# # Sundry Disco-Kraken Comps # # Disco-Kraken Key In Components File # -------------------------------------- # # # Original Rev. 6-Feb-2023 # Most Recent Rev. 15-Dec-2023 # # # This file holds all of the Sundry DK components. # # # # Contents: # UNITS MM # # Board_Location # Ref Part_Number Symbol Geometry X Y Properties #----- ----------- ------ ------------------ -------------- ---------- # # # Temporary placement of the DK Power Supply Monitor connector J11 # J11 Molex_87832_4020 SY_JUNK Header_2x20_2mm 202.7 6.0 1 90 # # Currrently there is no TOMCat JTAG J10 connector # # # Place the Silk TOMcat and its Samtec ERF8 connector # # They currently get an Illegal Placement error because # the ERF8 is too close to a mounting hole on the TOMcat. # # With their current geometries, the Delta_X and Delta_Y # in their relative placements are: 22.15 mm X 7.70 mm Y # ###TOMcat TOMcat SY_JUNK TOMcat_Silk 58.50 27.60 1 180 ##MEZZ1 Samtec_ERF8-025 SY_JUNK Sam_ERF8_025 36.35 35.30 1 270 ###MEZZ1 Samtec_ERF8-025 SY_JUNK Sam_ERF8_025 46.35 35.30 1 270 # # Board_Location # Ref Part_Number Symbol Geometry X Y Properties #----- ----------- ------ ------------------ -------------- ---------- # # # Ground Rivets Used by High-Speed Signals and # around the perimeter of the board. # # # These rivets will not appear in the BOM file. # # Ground Rivets Along the Top Edge (aka North Edge) ##GR1 Not_a_Part SY_JUNK Rivet_Via_1mm1 43.00 310.00 1 0 ##GR2 Not_a_Part SY_JUNK Rivet_Via_1mm1 68.00 310.00 1 0 # Scope Probe Ground Loops ##WTERM1 Not_a_Part SY_JUNK Wrap_3mm0 245.00 60.00 1 0 ##WTERM2 Not_a_Part SY_JUNK Wrap_3mm0 265.00 60.00 1 0