Power Connector Bracket
                 ---------------------------

                                                Original Rev. 2-APR-2008
                                                 Current Rev. 3-APR-2008


Please make  4  of the "Power Connector Brackets".  Each Power
Connector Bracket consists of a  2.5" long, 1.25" tall, 1/2" thick
aluminum block.


In this block a  1" by 1"  slot is cut  (to hold the power connector)
and  two holes are drilled for 10-24 screws to pass through to mount
the bracket to the preamplifier box.  Please drill the holes
starting from the surface indicated in the drawing.  In that way
it will not matter if these holes wander as the 1.25" deep hole
is drilled.


Please feel free to suggest any design changes that would make
these parts easier for you to machine.


The purpose of these 4 brackets is to mount the "Jones" DC power
connectors to the edge bars in the outer steel preamp box.


Account Number:  61-5797


I have obtained all of the raw material that I believe is necessary
to make these brackets.  Please feel free to order anything else
that you need.


This description and these drawings are also on the web at:

  www.pa.msu.edu/~edmunds/LArTPC/T962/Preamp_Box/Power_Connector/


Thank you for making these parts.