This request for quotes is for the manufacture of three separate printed circuit boards referred to as the "A_Card", the "D_Card", and the "M_Card". The successful bidder will receive the Purchase Order to build all three cards. A plot of each card is included with this RFQ. All data will be provided to the manufacture on 3 1/2" IBM PC disks in Gerber and Excellon format. The following is a list of 4 suggested vendors. If you have had good luck with any other printed circuit board manufacturers then please add them to this list. These are all straight forward boards so I do not care what company gets the order. Circuit Center Inc. 4738 Gateway Circle Dayton, Ohio 45440 Phone: 513-435-2131 Edie James Sovereign Circuits 12808 DeBartolo Drive North Jackson, OH 44451 Phone: (330) 538-3900 FAX: (330) 538-3820 Ron Bull Electro Circuits, Inc 1651 Mitchell Blvd. Schaumburg, IL 60193 Phone: 708-351-5015 Contact: Dennis Holtane Overnite Protos 1550 Higgins Road Elk Grove, IL 60007 Phone: 847-290-8697 FAX: 847-290-8691 A short description of each card follows: The A_Card ---------- Circuit board name: A_Card Rev A Quantity to be Manufactured: 20 boards Circuit Board Material: G10 (FR4) Overall Circuit Board Thickness: This circuit board should have a nominal thickness of 0.062 inch. Overall Circuit Board Size: 3.500" x 9.000" rectangular board. There are no cutouts or special shapes. The board outline, as indicated by the center of the line drawn in the Test Plot, indicates the real finished board size. Layers: 6: 2 external signal layers, 4 internal power/ground planes Copper thickness: 1 oz copper to be used on all trace and planes layers Solder Mask: BOTH SIDES (different mask on component and solder sides) Use a Liquid Photo Imagable solder mask. Solder plating: Only the area of copper NOT covered by the solder mask should be solder plated. (i.e. Solder Mask over Bare Copper). Silk Screen: Both sides (different on component and solder sides) Holes: There are 4 different hole sizes. 173 holes finished size 0.013" all are plated 393 holes finished size 0.038" all are plated 24 holes finished size 0.050" all are plated 8 holes finished size 0.113" all are UN-plated Delivery Schedule: 4 weeks after approval of photo-plots The D_Card ---------- Circuit board name: D_Card Rev A Quantity to be Manufactured: 5 boards Circuit Board Material: G10 (FR4) Overall Circuit Board Thickness: This circuit board should have a nominal thickness of 0.062 inch. Overall Circuit Board Size: 3.500" x 9.000" rectangular board. There are no cutouts or special shapes. The board outline, as indicated by the center of the line drawn in the Test Plot, indicates the real finished board size. Layers: 6: 2 external signal layers, 4 internal power/ground planes Copper thickness: 1 oz copper to be used on all trace and planes layers Solder Mask: BOTH SIDES The same solder mask is used on both sides. Use a Liquid Photo Imagable solder mask. Solder plating: Only the area of copper NOT covered by the solder mask should be solder plated. (i.e. Solder Mask over Bare Copper). Silk Screen: Silk screen on the component side only Holes: There are 3 different hole sizes. 86 holes finished size 0.013" all are plated 552 holes finished size 0.038" all are plated 4 holes finished size 0.113" all are UN-plated Delivery Schedule: 4 weeks after approval of photo-plots The M_Card ---------- Circuit board name: M_Card Rev A Quantity to be Manufactured: 5 boards Circuit Board Material: G10 (FR4) Overall Circuit Board Thickness: This circuit board should have a nominal thickness of 0.062 inch. Overall Circuit Board Size: 6.000" x 9.400" rectangular board. There are no cutouts or special shapes. The board outline, as indicated by the center of the line drawn in the Test Plot, indicates the real finished board size. Layers: 2: 2 external signal / plane layers Copper thickness: 1 oz copper to be used on both layers Solder Mask: BOTH SIDES The same solder mask is used on both sides. Use a Liquid Photo Imagable solder mask. Solder plating: Only the area of copper NOT covered by the solder mask should be solder plated. (i.e. Solder Mask over Bare Copper). Silk Screen: Silk screen on the component side only Holes: There are 3 different hole sizes. 828 holes finished size 0.038" all are plated 2 holes finished size 0.113" all are UN-plated 17 holes finished size 0.140" all are plated Delivery Schedule: 4 weeks after approval of photo-plots