Cable between the FM Card Front Paddle and the EDT Card Connector ------------------------------------------------------------------- Original Rev. 26-DEC-1997 Front Paddle Board EDT ------------------- EDT Pin Amp-Pin Signal Signal Num Color Number Name ------ --- ------- ------- -------- MSB0+ 43 Br/Tan 27 MSA_Out(13)+ \ MSB0- 44 Tan/Br 28 MSA_Out(13)- \ \ MSB1+ 45 Pink/Tan 25 MSA_Out(12)+ | MSB1- 46 Tan/Pink 26 MSA_Out(12)- | | MSB2+ 47 Or/Tan 23 MSA_Out(11)+ | MSB2- 48 Tan/Or 24 MSA_Out(11)- | | MSB3+ 49 Yel/Tan 21 MSA_Out(10)+ | MSB3- 50 Tan/Yel 22 MSA_Out(10)- | | | MSB4+ 3 Gm/Tan 19 MSA_Out(9)+ | MSB4- 4 Tan/Gm 20 MSA_Out(9)- | | MSB5+ 5 Bl/Tan 17 MSA_Out(8)+ | MSB5- 6 Tan/Bl 18 MSA_Out(8)- | | MSB6+ 7 V/Tan 15 MSA_Out(7)+ | MSB6- 8 Tan/V 16 MSA_Out(7)- | | MSB7+ 9 Gry/Tan 13 MSA_Out(6)+ | Data Cable MSB7- 10 Tan/Gry 14 MSA_Out(6)- | | connects to | MSB8+ 51 Pink/Br 11 MSA_Out(5)+ | Front-PB MSB8- 52 Br/Pink 12 MSA_Out(5)- | | MSA_OUT(15:0) MSB9+ 53 Or/Br 9 MSA_Out(4)+ | MSB9- 54 Br/Or 10 MSA_Out(4)- | | MSB10+ 55 Yel/Br 7 MSA_Out(3)+ | MSB10- 56 Br/Yel 8 MSA_Out(3)- | | MSB11+ 57 Gm/Br 5 MSA_Out(2)+ | MSB11- 58 Br/Gm 6 MSA_Out(2)- | | | MSB12+ 11 Bl/Br 3 MSA_Out(1)+ | MSB12- 12 Br/Bl 4 MSA_Out(1)- | | MSB13+ 13 V/Br 1 MSA_Out(0)+ | MSB13- 14 Br/V 2 MSA_Out(0)- | | MSB14+ 15 Gry/Br 31 MSA_Out(15)+ | MSB14- 16 Br/Gry 32 MSA_Out(15)- | | MSB15+ 17 Or/Pink 29 MSA_Out(14)+ | MSB15- 18 Pink/Or 30 MSA_Out(14)- | / Ground 40 Or/Violet 33 Ground / Ground 80 Violet/Or 34 Ground / Notes: The above pinout makes the following map of connections FM MSA_Out(13:0) goes to EDT MSB0 through MSB13 FM MSA_Out(15:14) goes to EDT MSB14, MSB15 I.E. The EDT connection is numbered in the opposite direction (EDT MSB0 is the most significant) and they use the 14 most significant bits not the 14 least significant. Pins 33 and 34 of the Front Paddle MSA_Out(15:0) connector are wired to Ground and are used for Ground connections in the EDT Cable. Front Paddle Board EDT ------------------- EDT Pin Amp-Pin Signal Signal Num Color Number Name ------ --- ------- ------- -------- PSTRB+ 64 Br/W 3 MSA_Out(17)+ \ MSB15- 65 W/Br 4 MSA_Out(17)- \ \ FRAME+ 68 Or/W 7 MSA_Out(19)+ | Control Cable FRAME- 69 W/Or 8 MSA_Out(19)- | | connects to LINE+ 66 Yel/W 11 MSA_Out(21)+ | Front-PB LINE- 67 W/Yel 12 MSA_Out(21)- | MSA_OUT(31:16) / FRMRST/EXP+ 78 Bl/W 33 aux 025 pins / FRMRST/EXP- 79 W/Bl 34 aux 025 pins / Note that FRMRST/EXP+, FRMRST/EXP- is a signal from the EDT to the FM Card. All of the other signals above are from FM to EDT. In some of the FIRC Documentation it may say that the EDT MC0+,MC0- signal is used to control the camera integration but the FRMRST/EXP signal is the integration control signal used by the current software. The FRMRST/EXP signal is routed from the auxiliary 25 mil square pins on the Front Paddle Board to the TOM Module where it is converted to differential ECL and sent on the backplane as Backplane Timing_Signal(7). EDT AMP Pin Housing Signal Num Color Pin Num ------ --- ------- -------- FLDID+ 70 Pink/Yel 1 \ FLDID- 71 Yel/Pink 2 \ \ MC1+ 74 V/W 3 | MC1- 75 W/V 4 | | MC2+ 76 Gry/W 5 | MC2- 77 W/Gry 6 | | MC0+ 78 Gm/W 7 | MC0- 79 W/Gm 8 | Un-Used | AIA Signals -------------------------------------------- | in the Cable | SCNTLI+ 24 Tan/W 9 | NO Connection to SCNTLI- 25 W/Tan 10 | Front-PB | ID0+ 26 Pink/Gry 11 | ID0- 27 Gry/Pink 12 | | ID1+ 28 Pink/V 13 | ID1- 29 v/Pink 14 | / SCNTLO+ 32 ?? Pink/W 15 / SCNTLO- 22 ?? W/Pink 16 / All pairs that are not Connected at the EDT connector end have AMP pins crimped onto them and have been loaded into a housing in random order.