_nr_up> ] );
$$attribute( "COMPONENT_PADSTACK_OVERRIDE",  "C<key_2_2>,    MegArray_PAD_VIA_NW" );


$$attribute( "COMPONENT_PIN_DEFINITION",     "D<key_2_2>", , @scale , , [ -2.540, <key_y_nr_up> ] );
$$attribute( "COMPONENT_PADSTACK_OVERRIDE",  "D<key_2_2>,    MegArray_PAD_VIA_NW" );


$$attribute( "COMPONENT_PIN_DEFINITION",     "E<key_2_2>", , @scale , , [ -1.270, <key_y_nr_up> ] );
$$attribute( "COMPONENT_PADSTACK_OVERRIDE",  "E<key_2_2>,    MegArray_PAD_SML_VIA_NW" );


$$attribute( "COMPONENT_PIN_DEFINITION",     "F<key_2_2>", , @scale , , [  1.270, <key_y_nr_up> ] );
$$attribute( "COMPONENT_PADSTACK_OVERRIDE",  "F<key_2_2>,    MegArray_PAD_SML_VIA_NE" );


$$attribute( "COMPONENT_PIN_DEFINITION",     "G<key_2_2>", , @scale , , [  2.540, <key_y_nr_up> ] );
$$attribute( "COMPONENT_PADSTACK_OVERRIDE",  "G<key_2_2>,    MegArray_PAD_SML_VIA_NE" );


$$attribute( "COMPONENT_PIN_DEFINITION",     "H<key_2_2>", , @scale , , [  3.810, <key_y_nr_up> ] );
$$attribute( "COMPONENT_PADSTACK_OVERRIDE",  "H<key_2_2>,    MegArray_PAD_MGT_VIA_NE" );


$$attribute( "COMPONENT_PIN_DEFINITION",     "J<key_2_2>", , @scale , , [  3.810, <key_y_su_up> ] );
$$attribute( "COMPONENT_PADSTACK_OVERRIDE",  "J<key_2_2>,    MegArray_PAD_MGT_VIA_SW" );


$$attribute( "COMPONENT_PIN_DEFINITION",     "K<key_2_2>", , @scale , , [  6.350, <key_y_nr_up> ] );
$$attribute( "COMPONENT_PADSTACK_OVERRIDE",  "K<key_2_2>,    MegArray_PAD_SML_VIA_NE" );




//  Row #<key_3_2>     E,F is a Differential Pair    H,J are Grounds

$$attribute( "COMPONENT_PIN_DEFINITION",     "A<key_3_2>", , @scale , , [ -6.615, <key_y_cn_lw> ] );
$$attribute( "COMPONENT_PADSTACK_OVERRIDE",  "A<key_3_2>,    MegArray_PAD_VIA_W" );


$$attribute( "COMPONENT_PIN_DEFINITION",     "B<key_3_2>", , @scale , , [ -5.080, <key_y_nr_lw> ] );
$$attribute( "COMPONENT_PADSTACK_OVERRIDE",  "B<key_3_2>,    MegArray_PAD_VIA_NW" );


$$attribute( "COMPONENT_PIN_DEFINITION",     "C<key_3_2>", , @scale , , [ -3.810, <key_y_nr_lw> ] );
$$attribute( "COMPONENT_PADSTACK_OVERRIDE",  "C<key_3_2>,    MegArray_PAD_VIA_NW" );


$$attribute( "COMPONENT_PIN_DEFINITION",     "D<key_3_2>", , @scale , , [ -2.540, <key_y_nr_lw> ] );
$$attribute( "COMPONENT_PADSTACK_OVERRIDE",  "D<key_3_2>,    MegArray_PAD_VIA_NW" );


$$attribute( "COMPONENT_PIN_DEFINITION",     "E<key_3_2>", , @scale , , [  0.000, <key_y_nr_lw> ] );
$$attribute( "COMPONENT_PADSTACK_OVERRIDE",  "E<key_3_2>,    MegArray_PAD_MGT_VIA_NE" );


$$attribute( "COMPONENT_PIN_DEFINITION",     "F<key_3_2>", , @scale , , [  0.000, <key_y_su_lw> ] );
$$attribute( "COMPONENT_PADSTACK_OVERRIDE",  "F<key_3_2>,    MegArray_PAD_MGT_VIA_SW" );


$$attribute( "COMPONENT_PIN_DEFINITION",     "G<key_3_2>", , @scale , , [  2.540, <key_y_nr_lw> ] );
$$attribute( "COMPONENT_PADSTACK_OVERRIDE",  "G<key_3_2>,    MegArray_PAD_SML_VIA_NE" );


$$attribute( "COMPONENT_PIN_DEFINITION",     "H<key_3_2>", , @scale , , [  3.175, <key_y_cn_lw> ] );
$$attribute( "COMPONENT_PADSTACK_OVERRIDE",  "H<key_3_2>,    MegArray_PAD_2_WS" );


$$attribute( "COMPONENT_PIN_DEFINITION",     "J<key_3_2>", , @scale , , [  5.080, <key_y_nr_lw> ] );
$$attribute( "COMPONENT_PADSTACK_OVERRIDE",  "J<key_3_2>,    MegArray_PAD_SML_VIA_NE" );


$$attribute( "COMPONENT_PIN_DEFINITION",     "K<key_3_2>", , @scale , , [  6.350, <key_y_nr_lw> ] );
$$attribute( "COMPONENT_PADSTACK_OVERRIDE",  "K<key_3_2>,    MegArray_PAD_SML_VIA_NE" );