From:	SMTP%"hance@fnal.gov" 15-DEC-1998 13:19:36.22
Subj:	Electrical/Electronics Safety Guidelines

Gentlemen,

	I am sending these two documents to members of the
"Electronics Certification Board".  It is my hope that you might pass
them along to the various design groups that may someday wish to have an
electrical safety review prior to operating their equipment at Dzero. 
If they follow these guidelines, they might save themselves some trouble
getting approvals to operate their equipment unattended.

The documents are:

1) "Electrical Design Standards for Electronics to be used in Experiment
Apparatus at Fermilab".  Latest revision 10/16/98.  As approved by the
Laboratory Electrical Safety Subcommittee and soon to be adopted by the
Engineering Standards Committee.

2) Chapter 9 of the "DOE Handbook of Electrical Safety"
DOE-HDBK-1092-98.  Chapter 9 covers "Enclosed Electrical/Electronic
Equipment".  The Fermilab Electrical Safetly Subcommittee contributed to
this document which was adopted by the DOE in January 1998.

Rick