QC 6 VERSION 5

QC 6 VERSION 5.8: 31-Jul-01 13:31:55

LIST OF FIBERS/TILES WITH RESPONSE < 80%

FOR ANL035 Scan A

PMT	LAYER	CELL	TILE	SLOT	%DEV	SOLUTION

4	10	D4-E	1	1	-26.0	Special Tile
11	1	A13-O	9	35	-47.6	Replaced Fiber
11	3	A13-O	9	35	-50.2	Replaced Fiber
12	2	A13-E	20	46	-22.7	Reseated Profile
16	5	B12-E	19	52	-20.9	Replaced fiber
16	7	B12-E	19	52	-20.2	Replaced fiber
16	7	B12-E	27	60	-21.3	Reseated profile
17	11	D5-O	4	21	-28.5	Replaced tiles
17	11	D5-O	5	22	-24.1
17	11	D5-O	11	28	-22.5
17	11	D5-O	33	50*	-75.7	On side of tile - added shims
17	11	D5-O	49	66*	-56.7	Loose profile - added shims on both sides
17	11	D5-O	65	82*	-31.8	Loose profile - added shim
18	11	D5-E	1	18*	-23.4	Wide slot - added shim
18	11	D5-E	4	21	-31.5	Replaced tiles
18	11	D5-E	5	22	-28.6
18	11	D5-E	11	28	-22.4
22	1	A14-E	15	66*	-32.1	Loose profile - added shim
22	2	A14-E	7	58	-24.3	Reseated profile
22	3	A14-E	12	63	-28.7	On side of tile - fixed
23	5	B13-O	23	83	-22.4	Replaced fiber
23	7	B13-O	23	83	-20.1	Replaced fiber
24	7	B13-E	6	66*	-27.6	On side of tile - fixed
24	7	B13-E	9	69	-21.2	Reseated profile
24	7	B13-E	22	82*	-24.6	Reseated profile
29	1	A15-O	3	82*	-65.5	Loose profile - added shim
29	3	A15-O	12	91	-36.3	On side of tile - fixed
30	2	A15-E	25	104	-20.9	Reseated profile
37	8	D6-O	41	123	-20.3	Tile not centered - fixed
37	10	D6-O	41	123	-17.5
37	8	D6-O	45	127	-23.5	Thick paint in slots preventing profiles from seating - cleaned slots and reseated profiles
37	8	D6-O	63	145	-20.9
37	8	D6-O	66	148	-20.5
37	8	D6-O	71	153	-23.7
37	8	D6-O	72	154	-23.5
37	9	D6-O	38	120	-22.6	Replaced fiber
37	11	D6-O	38	120	-18.2	Replaced fiber
38	8	D6-E	70	152	-26.2	On side of tile - fixed
38	8	D6-E	71	153	-21.1	Loose profile - reseated
38	9	D6-E	44	126	-53.5	Replaced fiber
38	11	D6-E	44	126	-51.8	Replaced fiber
38	11	D6-E	5	87	-56.0	Tile not centered - fixed
43	6	B15-O	1	123	-21.2	Reseated profile

QC 6 VERSION 5.8: 3-Aug-01 09:16:50

LIST OF FIBERS/TILES WITH RESPONSE < 80%

FOR ANL035 Scan B

PMT	LAYER	CELL	TILE	SLOT	%DEV	SOLUTION

4	10	D4-E	1	1	-26.0	Special tile
12	2	A13-E	20	46	-22.7	Replaced fiber
17	11	D5-O	12	29	-20.1	Cleaned paint from slot, reseated profile
17	11	D5-O	15	32	-20.2	Cleaned paint from slot, reseated profile
22	2	A14-E	7	58	-20.6	Reseated profile
30	3	A15-E	27	106	-21.5	Reseated proflie
37	9	D6-O	38	120	-28.8	Replaced fiber again
37	11	D6-O	38	120	-26.5	Replaced fiber again
41	2	A16-O	13	122	-20.6	Reseated profile
43	6	B15-O	1	123	-23.3	Reseated profile
43	6	B15-O	23	145	-21.4	Reseated profile

QC 6 VERSION 5.8: 8-Aug-01 16:13:57

LIST OF FIBERS/TILES WITH RESPONSE < 75%

FOR ANL035 Scan C

PMT	LAYER	CELL	TILE	SLOT	%DEV	SOLUTION

4	10	D4-E	1	1	-26.0	Special tile

Additional repairs made at ANL following the Cs Scans - Ivars

Fiber A L2,A14E #22 (MSU#7) was replaced. The original fiber was found to

have a mirrored but unpolished end. It was left in the girder cavity, coiled

up, for potential use (in desperation), but having a -28% deviation.

The complaint about L2,A16Odd #36 (MSU#13) was corrected from the Even side

after observing that profiles #32 thru #36 were not seated sufficiently in

the L2 area. Some "chiropractic" adjustment resulted in tiles shifting

noticeably toward the Odd side. The raw scan results show a definite

improvement in A16Odd (see attached PDF for A14E and A16Odd, L2)

There were two other areas showing larger Odd/Even disparities that

received profile seating adjustment (L5 & L7,A15)from the Even side. It's

harder to tell the effect in the raw scans.