Level 1 Accept Generates

    Skip Next BX, Scaler Control, Global L1 Fired Strobe, Plus
   ------------------------------------------------------------

                                                 Original Rev. 15-MAY-1997
                                                  Current Rev. 15-MAY-1997


A Framework Output Module will be used to generate a number of signals
every time a L1 Specific Trigger fires.  These signals include:

1. A Skip Next BX signal that is feed into a "Global Disable" input of
   all 16 of the Trigger Decision Modules.  This signal blocks the
   possibility of the Run II Framework generating a second L1 Trigger
   on during the tick following a tick where a legitimate L1 Trigger
   has fired.

2. A Scaler Control signal to keep the appropriate scalers from
   incrementing during ticks when all L1 Specific Triggers are disabled
   by the Skip Next BX signal.

3. The Run II L1 Framework will likely require a "Global L1 Fired Strobe"
   signal.  This signal could also be generated on this Framework Output
   Module.

These various signals listed above will likely require different amounts
of "stretching and latching" in order to have the proper width to perform
their required functions.