/* $TOG: imakemdep.h /main/101 1997/06/06 09:13:20 bill $ */ /* Copyright (c) 1993, 1994 X Consortium Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. Except as contained in this notice, the name of the X Consortium shall not be used in advertising or otherwise to promote the sale, use or other dealings in this Software without prior written authorization from the X Consortium. */ /* $XFree86: xc/config/imake/imakemdep.h,v 3.24.2.3 1997/07/27 02:41:05 dawes Exp $ */ /* * This file contains machine-dependent constants for the imake utility. * When porting imake, read each of the steps below and add in any necessary * definitions. In general you should *not* edit ccimake.c or imake.c! */ #ifdef CCIMAKE /* * Step 1: imake_ccflags * Define any special flags that will be needed to get imake.c to compile. * These will be passed to the compile along with the contents of the * make variable BOOTSTRAPCFLAGS. */ #if defined(clipper) || defined(__clipper__) #define imake_ccflags "-O -DSYSV -DBOOTSTRAPCFLAGS=-DSYSV" #endif #ifdef hpux #ifdef hp9000s800 #define imake_ccflags "-DSYSV" #else #define imake_ccflags "-Wc,-Nd4000,-Ns3000 -DSYSV" #endif #endif #if defined(macII) || defined(_AUX_SOURCE) #define imake_ccflags "-DmacII -DSYSV" #endif #ifdef stellar #define imake_ccflags "-DSYSV" #endif #if defined(USL) || defined(__USLC__) || defined(Oki) || defined(NCR) #define imake_ccflags "-Xa -DSVR4" #endif /* SCO may define __USLC__ so put this after the USL check */ #if defined(M_UNIX) || defined(_SCO_DS) #ifdef imake_ccflags #undef imake_ccflags #endif #define imake_ccflags "-Dsco -DSYSV" #endif #ifdef sony #if defined(SYSTYPE_SYSV) || defined(_SYSTYPE_SYSV) #define imake_ccflags "-DSVR4" #else #include #if NEWSOS < 41 #define imake_ccflags "-Dbsd43 -DNOSTDHDRS" #else #if NEWSOS < 42 #define imake_ccflags "-Dbsd43" #endif #endif #endif #endif #ifdef _CRAY #define imake_ccflags "-DSYSV -DUSG" #endif #if defined(_IBMR2) || defined(aix) #define imake_ccflags "-Daix -DSYSV" #endif #ifdef Mips # if defined(SYSTYPE_BSD) || defined(BSD) || defined(BSD43) # define imake_ccflags "-DBSD43" # else # define imake_ccflags "-DSYSV" # endif #endif #ifdef is68k #define imake_ccflags "-Dluna -Duniosb" #endif #ifdef SYSV386 # ifdef SVR4 # define imake_ccflags "-Xa -DSVR4" # else # define imake_ccflags "-DSYSV" # endif #endif #ifdef SVR4 # ifdef i386 # define imake_ccflags "-Xa -DSVR4" # endif #endif #ifdef SYSV # ifdef i386 # define imake_ccflags "-DSYSV" # endif #endif #ifdef __convex__ #define imake_ccflags "-fn -tm c1" #endif #ifdef apollo #define imake_ccflags "-DX_NOT_POSIX" #endif #ifdef WIN32 #if _MSC_VER < 1000 #define imake_ccflags "-nologo -batch -D__STDC__" #else #define imake_ccflags "-nologo -D__STDC__" #endif #endif #ifdef __uxp__ #define imake_ccflags "-DSVR4 -DANSICPP" #endif #ifdef __sxg__ #define imake_ccflags "-DSYSV -DUSG -DNOSTDHDRS" #endif #ifdef sequent #define imake_ccflags "-DX_NOT_STDC_ENV -DX_NOT_POSIX" #endif #ifdef _SEQUENT_ #define imake_ccflags "-DSYSV -DUSG" #endif #if defined(SX) || defined(PC_UX) #define imake_ccflags "-DSYSV" #endif #ifdef nec_ews_svr2 #define imake_ccflags "-DUSG" #endif #if defined(nec_ews_svr4) || defined(_nec_ews_svr4) || defined(_nec_up) || defined(_nec_ft) #define imake_ccflags "-DSVR4" #endif #ifdef MACH #define imake_ccflags "-DNOSTDHDRS" #endif /* this is for OS/2 under EMX. This won't work with DOS */ #if defined(__EMX__) #define imake_ccflags "-DBSD43" #endif #else /* not CCIMAKE */ #ifndef MAKEDEPEND /* * Step 2: dup2 * If your OS doesn't have a dup2() system call to duplicate one file * descriptor onto another, define such a mechanism here (if you don't * already fall under the existing category(ies). */ #if defined(SYSV) && !defined(_CRAY) && !defined(Mips) && !defined(_SEQUENT_) && !defined(sco) #define dup2(fd1,fd2) ((fd1 == fd2) ? fd1 : (close(fd2), \ fcntl(fd1, F_DUPFD, fd2))) #endif /* * Step 3: FIXUP_CPP_WHITESPACE * If your cpp collapses tabs macro expansions into a single space and * replaces escaped newlines with a space, define this symbol. This will * cause imake to attempt to patch up the generated Makefile by looking * for lines that have colons in them (this is why the rules file escapes * all colons). One way to tell if you need this is to see whether or not * your Makefiles have no tabs in them and lots of @@ strings. */ #if defined(sun) || defined(SYSV) || defined(SVR4) || defined(hcx) || defined(WIN32) || defined(sco) || (defined(AMOEBA) && defined(CROSS_COMPILE)) #define FIXUP_CPP_WHITESPACE #endif #ifdef WIN32 #define REMOVE_CPP_LEADSPACE #define INLINE_SYNTAX #define MAGIC_MAKE_VARS #endif #ifdef __minix_vmd #define FIXUP_CPP_WHITESPACE #endif /* * Step 4: USE_CC_E, DEFAULT_CC, DEFAULT_CPP * If you want to use cc -E instead of cpp, define USE_CC_E. * If use cc -E but want a different compiler, define DEFAULT_CC. * If the cpp you need is not in /lib/cpp, define DEFAULT_CPP. */ #ifdef hpux #define USE_CC_E #endif #ifdef WIN32 #define USE_CC_E #define DEFAULT_CC "cl" #endif #ifdef apollo #define DEFAULT_CPP "/usr/lib/cpp" #endif #if defined(clipper) || defined(__clipper__) #define DEFAULT_CPP "/usr/lib/cpp" #endif #if defined(_IBMR2) && !defined(DEFAULT_CPP) #define DEFAULT_CPP "/usr/ccs/lib/cpp" #endif #if defined(sun) && (defined(SVR4) || defined(__svr4__) || defined(__SVR4) || defined(__sol__)) #define DEFAULT_CPP "/usr/ccs/lib/cpp" #endif #ifdef __bsdi__ #define DEFAULT_CPP "/usr/bin/cpp" #endif #ifdef __uxp__ #define