Two types of  3M  0.1" x 0.1"  connectors were used in making the
T962 readout cables.  They are:


3M  34 pin connector 89134-0101
Used on the PFC-16 end of the External Readout Cables
-----------------------------------------------------
        
Conductor Accommodation:     26 & 28 AWG Stranded

Contact Material:            Phosphor Bronze

Current Rating:              1 Ampere

Withstanding Voltage:        1000 Vrms at Sea Level

Insulation Resistance:       >1 X 10**9 Ohms at 500 Vdc

Insulation Material:         Glass Filled Polyester (PBT)

Flammability:                UL 94V-0

Temperature Rating:          -55 Degree C to +105 Degree C

Underplating:                50 microinches (1.27 micrometers) Nickel

Wiping Area (Plating):       30 microinches (0.76 micrometer) Gold

Contact Termination Area Plating:               None    



3M  50 pin connector  3425-6600
Used on the BVDC end of the Internal Readout Cables
---------------------------------------------------

Wire Accommodation:          26 and 28 AWG Solid and Stranded

Contact Material:            Copper Alloy

Current Rating:              1 A

Withstanding Voltage:        1000 VRMS at Sea Level

Insulation Resistance:       > 1 × 10**9 Ohms at 500 VDC

Insulation Material:         Glass Filled Polyester (PBT)

Flammability:                UL 94V-0

Temperature Rating:          -55 Degree C to +105 Degree C

Underplating and U-Slot:     100 microinches (2.54 micrometers) Nickel

Wiping Area Plating:         30 microinches (0.76 micrometers) Gold