Aluminum Inner Preamp Box
                -----------------------------

                                                Original Rev. 26-JAN-2008
                                                 Current Rev. 28-JAN-2008


Please make the following parts so that I can assembly one copy
of the Aluminum Inner Preamp Box:


     Quantity          Item - Drawing
     --------      --------------------------
         8         16.8" Aluminum Corner Bracket
         4         20.8" Aluminum Corner Bracket
         2         17" x 18" Aluminum Plate
         2         22" x 18" Aluminum Plate
         2         22" x 17" Aluminum Plate


This box is assembled using  116  10-24  5/8" button head stainless
steel cap screws with stainless steel external tooth lock washers.

Please feel free to suggest any design changes that would make these
parts easier for you to machine.

As designed all of these parts are "symmetric",  i.e. one can not
make a mirror image of a part.

As designed, all of the holes along a given surface of a bracket or
along a given edge of a plate  have a constant pitch.

Please do not worry if an extra hole or two gets poked in some part.
After the basic box is made I will be adding many holes to mount
the internal components in this box and such.

The purpose of this box it to provide mechanical support and
protection for the electrical parts inside of it and to provide
electrostatic shielding.  To provide good electrostatic shielding
this box is made out of Aluminum.

After the basic box is finished and after I have drilled all of the
additional holes in it this box will be painted white.

Account Number:  61-5797

I have already ordered the material to make this box and I will
bring it to the shop when it arrives.  If additional material is
needed please feel free to order it.

These drawings are also on the web at:

  www.pa.msu.edu/~edmunds/LArTPC/T962/Preamp_Box/Inner_Box/


Thank you for making all of these parts.