DEFAULT_CPP "/usr/ccs/lib/cpp" #endif #ifdef __sxg__ #define DEFAULT_CPP "/usr/lib/cpp" #endif #ifdef _CRAY #define DEFAULT_CPP "/lib/pcpp" #endif #if defined(__386BSD__) || defined(__NetBSD__) || defined(__OpenBSD__) || defined(__FreeBSD__) #define DEFAULT_CPP "/usr/libexec/cpp" #endif #if defined(__sgi) && defined(__ANSI_CPP__) #define USE_CC_E #endif #ifdef MACH #define USE_CC_E #endif #ifdef __minix_vmd #define DEFAULT_CPP "/usr/lib/cpp" #endif #if defined(__EMX__) /* expects cpp in PATH */ #define DEFAULT_CPP "cpp" #endif /* * Step 5: cpp_argv * The following table contains the flags that should be passed * whenever a Makefile is being generated. If your preprocessor * doesn't predefine any unique symbols, choose one and add it to the * end of this table. Then, do the following: * * a. Use this symbol in Imake.tmpl when setting MacroFile. * b. Put this symbol in the definition of BootstrapCFlags in your * .cf file. * c. When doing a make World, always add "BOOTSTRAPCFLAGS=-Dsymbol" * to the end of the command line. * * Note that you may define more than one symbol (useful for platforms * that support multiple operating systems). */ #define ARGUMENTS 50 /* number of arguments in various arrays */ char *cpp_argv[ARGUMENTS] = { "cc", /* replaced by the actual program to exec */ "-I.", /* add current directory to include path */ #ifdef unix "-Uunix", /* remove unix symbol so that filename unix.c okay */ #endif #if defined(__386BSD__) || defined(__NetBSD__) || defined(__OpenBSD__) || defined(__FreeBSD__) || defined(MACH) # ifdef __i386__ "-D__i386__", # endif # ifdef __GNUC__ "-traditional", # endif #endif #ifdef M4330 "-DM4330", /* Tektronix */ #endif #ifdef M4310 "-DM4310", /* Tektronix */ #endif #if defined(macII) || defined(_AUX_SOURCE) "-DmacII", /* Apple A/UX */ #endif #if defined(USL) || defined(__USLC__) "-DUSL", /* USL */ #endif #ifdef sony "-Dsony", /* Sony */ #if !defined(SYSTYPE_SYSV) && !defined(_SYSTYPE_SYSV) && NEWSOS < 42 "-Dbsd43", #endif #endif #ifdef _IBMR2 "-D_IBMR2", /* IBM RS-6000 (we ensured that aix is defined above */ #ifndef aix #define aix /* allow BOOTSTRAPCFLAGS="-D_IBMR2" */ #endif #endif /* _IBMR2 */ #ifdef aix "-Daix", /* AIX instead of AOS */ #ifndef ibm #define ibm /* allow BOOTSTRAPCFLAGS="-Daix" */ #endif #endif /* aix */ #ifdef ibm "-Dibm", /* IBM PS/2 and RT under both AOS and AIX */ #endif #ifdef luna "-Dluna", /* OMRON luna 68K and 88K */ #ifdef luna1 "-Dluna1", #endif #ifdef luna88k /* need not on UniOS-Mach Vers. 1.13 */ "-traditional", /* for some older version */ #endif /* instead of "-DXCOMM=\\#" */ #ifdef uniosb "-Duniosb", #endif #ifdef uniosu "-Duniosu", #endif #endif /* luna */ #ifdef _CRAY /* Cray */ "-Ucray", #endif #ifdef Mips "-DMips", /* Define