QC0: Module Inspection

Inspect the module and record the location of any of the following problems:
  1. Glue remaining in slots
  2. Spacer rings displaced into slots
  3. Burrs on weld bars at edge of girder
  4. Abnormal spacing between submodules
  5. Paint runs or flakes in slots or girder
  6. Warped or undersize slots (check any suspicious slots with a gauge block)
  7. Oil or other contaminents on surfaces
Repair any problems.

Sign and date the check sheet.

Report any serious or recurrent problems.

Return to Tilecal Optical Instrumentation

maintained by: - RJM