#
#             CPU  DDR4  Reference & Terminator Supply
#            -----
#
#              Disco-Kraken  Key-In  Components File
#          ---------------------------------------------
#
#
#                                                 Original Rev.  13-Mar-2023
#                                              Most Recent Rev.  15-Nov-2023
#
#
#   This file holds all of the  components for the
#   DDR4  Reference & Terminator Supplies for the CPU
#   section of the FPGA/CPU.
#
#
#   This is a  Relatively Placed Component Set  comps file.
#
#
#   I will center this file on  U1941  the power supply
#   chip for the CPU DDR4 Reference and Terminator supply.
#
#   As a nominal starting location,  place U1941 at
#   X = -13.50 mm  and  Y = -80.00 mm  wrt the FPGA/CPU.
#



#
#                                                       Board_Location
# Ref    Part_Number   Symbol     Geometry                 X       Y      Properties
#-----   -----------   ------   ------------------     ----------------   ----------
#


U1941    TPS51200       SY_JUNK   VSON_10                0.00     0.00      1   270



#
#   Bypass Caps on the  BULK_3V3  Vin Aux Power  power supply chip pin 10:
#

C1941    Cap_22_uFd_10_V_1206    SY_JUNK   Cap_1206      5.80    -2.00      1     0
C1942    Cap_100_nFd_16_V_0402   SY_JUNK   Cap_0402      1.40    -3.00      1     0



#
#   Bypass Caps on the  DDR4_1V2  VLDO_IN Power  power supply chip pin 2:
#

C1943    Cap_22_uFd_10_V_1206    SY_JUNK   Cap_1206      5.60     3.90      1     0
C1944    Cap_100_nFd_16_V_0402   SY_JUNK   Cap_0402      1.00     4.00      1    90



#
#   Bypass Caps on the  DDR4  Terminator  Power Output  power supply chip pin 3:
#

C1945    Cap_100_nFd_16_V_0402   SY_JUNK   Cap_0402     -0.50     4.00      1    90
C1946    Cap_22_uFd_10_V_1206    SY_JUNK   Cap_1206     -5.00     3.90      1     0



#
#   Bypass Caps on the  DDR4  Reference Output  from the power supply chip pin 6:
#

C1947    Cap_100_nFd_16_V_0402   SY_JUNK   Cap_0402     -3.50    -1.00      1    90



#
#   Reference Input  to the power supply chip pin 1:
#

C1948    Cap_100_nFd_16_V_0402   SY_JUNK   Cap_0402      4.00     0.90      1    90
R1941    Res_10.0k_Ohm_0603      SY_JUNK   Res_0603      9.50     2.50      1    90
R1942    Res_10.0k_Ohm_0603      SY_JUNK   Res_0603      9.50    -1.50      1    90



#
#   Voltage Monitor on the Output of this Terminator Supply:
#

R1943        Res_220_Ohm_0603   SY_JUNK   res_0603      -6.0     -1.5       1    0

C1949     Cap_1_uFd_25_V_0603   SY_JUNK   Cap_0603      -6.0      1.5       1    0