!
!        TTCvi  Issue an  Event Counter Reset  Signal
!
!                  for the Hub Tests at MSU
!       ----------------------------------------------
!
!                                            Initial Rev.  7-Nov-2018
!                                            Current Rev.  8-Nov-2018
!
!
!  Execute this file to cause the TTC VME Crate in the MSU Hub/HTM
!  test stand to issue an  Event Counter Reset  signal.
!
!
!  Event Counter Reset     is a Short Format,  Non-Synchronous,
!                          B Channel,  Broadcast Command
!                          with the value  0x02
!
!
!  The base address of the TTCvi module is:  $ C0 000
!


!
!  Commands for Initial VME Setup:
!  -------------------------------

Bit3_Adaptor:    0

Address_Space:  24

Data_Size:      16


!
!  Write the value of the  Broadcast Command  to the
!  register for the  Short-Format Asynchronous Cycle:
!  --------------------------------------------------

VME_Address: 0xC000C4     ! Short-Format  Asynchronous Cycle

  Write_Value: 0x0002