#
#                      Disco-Kraken Module
#
#           DCDC Converter Net List  Template  File
#          ----------------========--========-------
#
#
#                                                 Original Rev.   5-Feb-2023
#                                              Most Recent Rev.  17-Nov-2023
#
#
#
#  This  Template  file holds the nets for the DK
#  DC/DC Power Converters.   These converters run
#  from the  BULK_5V0  bus and it make the 6 BULK
#  power rails that are used by the DK board itself.
#
#
#  For reference recall the 6 DCDC Converters on DK:
#
#                       Output
#   Converter    Ref.     Power      Output      Expected     Output    Power Trends
#      Name     Desig      Bus      Voltage        Load      Capacity   Model Number
#   ---------   -----   ---------   -------    -----------   --------   ------------
#
#      DCDC1     1701   Bulk_1V00    1.00 V    about 1.4 A      3 A     PTH04T260WAD
#      DCDC2     1731   Bulk_1V05    1.05 V    under 3.0 A      6 A     PTH04T230WAD
#      DCDC3     1761   Bulk_1V2     1.20 V    about 4.0 A      6 A     PTH04T230WAD
#      DCDC4     1791   Bulk_1V8     1.80 V    under 1.5 A      3 A     PTH04T260WAD
#      DCDC5     1821   Bulk_2V5     2.50 V    about 1.4 A      3 A     PTH04T260WAD
#      DCDC6     1851   Bulk_3V3     3.30 V    under 1.5 A      3 A     PTH04T260WAD
#
#
#
#   Define the Connections within the  DCDC Power Converter
#  ---------------------------------------------------------
#


#
#   Input Power to the Converter:

NET  'BULK_5V0'                 R<key_170_30>1-2                # Power to the Current Sense Resistor

NET  'DCDC<key_1_1>_CSR_TO_L'   R<key_170_30>1-3                # Power from the Current Sense
NET  'DCDC<key_1_1>_CSR_TO_L'   L<key_170_30>1-1                # Resistor to the Filter Inductor

NET  'DCDC<key_1_1>_INPUT'      L<key_170_30>1-2                # Power feed to the Converter

NET  'DCDC<key_1_1>_INPUT'      C<key_170_30>1-1   C<key_170_30>2-1    # Tantalum Input Caps
NET  'DCDC<key_1_1>_INPUT'      C<key_170_30>3-1   C<key_170_30>4-1    # Tantalum Input Caps

NET  'DCDC<key_1_1>_INPUT'      C<key_170_30>5-2   C<key_170_30>6-1    # Ceramic Input Caps
NET  'DCDC<key_1_1>_INPUT'      C<key_170_30>7-2   C<key_170_30>8-2    # Ceramic Input Caps

NET  'DCDC<key_1_1>_INPUT'      DCDC<key_1_1>-2                        # Power Input to the Converter - Pin #2

NET  'GROUND'               C<key_170_30>1-2     C<key_170_30>2-2      # Tantalum Cap Grounds
NET  'GROUND'               C<key_170_30>3-2     C<key_170_30>4-2      # Taltalum Cap Grounds
NET  'GROUND'               C<key_170_30>5-1     C<key_170_30>6-2      # Ceramic  Cap Grounds
NET  'GROUND'               C<key_170_30>7-1     C<key_170_30>8-1      # Ceramic  Cap Grounds



#
#   Power Output from the Converter:

NET  'DCDC<key_1_1>_Bulk_Output'   DCDC<key_1_1>-4            # Output Power from the Converter - Pin #4

NET  'DCDC<key_1_1>_Bulk_Output'   C<key_170_30>9-1   C<key_171_30>0-1    # Ceramic Output Caps
NET  'DCDC<key_1_1>_Bulk_Output'   C<key_171_30>1-2   C<key_171_30>2-1    # Ceramic Output Caps

NET  'DCDC<key_1_1>_Bulk_Output'   C<key_171_30>3-1   C<key_171_30>4-1    # Tantalum Output Caps
NET  'DCDC<key_1_1>_Bulk_Output'   C<key_171_30>5-1   C<key_171_30>6-1    # Tantalum Output Caps

NET  'DCDC<key_1_1>_Bulk_Output'   DZ<key_170_30>1-1                      # Output Zener Clamp

NET  'GROUND'             C<key_170_30>9-2   C<key_171_30>0-2      # Ceramic  Cap Grounds
NET  'GROUND'             C<key_171_30>1-1   C<key_171_30>2-2      # Ceramic  Cap Grounds
NET  'GROUND'             C<key_171_30>3-2   C<key_171_30>4-2      # Tantalum Cap Grounds
NET  'GROUND'             C<key_171_30>5-2   C<key_171_30>6-2      # Tantalum Cap Grounds

NET  'GROUND'             DZ<key_170_30>1-2                        # Zener Clamp Ground