and use Mips for Mips Co. OS/mach. */ # if defined(SYSTYPE_BSD) || defined(BSD) || defined(BSD43) "-DBSD43", /* Mips RISCOS supports two environments */ # else "-DSYSV", /* System V environment is the default */ # endif #endif /* Mips */ #ifdef MOTOROLA "-DMOTOROLA", /* Motorola Delta Systems */ # ifdef SYSV "-DSYSV", # endif # ifdef SVR4 "-DSVR4", # endif #endif /* MOTOROLA */ #if defined(M_UNIX) || defined(sco) "-Dsco", "-DSYSV", #endif #ifdef i386 "-Di386", # ifdef SVR4 "-DSVR4", # endif # ifdef SYSV "-DSYSV", # ifdef ISC "-DISC", # ifdef ISC40 "-DISC40", /* ISC 4.0 */ # else # ifdef ISC202 "-DISC202", /* ISC 2.0.2 */ # else # ifdef ISC30 "-DISC30", /* ISC 3.0 */ # else "-DISC22", /* ISC 2.2.1 */ # endif # endif # endif # endif # ifdef SCO "-DSCO", # ifdef _SCO_DS "-DSCO325 -DSVR4", # endif # endif # endif # ifdef ESIX "-DESIX", # endif # ifdef ATT "-DATT", # endif # ifdef DELL "-DDELL", # endif #endif #ifdef SYSV386 /* System V/386 folks, obsolete */ "-Di386", # ifdef SVR4 "-DSVR4", # endif # ifdef ISC "-DISC", # ifdef ISC40 "-DISC40", /* ISC 4.0 */ # else # ifdef ISC202 "-DISC202", /* ISC 2.0.2 */ # else # ifdef ISC30 "-DISC30", /* ISC 3.0 */ # else "-DISC22", /* ISC 2.2.1 */ # endif # endif # endif # endif # ifdef SCO "-DSCO", # ifdef _SCO_DS "-DSCO325 -DSVR4", # endif # endif # ifdef ESIX "-DESIX", # endif # ifdef ATT "-DATT", # endif # ifdef DELL "-DDELL", # endif #endif #ifdef __osf__ "-D__osf__", # ifdef __mips__ "-D__mips__", # endif # ifdef __alpha "-D__alpha", # endif # ifdef __alpha__ "-D__alpha__", # endif # ifdef __i386__ "-D__i386__", # endif # ifdef __GNUC__ "-traditional", # endif #endif #ifdef Oki "-DOki", #endif #ifdef sun #if defined(SVR4) || defined(__svr4__) || defined(__SVR4) || defined(__sol__) "-DSVR4", #endif #endif #ifdef WIN32 "-DWIN32", "-nologo", #if _MSC_VER < 1000 "-batch", #endif "-D__STDC__", #endif #ifdef NCR "-DNCR", /* NCR */ #endif #ifdef linux "-traditional", "-Dlinux", #endif #ifdef __uxp__ "-D__uxp__", #endif #ifdef __sxg__ "-D__sxg__", #endif #ifdef nec_ews_svr2 "-Dnec_ews_svr2", #endif #ifdef AMOEBA "-DAMOEBA", # ifdef CROSS_COMPILE "-DCROSS_COMPILE", # ifdef CROSS_i80386 "-Di80386", # endif # ifdef CROSS_sparc "-Dsparc", # endif # ifdef CROSS_mc68000 "-Dmc68000", # endif # else # ifdef i80386 "-Di80386", # endif # ifdef sparc "-Dsparc", # endif # ifdef mc68000 "-Dmc68000", # endif # endif #endif #if defined(__sgi) && defined(__ANSI_CPP__) "-cckr", #endif #ifdef __minix_vmd "-Dminix", #endif #if defined(__EMX__) "-traditional", "-Demxos2", #endif }; /* * Step 6: DEFAULT_OS_MAJOR_REV, DEFAULT_OS_MINOR_REV, DEFAULT_OS_TEENY_REV, * and DEFAULT_OS_NAME. * If your systems provides a way to generate the default major, * minor, teeny, or system