#
#        Didsco-Kraken   Relatively Placed   Components  File
#       -----------------=================---==========-------
#
#
#        UBS Phy Chip  and  its Power & Ground Connections
#        -------       and  its Connections to the DK's CPU
#       ------------------------------------------------------
#
#
#                                                 Original Rev.  25-Nov-2023
#                                              Most Recent Rev. 23-July-2024
#
#
#  This file holds the Components for the   USB Phy Chip
#  This is a key in comps file.
#
#  The  2 Port USB Hub  components are in a separate comps file.
#


UNITS MM


#
#                                                       Board_Location
# Ref    Part_Number   Symbol     Geometry                 X       Y     Properties
#-----   -----------   ------   ------------------      --------------   ----------
#

U1051    USB3340                 SY_JUNK    qfn_32_32sq      0.0     0.0     1  180




#
#    Jumpers and Pull-Up Resistors to Setup the USB Phy Chip:
#   ----------------------------------------------------------
#

JMP1051   Res_Zero_Ohm_0603       SY_JUNK      Res_0603         5.5     6.0     2    0
JMP1052   JUMPER_0603          Not_Installed   Res_0603_1sb     5.5     8.0     2    0

JMP1053   Res_Zero_Ohm_0603       SY_JUNK      Res_0603         0.5     6.0     2    0
JMP1054   JUMPER_0603          Not_Installed   Res_0603_1sb     0.5     8.0     2    0

JMP1055   Res_Zero_Ohm_0603       SY_JUNK      Res_0603        -4.5     6.0     2    0
JMP1056   JUMPER_0603          Not_Installed   Res_0603_1sb    -4.5     8.0     2    0


JMP1057   JUMPER_0603          Not_Installed   Res_0603_1sb    -4.5    -7.0     2    0
JMP1058   Res_Zero_Ohm_0603       SY_JUNK      Res_0603        -8.5    -7.0     2    0

R1065     Res_20.0k_Ohm_0603      SY_JUNK      Res_0603        -4.5    -4.5     2    0
R1066     Res_Open_Ohm_0603    Not_Installed   Res_0603_1sb    -8.5    -4.5     2    0

TP1051    Test_Point_No_BOM     SY_JUNK   single_smd_comp      -7.5     6.0     1    0




#
#    Internal PS Bypass and Bias  RCs  for the USB Phy Chip:
#   ---------------------------------------------------------
#

C1055   Cap_1_uFd_25_V_0603     SY_JUNK   Cap_0603        -7.0     1.5     1    0

C1056   Cap_1_uFd_25_V_0603     SY_JUNK   Cap_0603        -0.1    -6.5     1   90

R1064   Res_8.06k_Ohm_0603      SY_JUNK   Res_0603        -7.0    -2.5     1    0




#
#     Attenuator for the FPGA Clock Signal to the USB Phy chip:
#   ------------------------------------------------------------
#

R1067   Res_20.0k_Ohm_0603      SY_JUNK   Res_0603        -2.3    -6.5     1   90

R1068   Res_20.0k_Ohm_0603      SY_JUNK   Res_0603        -4.5    -6.5     1   90

C1078   Cap_100_nFd_25_V_0603   SY_JUNK   Cap_0603        -6.7    -6.5     1   90




#
#    3V3  Power Filter and Bypass Capacitors for the  USB Phy Chip:
#   ----------------------------------------------------------------
#

L1051   Wurth_742792116    SY_JUNK   Wurth_1206_Ind        6.5    -7.0     2    0

C1051   Cap_22_uFd_10_V_1206    SY_JUNK   cap_1206         6.2    -4.5     1    0

C1052   Cap_100_nFd_25_V_0603   SY_JUNK   Cap_0603         2.7    -5.0     1   90




#
#    5V0  Bypass Capacitors for the  USB Phy Chip:
#   -----------------------------------------------
#

C1053   Cap_22_uFd_10_V_1206    SY_JUNK   cap_1206        -8.0    -0.5     2    0

C1054   Cap_100_nFd_25_V_0603   SY_JUNK   Cap_0603        -7.0    -0.3     1    0