#
#   DC/DC Converter  GROUND  Pins

NET  'GROUND'    DCDC<key_1_1>-3                        # Converter Ground Pin - Pin #3
NET  'GROUND'    DCDC<key_1_1>-31   DCDC<key_1_1>-32    # Converter Auxiliary Ground Pins



#
#   DC/DC Converter  Tracking  Pin

NET  'DCDC_CONV_TRACK'    DCDC<key_1_1>-9               # TRACK Pin of this DCDC Converter - Pin #9



#
#   DC/DC Converter  Feedback Remote Sense  Pins

NET  'DCDC<key_1_1>_Bulk_Output'   AKA<key_170_30>1-2                      # Positive SENSE Remote Connection
NET  'DCDC<key_1_1>_SEN_POS'       AKA<key_170_30>1-1   DCDC<key_1_1>-5    # Positive SENSE input pin - Pin #5

NET  'GROUND'                      AKA<key_170_30>2-2                      # Negative SENSE Remote Connection
NET  'DCDC<key_1_1>_SEN_NEG'       AKA<key_170_30>2-1   DCDC<key_1_1>-6    # Negative SENSE input pin - Pin #6



#
#   DC/DC Converter  Output Voltage  Rset  Resistor
#   with capacitor across the variable part of the Vout Rset Resistor
#
#   NOTE:  Ground Reference  not Negative Sense Reference

NET  'GROUND'                  R<key_170_30>3-1   R<key_170_30>3-2    # Want Trim Pot CW Truning to:
NET  'DCDC<key_1_1>_VAR_FIX'   R<key_170_30>3-3                       # Reduce the Resistance and
NET  'DCDC<key_1_1>_VAR_FIX'   R<key_170_30>2-2                       # Increase the Output Voltage

NET  'DCDC<key_1_1>_VO_ADJ'    R<key_170_30>2-1   DCDC<key_1_1>-7     # Converter Rset Vout Adj pin - Pin #7

NET  'DCDC<key_1_1>_VAR_FIX'   C<key_171_30>7-1                       # Capacitor across the
NET  'GROUND'                  C<key_171_30>7-2                       # Vout Trim Pot Resistor



#
#   DC/DC Converter  Transient Response Control  Pin

NET  'DCDC<key_1_1>_TRC_PIN'   R<key_170_30>4-2   DCDC<key_1_1>-8    # Transient Response Control pin - Pin #8
NET  'DCDC<key_1_1>_SEN_POS'   R<key_170_30>4-1                      # Transient Response Resistor



#
#   DC/DC Converter  INH-UVLO  Pin  and  Resistor

NET  'DCDC<key_1_1>_INH_UVLO'   R<key_170_30>5-1   DCDC<key_1_1>-10    # INH-UVLO  Pin #10
NET  'GROUND'                   R<key_170_30>5-2                       # Ground end of UVLO Resistor



#
#   DC/DC Converter  Sync Pin  tied to Ground  via  trace

NET  'DCDC<key_1_1>_SYNC'   AKA<key_170_30>3-1   DCDC<key_1_1>-1    # Converter's SYNC Pin - Pin #1
NET  'GROUND'               AKA<key_170_30>3-2                      # Tie SYNC Pin to Ground




#
#   Current Sense Resistor to Filter and to Current Monitor Connector Pins

NET  'DCDC<key_1_1>_CS_POS'      R<key_170_30>1-4   R<key_170_30>6-1    # Current Sense Res. to Filter Res.
NET  'DCDC<key_1_1>_CS_NEG'      R<key_170_30>1-1   R<key_170_30>7-1    # Current Sense Res. to Filter Res.

NET  'IMON_POS_DCDC<key_1_1>'    R<key_170_30>6-2   C<key_171_30>8-1    # Current Monitor Filter Res Cap Pin
NET  'IMON_NEG_DCDC<key_1_1>'    R<key_170_30>7-2   C<key_172_30>0-2    # Current Monitor Filter Res Cap Pin

NET  'IMON_POS_DCDC<key_1_1>'    C<key_171_30>9-1                       # Current Monitor Shunt Cap
NET  'IMON_NEG_DCDC<key_1_1>'    C<key_171_30>9-2                       # Current Monitor Shunt Cap

NET  'GROUND'                    C<key_171_30>8-2   C<key_172_30>0-1    # Current Monitor Filter Cap Grounds




#
#   Voltage Monitor Filter and to Voltage Monitor Connector Pin

NET  'DCDC<key_1_1>_Bulk_Output'   R<key_170_30>8-1                       # Voltage Monitor Filter Resistor

NET  'VMON_DCDC<key_1_1>'          R<key_170_30>8-2   C<key_172_30>1-1    # Voltage Monitor Filter Res Cap Pin

NET  'GROUND'                                         C<key_172_30>1-2    # Voltage Monitor Filter Cap Ground