Nylon Support Bracket
                   -------------------------

                                                Original Rev. 3-APR-2008
                                                 Current Rev. 4-APR-2008


Please make  4  of these "Nylon Support Brackets".  Each of these
Nylon Support Brackets consists of a  6" long, 2" wide, 1" thick
block of nylon.


There is a cut made in both ends of this block to make steps
which rest on the inner and outer preamp boxes.  Near the middle
of the block there is a taped hole for a 10-24 screw that holds
the block in place.


Please feel free to suggest any design changes that would make
these parts easier for you to machine.


The purpose of these 4 brackets is to provide part of the support
that holds the inner preamp box inside of the outer steel preamp
box and provides electrical insulation between them.


Account Number:  61-5797


I have obtained all of the raw material that I believe is necessary
to make these brackets.  Please feel free to order anything else
that you need.


This description and these drawings are also on the web at:

  www.pa.msu.edu/~edmunds/LArTPC/T962/Preamp_Box/Nylon_Bracket/


Thank you for making these parts.