#             This is a Key In  Net List  file for
#           the   CB-Fan  2  for the HAWC Experiment
#
#                 VME Backplane P1 Connector
#                --------------====----------
#
#
#                                                 Original Rev. 17-FEB-2012
#                                              Most Recent Rev. 20-FEB-2012


#  This file includes all the nets from the VME "P1" connector
#  including the "Z" and "D" columns of this connector.  Only
#  the pins in this connector that have signals that are used
#  in the  CB-Fan  2 design are assigned with  NET  statements.
#  CB-Fan uses only:  +3.3V Power,  +5.0V Power, and Ground from
#  the P1 connector.




#  The "Z" Column
#  --------------

NET 'GROUND'  P1-Z2    # VME-64X ground pin

NET 'GROUND'  P1-Z4    # VME-64X ground pin

NET 'GROUND'  P1-Z6    # VME-64X ground pin

NET 'GROUND'  P1-Z8    # VME-64X ground pin

NET 'GROUND'  P1-Z10   # VME-64X ground pin

NET 'GROUND'  P1-Z12   # VME-64X ground pin

NET 'GROUND'  P1-Z14   # VME-64X ground pin

NET 'GROUND'  P1-Z16   # VME-64X ground pin

NET 'GROUND'  P1-Z18   # VME-64X ground pin

NET 'GROUND'  P1-Z20   # VME-64X ground pin

NET 'GROUND'  P1-Z22   # VME-64X ground pin

NET 'GROUND'  P1-Z24   # VME-64X ground pin

NET 'GROUND'  P1-Z26   # VME-64X ground pin

NET 'GROUND'  P1-Z28   # VME-64X ground pin

NET 'GROUND'  P1-Z30   # VME-64X ground pin

NET 'GROUND'  P1-Z32   # VME-64X ground pin




#  The "A" Column
#  --------------

NET 'GROUND'        P1-A9    # VME ground pin

NET 'GROUND'        P1-A11   # VME ground pin

NET 'GROUND'        P1-A15   # VME ground pin

NET 'GROUND'        P1-A17   # VME ground pin

NET 'GROUND'        P1-A19   # VME ground pin


NET 'VME_IACK_LOOP' P1-A21   # VME Interrupt_Acknowledge_In_*   'VME_IACKIN_B'
NET 'VME_IACK_LOOP' P1-A22   # VME Interrupt_Acknowledge_Out_*  'VME_IACKOUT_B'


NET 'VME_5V'        P1-A32   # VME +5 Volt Bus Power




#  The "B" Column
#  --------------


#  Note that the 3 of the 4 Bus Grant In-Out pin pairs are just tied
#  together.  The Bus_GRANT_1 In-Out pair is brought onto the  CB-Fan -2
#  card where it is used to pass the start up signal from the power up
#  supervisor on one  CB-Fan  card to the  CB-Fan  card in the next hight slot.

NET 'BUS_GRANT_0'  P1-B4   P1-B5    # P1-B4  is VME Bus_Grant_0_In_*  signal
                                    # P1-B5  is VME Bus_Grant_0_Out_* signal

NET 'BUS_GRANT_1'  P1-B6   P1-B7    # P1-B6  is VME Bus_Grant_1_In_*  signal
                                    # P1-B7  is VME Bus_Grant_1_Out_* signal

NET 'BUS_GRANT_2'  P1-B8   P1-B9    # P1-B8  is VME Bus_Grant_2_In_*  signal
                                    # P1-B9  is VME Bus_Grant_2_Out_* signal

NET 'BUS_GRANT_3'  P1-B10  P1-B11   # P1-B10 is VME Bus_Grant_3_In_*  signal
                                    # P1-B11 is VME Bus_Grant_3_Out_* signal


NET 'GROUND'       P1-B20   # VME ground pin

NET 'GROUND'       P1-B23   # VME ground pin


NET 'VME_5V'       P1-B32   # VME +5 Volt Bus Power




#  The "C" Column
#  --------------

NET 'GROUND'         P1-C9    # VME ground pin


NET 'VME_5V'         P1-C32   # VME +5 Volt Bus Power




#  The "D" Column
#  --------------

NET 'GROUND'   P1-D2    # VME-64X ground pin  Extended Pin

NET 'VME_3V3'  P1-D12   # VME-64X  +3.3 Volt Bus Power

NET 'VME_3V3'  P1-D14   # VME-64X  +3.3 Volt Bus Power

NET 'VME_3V3'  P1-D16   # VME-64X  +3.3 Volt Bus Power

NET 'VME_3V3'  P1-D18   # VME-64X  +3.3 Volt Bus Power

NET 'VME_3V3'  P1-D20   # VME-64X  +3.3 Volt Bus Power

NET 'VME_3V3'  P1-D22   # VME-64X  +3.3 Volt Bus Power

NET 'VME_3V3'  P1-D24   # VME-64X  +3.3 Volt Bus Power

NET 'VME_3V3'  P1-D26   # VME-64X  +3.3 Volt Bus Power

NET 'VME_3V3'  P1-D28   # VME-64X  +3.3 Volt Bus Power

NET 'VME_3V3'  P1-D30   # VME-64X  +3.3 Volt Bus Power

NET 'GROUND'   P1-D31   # VME-64X ground pin  Extended Pin