# # This is a Key In Net List file for # the H-CLK card for HAWC # Backplane P2 Connector # ------------====------------ # # Original Rev. 21-Apr-2011 # Most Recent Rev. 26-Oct-2011 # This file includes all the nets from the "P2" connector # including the "Z" and "D" columns of this connector. # Only the pins in this connector that have signals that are # used in the H-CLK design have Mentor Graphics NET statements. # The "Z" Column # -------------- NET 'GROUND' P2-Z2 P2-Z4 P2-Z6 P2-Z8 P2-Z10 # VME-64X ground pin NET 'GROUND' P2-Z12 P2-Z14 P2-Z16 P2-Z18 P2-Z20 # VME-64X ground pin NET 'GROUND' P2-Z22 P2-Z24 P2-Z26 P2-Z28 P2-Z30 # VME-64X ground pin NET 'GROUND' P2-Z32 # VME-64X ground pin # The H-CLK makes no P2 connection to "Z" column odd number pins. # The "A" Column # -------------- # # All "A" Column pins are all "User Defined". # H-Clk uses just 2 of these pins to bring the battery backup # power supply for the GPS receiver on-card. This backup supply # is assumed to be something like a 9V or 10V rechargable battery. # It is fused on-card but also needs to be fuse at the battery. NET 'GPS_BAT_POS' P2-A1 # GPS Battery Positive NET 'GROUND' P2-A2 # GPS Battery Negative # The "B" Column # -------------- NET 'GROUND' P2-B2 P2-B12 P2-B22 P2-B31 # VME ground pin ## ## NET 'VME_5V' P2-B1 P2-B13 P2-B32 # VME +5 Volt Bus Power # The H-Clk will get 5V Vcc from the 3 pins on P1 only # The H-CLK makes no P2 connection to "B" column pins 3:11, 14:21, 23:30. # The "C" Column # -------------- # # All "C" Column pins are user defined. # H-Clk does not use any of these pins. # The "D" Column # -------------- NET 'GROUND' P2-D31 # VME-64X ground pin Extended Pin # The H-CLK makes no P2 connection to "D" column pins 1:30, 32.