Disco-Kraken Not Installed Components --------------=====----------------------- Good for Production ----------------------- Rev. 19-Mar-2025 This file lists the Reference Designators of 20 components that are not installed by the assembly vendor on the Disco-Kraken circuit board. You will see these components in Silk-Screen on the circuit board but they are not being installed by the assembly vendor. These 20 "not installed" components are not included in the Bill of Materials and they are not included in the SMD component XY Placement Data assembly documentation files. In the following table of "not installed" components the PCB Geometry (aka footprint) is also listed to aid in locating them on the circuit board. During assembly note that the Solder Paste Stencil typically does apply Solder Paste to one of the pads on some of these "not installed" components. Not Installed Location Reference PCB ----------------------- Designators Geometry X Y Side -------------- -------- ----------------------- C955B Pad_0603 161.80 27.20 Bot C956B Pad_0603 159.60 27.20 Bot JMP1A Res_0603 220.40 229.00 Bot JMP1003 Res_0603 26.00 148.00 Bot JMP1004 Res_0603 26.00 150.00 Bot JMP1006 Res_0603 46.00 131.00 Bot JMP1052 Res_0603 47.00 182.50 Bot JMP1054 Res_0603 42.00 182.50 Bot JMP1056 Res_0603 37.00 182.50 Bot JMP1057 Res_0603 37.00 167.50 Bot JMP1171 Res_0603 62.00 66.50 Bot JMP1174 Res_0603 62.50 33.50 Bot JMP1175 Res_0603 62.50 36.00 Bot JMP1176 Res_0603 56.50 36.00 Bot R927 Res_0603 150.20 30.00 Bot R1020 Res_0603 59.60 141.50 Top R1066 Res_0603 33.00 170.00 Bot R1261 Res_0603 78.50 173.50 Bot R1409 Res_0603 26.00 227.50 Bot Y1502 LVDS_OSC 97.00 184.00 Top WTERM There are a number of these single labeled open vias on the DK board. The assembly vendor does not install anything at these locations. TOMcat_Mezzanine Silk-Screen only in the bump out on the South edge of the card. This is just Silk-Screen of a mezzanine board that is not installed by the assembly vendor.