//
//  file:  electro_k_cap_geom.txt
//
//  Orig:  25-Mar-2015  original setup for Hub Module
//
//
//
//  Geometry for case size "K" aluminum electrolytic capacitor
//
//  Panasonic  FK  series low ESR aluminum electrolytic capacitor
//  for the Hub Module design.
//
//  330 uFd  100 Volt  Case "K16"  105 deg C.  Panasonic No.  EEE-FK2A331AM
//
//
//  And lots of other Panasonic electrolytic capacitors.
//
//



$abort_enable = @false;
$$lock_windows(@on) ;
$$snap_diagonal(@off) ;
$$snap_orthogonal(@off) ;



//----------------------------------------------------------------------------

$$create_pin("ELECTRO_K_PAD", @replace);

$$page(0.0,0.0,0.0, @mm, 0.0, 0.0, [0.0, 0.0, 'PI$ELECTRO_K_PAD']);

$$point_mode(@vertex);

$$polygon( "PAD", ,         [ 3.75, 1.25,    3.75, -1.25,    -3.75,  -1.25,    -3.75, 1.25 ]);

$$polygon( "SOLDER_MASK", , [ 3.80, 1.30,    3.80, -1.30,    -3.80,  -1.30,    -3.80, 1.30 ]);

$$polygon( "PASTE_MASK", ,  [ 3.75, 1.25,    3.75, -1.25,    -3.75,  -1.25,    -3.75, 1.25 ]);

$$attribute( "TERMINAL_SURFACE_DEFINITION", "");

//----------------------------------------------------------------------------



$$create_component("ELECTRO_K", @replace);

$$page(0.0,0.0,0.0, @mm, 0.0, 0.0, [0.0, 0.0, 'CO$ELECTRO_K']);

$$point_mode(@vertex);

$$attribute( "COMPONENT_LAYOUT_TYPE", "surface");

$$attribute( "COMPONENT_LAYOUT_SURFACE", "both");

$$attribute( "COMPONENT_HEIGHT", "10.20", , @scale , , [0.0, 0.0] );


//
//  Component Placement Outline for the  ELECTRO_K
//

$$initial([  -9.50,  -9.50 ], , @nosnap );
$$terminal([ -9.50,   9.50 ] );
$$terminal([  9.50,   9.50 ] );
$$terminal([  9.50,  -9.50 ] );

$$attribute( "COMPONENT_PLACEMENT_OUTLINE", "", @mark, @scale );



//
//   Silkscreen
//

$$path( "SILKSCREEN", 0.20 , , [ -4.50,  9.50,    9.50,  9.50 ]);
$$path( "SILKSCREEN", 0.20 , , [ -4.50, -9.50,    9.50, -9.50 ]);

$$path( "SILKSCREEN", 0.20 , , [  9.50,  9.50,    9.50,  1.60 ]);
$$path( "SILKSCREEN", 0.20 , , [  9.50, -1.60,    9.50, -9.50 ]);

$$path( "SILKSCREEN", 0.20 , , [ -4.50,  9.50,   -9.50,  4.50 ]);
$$path( "SILKSCREEN", 0.20 , , [ -4.50, -9.50,   -9.50, -4.50 ]);


$$path( "SILKSCREEN", 0.20 , , [ -9.50,  4.50,   -9.50,  1.60 ]);
$$path( "SILKSCREEN", 0.20 , , [ -9.40,  4.60,   -9.40,  1.60 ]);
$$path( "SILKSCREEN", 0.20 , , [ -9.30,  4.70,   -9.30,  1.60 ]);
$$path( "SILKSCREEN", 0.20 , , [ -9.20,  4.80,   -9.20,  1.60 ]);
$$path( "SILKSCREEN", 0.20 , , [ -9.10,  4.90,   -9.10,  1.60 ]);
$$path( "SILKSCREEN", 0.20 , , [ -9.00,  5.00,   -9.00,  1.60 ]);
$$path( "SILKSCREEN", 0.20 , , [ -8.90,  5.10,   -8.90,  1.60 ]);

$$path( "SILKSCREEN", 0.20 , , [ -9.50,  1.60,   -8.90,  1.60 ]);


$$path( "SILKSCREEN", 0.20 , , [ -9.50, -4.50,   -9.50, -1.60 ]);
$$path( "SILKSCREEN", 0.20 , , [ -9.40, -4.60,   -9.40, -1.60 ]);
$$path( "SILKSCREEN", 0.20 , , [ -9.30, -4.70,   -9.30, -1.60 ]);
$$path( "SILKSCREEN", 0.20 , , [ -9.20, -4.80,   -9.20, -1.60 ]);
$$path( "SILKSCREEN", 0.20 , , [ -9.10, -4.90,   -9.10, -1.60 ]);
$$path( "SILKSCREEN", 0.20 , , [ -9.00, -5.00,   -9.00, -1.60 ]);
$$path( "SILKSCREEN", 0.20 , , [ -8.90, -5.10,   -8.90, -1.60 ]);

$$path( "SILKSCREEN", 0.20 , , [ -9.50, -1.60,   -8.90, -1.60 ]);


$$path( "SILKSCREEN", 0.20 , , [ -9.20,  8.10,   -7.00,  8.10 ]);
$$path( "SILKSCREEN", 0.20 , , [ -8.10,  9.20,   -8.10,  7.00 ]);

//
//   End of Silkscreen
//



$$text( "SILKSCREEN", "^$ref", 0.0, -11.7, 1.5, @BC, 0, 0.7, 0.20, "std", "None", 0.0, 0.0 );



//  Define the two pins on the  ELECTRO_K:
//
//    pin #1 the positive terminal is to the left,  pin #2 to the right
//    the axis is horizontal


$$attribute( "COMPONENT_PIN_DEFINITION",    "1", , @scale , , [ -6.70,  0.00 ]);
$$attribute( "COMPONENT_PADSTACK_OVERRIDE", "1, ELECTRO_K_PAD");

$$attribute( "COMPONENT_PIN_DEFINITION",    "2", , @scale , , [  6.70,  0.00 ]);
$$attribute( "COMPONENT_PADSTACK_OVERRIDE", "2, ELECTRO_K_PAD");