names at runtime add commands below. * The syntax of the _REV strings is 'f fmt' where 'f' is an argument * you would give to uname, and "fmt" is a scanf() format string. * Supported uname arguments are "snrvm", and if you specify multiple * arguments they will be separated by spaces. No more than 5 arguments * may be given. Unlike uname() order of arguments matters. * * DEFAULT_OS_MAJOR_REV_FROB, DEFAULT_OS_MINOR_REV_FROB, * DEFAULT_OS_TEENY_REV_FROB, and DEFAULT_OS_NAME_FROB can be used to * modify the results of the use of the various strings. */ #if defined(aix) /* uname -v returns "x" (e.g. "4"), and uname -r returns "y" (e.g. "1") */ # define DEFAULT_OS_MAJOR_REV "v %[0-9]" # define DEFAULT_OS_MINOR_REV "r %[0-9]" /* No information available to generate default OSTeenyVersion value. */ # define DEFAULT_OS_NAME "srvm %[^\n]" #elif defined(sun) || defined(sgi) || defined(ultrix) || defined(__uxp__) || defined(sony) /* uname -r returns "x.y[.z]", e.g. "5.4" or "4.1.3" */ # define DEFAULT_OS_MAJOR_REV "r %[0-9]" # define DEFAULT_OS_MINOR_REV "r %*d.%[0-9]" # define DEFAULT_OS_TEENY_REV "r %*d.%*d.%[0-9]" # define DEFAULT_OS_NAME "srvm %[^\n]" #elif defined(hpux) /* uname -r returns "W.x.yz", e.g. "B.10.01" */ # define DEFAULT_OS_MAJOR_REV "r %*[^.].%[0-9]" # define DEFAULT_OS_MINOR_REV "r %*[^.].%*d.%1s" # define DEFAULT_OS_TEENY_REV "r %*[^.].%*d.%*c%[0-9]" # define DEFAULT_OS_NAME "srvm %[^\n]" #elif defined(USL) || defined(__USLC__) /* uname -v returns "x.yz" or "x.y.z", e.g. "2.02" or "2.1.2". */ # define DEFAULT_OS_MAJOR_REV "v %[0-9]" # define DEFAULT_OS_MINOR_REV "v %*d.%1s" # define DEFAULT_OS_TEENY_REV "v %*d.%*c%[.0-9]" # define DEFAULT_OS_NAME "srvm %[^\n]" #elif defined(__osf__) /* uname -r returns "Wx.y", e.g. "V3.2" or "T4.0" */ # define DEFAULT_OS_MAJOR_REV "r %*[^0-9]%[0-9]" # define DEFAULT_OS_MINOR_REV "r %*[^.].%[0-9]" # define DEFAULT_OS_NAME "srvm %[^\n]" #elif defined(__uxp__) /* NOTE: "x.y[.z]" above handles UXP/DF. This is a sample alternative. */ /* uname -v returns "VxLy Yzzzzz ....", e.g. "V20L10 Y95021 Increment 5 ..." */ # define DEFAULT_OS_MAJOR_REV "v V%[0-9]" # define DEFAULT_OS_MINOR_REV "v V%*dL%[0-9]" # define DEFAULT_OS_NAME "srvm %[^\n]" #elif defined(linux) # define DEFAULT_OS_MAJOR_REV "r %[0-9]" # define DEFAULT_OS_MINOR_REV "r %*d.%[0-9]" # define DEFAULT_OS_TEENY_REV "r %*d.%*d.%[0-9]" # define DEFAULT_OS_NAME "srm %[^\n]" #elif defined(ISC) /* ISC all Versions ? */ /* uname -r returns "x.y", e.g. "3.2" ,uname -v returns "x" e.g. "2" */ # define DEFAULT_OS_MAJOR_REV "r %[0-9]" # define DEFAULT_OS_MINOR_REV "r %*d.