TileCalorimeter

 
A summary of the scan results for all of the US EB modules can be seen here.

Details of the modules instrumented at ANL can be found in Dave Underwood's page and in Larry Nodulman's page.

A comparison of the scans for modules that have been scanned by both LED and Cs sources can be found here.

The following table gives some detail for each module instrumented at MSU.  The Check Sheet and Scan Results columns contain links to those documents.  Scan result ntuples contain one row for each tile with the following columns:  CELL   LAYR   TILE  SLOT  ADCOL  ADCEL  ADCOC  ADCEC ADCOR ADCER, where

• CELL = nxx with n = 0:3 for readout depths A:D, and xx = the eta index of the cell;
• LAYR = 0  (1:11) for samples normalized to 100 over all tiles on this PMT (within a tile layer);
• TILE is the tile number within the CELL, starting from the ITC end;
• SLOT is the fiber slot number, cummulative over cells, also starting from the ITC end with the first number offset so that all layers end with slot number 157 at the flat (non ITC) end;
• ADCO(E)L(C) is the ADC value for that cell for the odd (even) side PMT, normalized to give an average of 100 for tiles in this PMT-layer (PMT-cell), and
• ADCO(E)R is the unnormalized peak height.