%[0-9]" # define DEFAULT_OS_TEENY_REV "v %[0-9]" /* # define DEFAULT_OS_NAME "srm %[^\n]" */ /* Not useful on ISC */ #elif defined(__FreeBSD__) /* BSD/OS too? */ /* uname -r returns "x.y[.z]-mumble", e.g. "2.1.5-RELEASE" or "2.2-0801SNAP" */ # define DEFAULT_OS_MAJOR_REV "r %[0-9]" # define DEFAULT_OS_MINOR_REV "r %*d.%[0-9]" # define DEFAULT_OS_TEENY_REV "r %*d.%*d.%[0-9]" # define DEFAULT_OS_NAME "srm %[^\n]" /* Use an alternate way to find the teeny version for -STABLE, -SNAP versions */ # define DEFAULT_OS_TEENY_REV_FROB(buf, size) \ do { \ if (*buf == 0) { \ int __mib[2]; \ size_t __len; \ int __osrel; \ \ __mib[0] = CTL_KERN; \ __mib[1] = KERN_OSRELDATE; \ __len = sizeof(__osrel); \ sysctl(__mib, 2, &__osrel, &__len, NULL, 0); \ if (__osrel < 210000) { \ if (__osrel < 199607) \ buf[0] = '0'; \ else if (__osrel < 199612) \ buf[0] = '5'; \ else if (__osrel == 199612) \ buf[0] = '6'; \ else \ buf[0] = '8'; /* guess */ \ } else { \ buf[0] = ((__osrel / 1000) % 10) + '0'; \ } \ buf[1] = 0; \ } \ } while (0) #elif defined(__OpenBSD__) /* uname -r returns "x.y", e.g. "3.7" */ # define DEFAULT_OS_MAJOR_REV "r %[0-9]" # define DEFAULT_OS_MINOR_REV "r %*d.%[0-9]" # define DEFAULT_OS_NAME "srm %[^\n]" # define DEFAULT_MACHINE_ARCHITECTURE "m %[^\n]" #elif defined(__NetBSD__) /* * uname -r returns "x.y([ABCD...]|_mumble)", e.g.: * 1.2 1.2_BETA 1.2A 1.2B * * That means that we have to do something special to turn the * TEENY revision into a form that we can use (i.e., a string of * decimal digits). * * We also frob the name DEFAULT_OS_NAME so that it looks like the * 'standard' NetBSD name for the version, e.g. "NetBSD/i386 1.2B" for * NetBSD 1.2B on an i386. */ # define DEFAULT_OS_MAJOR_REV "r %[0-9]" # define DEFAULT_OS_MINOR_REV "r %*d.%[0-9]" # define DEFAULT_OS_TEENY_REV "r %*d.%*d%[A-Z]" # define DEFAULT_OS_TEENY_REV_FROB(buf, size) \ do { \ if (*(buf) >= 'A' && *(buf) <= 'Z') /* sanity check */ \ snprintf((buf), (size), "%d", *(buf) - 'A' + 1); \ else \ *(buf) = '\0'; \ } while (0) # define DEFAULT_OS_NAME "smr %[^\n]" # define DEFAULT_OS_NAME_FROB(buf, size) \ do { \ char *__sp; \ if ((__sp = strchr((buf), ' ')) != NULL) \ *__sp = '/'; \ } while (0) #endif #else /* else MAKEDEPEND */ /* * Step 7: predefs * If your compiler and/or preprocessor define any specific symbols, add * them to the the following table. The definition of struct symtab is * in util/makedepend/def.h. */ struct symtab predefs[] = { #ifdef apollo {"apollo", "1"}, #endif #if defined(clipper) || defined(__clipper__) {"clipper", "1"}, {"__clipper__", "1"}, {"clix", "1"}, {"__clix__", "1"}, #endif #ifdef ibm032 {"ibm032", "1"}, #endif #ifdef ibm {"ibm", "1"}, #endif #ifdef aix {"aix", "1"}, #endif #ifdef sun {"sun", "1"}, #endif #ifdef sun2 {"sun2", "1"}, #endif #ifdef sun3 {"sun3", "1"}, #endif #ifdef sun4 {"sun4", "1"}, #endif #ifdef sparc {"sparc", "1"}, #endif #ifdef __sparc__ {"__sparc__", "1"}, #endif #ifdef hpux {"hpux", "1"}, #endif #ifdef __hpux {"__hpux", "1"}, #endif #ifdef __hp9000s800 {"__hp9000s800", "1"}, #endif #ifdef __hp9000s700 {"__hp9000s700", "1"}, #endif #ifdef vax {"vax", "1"}, #endif #ifdef VMS {"VMS", "1"}, #endif #ifdef cray {"cray", "1"}, #endif #ifdef CRAY {"CRAY", "1"}, #endif #ifdef _CRAY {"_CRAY", "1"}, #endif #ifdef att {"att", "1"}, #endif #ifdef mips {"mips", "1"}, #endif #ifdef __mips__ {"__mips__", "1"}, #endif #ifdef ultrix {"ultrix", "1"}, #endif #ifdef stellar {"stellar", "1"}, #endif #ifdef mc68000 {"mc68000", "1"}, #endif #ifdef mc68020 {"mc68020", "1"}, #endif #ifdef __GNUC__ {"__GNUC__", "1"}, #endif #if __STDC__ {"__STDC__", "1"}, #endif #ifdef __HIGHC__ {"__HIGHC__", "1"}, #endif #ifdef CMU {"CMU", "1"}, #endif #ifdef linux {"linux", "1"}, #endif #ifdef luna {"luna", "1"}, #ifdef luna1 {"luna1", "1"}, #endif #ifdef luna2 {"luna2", "1"}, #endif #ifdef luna88k {"luna88k", "1"}, #endif #ifdef uniosb {"uniosb", "1"}, #endif #ifdef uniosu {"uniosu", "1"}, #endif #endif #ifdef ieeep754 {"ieeep754", "1"}, #endif #ifdef is68k {"is68k", "1"}, #endif #ifdef m68k {"m68k", "1"}, #endif #ifdef m88k {"m88k", "1"}, #endif #ifdef __m88k__ {"__m88k__", "1"}, #endif #ifdef bsd43 {"bsd43", "1"}, #endif #ifdef hcx {"hcx", "1"}, #endif #ifdef sony {"sony", "1"}, #ifdef SYSTYPE_SYSV {"SYSTYPE_SYSV", "1"}, #endif #ifdef _SYSTYPE_SYSV {"_SYSTYPE_SYSV", "1"}, #endif #endif #ifdef __OSF__ {"__OSF__", "1"}, #endif #ifdef __osf__ {"__osf__", "1"}, #endif #ifdef __alpha {"__alpha", "1"}, #endif #ifdef __alpha__ {"__alpha__", "1"}, #endif #ifdef __DECC {"__DECC", "1"}, #endif #ifdef __decc {"__decc", "1"}, #endif #ifdef __unix__ {"__unix__", "1"}, #endif #ifdef __uxp__ {"__uxp__", "1"}, #endif #ifdef __sxg__ {"__sxg__", "1"}, #endif #ifdef _SEQUENT_ {"_SEQUENT_", "1"}, {"__STDC__", "1"}, #endif #ifdef __bsdi__ {"__bsdi__", "1"}, #endif #ifdef nec_ews_svr2 {"nec_ews_svr2", "1"}, #endif #ifdef nec_ews_svr4 {"nec_ews_svr4", "1"}, #endif #ifdef _nec_ews_svr4 {"_nec_ews_svr4", "1"}, #endif #ifdef _nec_up {"_nec_up", "1"}, #endif #ifdef SX {"SX", "1"}, #endif #ifdef nec {"nec", "1"}, #endif #ifdef _nec_ft {"_nec_ft", "1"}, #endif #ifdef PC_UX {"PC_UX", "1"}, #endif #ifdef sgi {"sgi", "1"}, #endif #ifdef __sgi {"__sgi", "1"}, #endif #ifdef __FreeBSD__ {"__FreeBSD__", "1"}, #endif #ifdef __OpenBSD__ {"__OpenBSD__", "1"}, #endif #ifdef __NetBSD__ {"__NetBSD__", "1"}, #endif #ifdef __ELF__ {"__ELF__", "1"}, #endif #ifdef __EMX__ {"__EMX__", "1"}, #endif #ifdef __APPLE__ {"__APPLE__", "1"}, #endif #ifdef __ppc__ {"__ppc__", "1"}, #endif /* add any additional symbols before this line */ {NULL, NULL} }; #endif /* MAKEDEPEND */ #endif /* CCIMAKE */